Search

Resonating MEMS mass sensors are microdevices with broad applications in fields such as bioscience and biochemistry. Their advantageous surface-to-volume ratio makes their resonant frequency highly sensitive to variations in their mass induced by surface depositions. Recent global challenges, such as water quality monitoring or pandemic containment, have increased the need for low-cost (even disposable), rapidly fabricated microdevices as suitable detectors. Resonant MEMS mass sensors are among the best candidates. This paper introduces a simple and robust fabrication of polymeric piezoelectric resonating MEMS mass sensors. The microfabrication technology replaces the traditional layer-by-layer micromachining techniques with laser micromachining to gain extra simplicity. Membrane-based resonant sensors have been fabricated to test the technology. Their characterization results have proven that the technology is robust with good reproducibility (around 2% batch level variations in the resonant frequency). Initial tests for the MEMS mass sensors' sensitivity have indicated a sensitivity of 340 Hz/ng. The concept could be a starting point for developing low-cost MEMS sensing solutions for pandemic control, health examination, and pollution monitoring. [ABSTRACT FROM AUTHOR]

This paper successfully demonstrates the potential of weakly coupled piezoelectric MEMS (Micro-Electro-Mechanical Systems) gravimetric sensors for the detection of ultra-fine particulates. As a proof-of-principle, the detection of diesel soot particles of 100 nanometres or less is demonstrated. A practical monitoring context also exists for diesel soot particles originating from combustion engines, as they are of serious health concern. The MEMS sensors employed in this work operate on the principle of vibration mode-localisation employing an amplitude ratio shift output metric for readout. Notably, gains are observed while comparing parametric sensitivities and the input referred stability for amplitude ratio and resonant frequency variations, demonstrating that the amplitude ratio output metric is particularly suitable for long-term measurements. The soot particle mass directly estimated using coupled MEMS resonators can be correlated to the mass, indirectly estimated using the condensation particle counter used as the reference instrument. [ABSTRACT FROM AUTHOR]