Search

For decades, soft sensors have been extensively renowned for their efficiency in real-time tracking of expensive variables for advanced process control. However, despite the diverse efforts lavished on enhancing their models, the issue of label sparsity when modeling the soft sensors has always posed challenges across various processes. In this paper, a fledgling technique, called co-training, is studied for leveraging only a small ratio of labeled data, to hone and formulate a more advantageous framework in soft sensor modeling. Dissimilar to the conventional routine where only two players are employed, we investigate the efficient number of players in batch processes, making a multiple-player learning scheme to assuage the sparsity issue. Meanwhile, a sliding window spanning across both time and batch direction is used to aggregate the samples for prediction, and account for the unique 2D correlations among the general batch process data. Altogether, the forged framework can outperform the other prevalent methods, especially when the ratio of unlabeled data is climbing up, and two case studies are showcased to demonstrate its effectiveness. [ABSTRACT FROM AUTHOR]

To solve the problems of poor stability and low monitoring precision in the online detection of rice moisture in the drying tower, we designed an online detection device for rice moisture at the outlet of the drying tower. The structure of a tri-plate capacitor was adopted, and the electrostatic field of the tri-plate capacitor was simulated using COMSOL software. A central composite design of three factors and five levels was carried out with the thickness, spacing, and area of the plates as the influencing factors and the capacitance-specific sensitivity as the test index. This device was composed of a dynamic acquisition device and a detection system. The dynamic sampling device was found to achieve dynamic continuous sampling and static intermittent measurements of rice using a ten-shaped leaf plate structure. The hardware circuit of the inspection system with STM32F407ZGT6 as the main control chip was designed to realize stable communication between the master and slave computers. Additionally, an optimized BP neural network prediction model based on the genetic algorithm was established using the MATLAB software. Indoor static and dynamic verification tests were also carried out. The results showed that the optimal plate structure parameter combination includes a plate thickness of 1 mm, plate spacing of 100 mm, and relative area of 18,000.069 mm2 while satisfying the mechanical design and practical application needs of the device. The structure of the BP neural network was 2-90-1, the length of individual code in the genetic algorithm was 361, and the prediction model was trained 765 times to obtain a minimum MSE value of 1.9683 × 10−5, which was lower than that of the unoptimized BP neural network with an MSE of 7.1215 × 10−4. The mean relative error of the device was 1.44% under the static test and 2.103% under the dynamic test, which met the accuracy requirements for the design of the device. [ABSTRACT FROM AUTHOR]

Ultrawideband (UWB) wireless communication is a promising spread-spectrum technology for accurate localization among devices characterized by a low transmission power, a high rate and immunity to multipath propagation. The accurately of the clock synchronization algorithm and the time-difference-of-arrival (TDOA) localization algorithm provide precise position information of mobile nodes with centimeter-level accuracy for the UWB localization system. However, the reliability of target node localization for multi-area localization remains a subject of research. Especially for dynamic and harsh indoor environments, an effective scheme among competing target nodes for localization due to the scarcity of radio resources remains a challenge. In this paper, we present RMLNet, an approach focus on the medium access control (MAC) layer, which guarantees general localization application reliability on multi-area localization. Specifically, the design requires specific and optimized solutions for managing and coordinating multiple anchor nodes. In addition, an approach for target area determination is proposed, which can approximately determine the region of the target node by the received signal strength indication (RSSI), to support RMLNet. Furthermore, we implement the system to estimate the localization of the target node and evaluate its performance in practice. Experiments and simulations show that RMLNet can achieve localization application reliability multi-area localization with a better localization performance of competing target nodes. [ABSTRACT FROM AUTHOR]

With recent adoption of Wireless Sensor-Actuator Networks (WSANs) in industrial automation, wireless control systems have emerged as a frontier of industrial networks. Hence, it has been shown that existing standards and researches concentrate on the reliability and real-time performance of WSANs. The multipath retransmission scheme with multiple channels is a key approach to guarantee the deterministic wireless communication. However, the efficiency of resource scheduling is seldom considered in applications with diverse data sampling rates. In this paper, we propose an efficient resources scheduling algorithm for multipath retransmission in WSANs. The objective of our algorithm is to improve efficiency and schedulability for the use of slot and channel resources. In detail, the proposed algorithm uses the approaches of CCA (clear channel assessment)-Embedded slot and Multiple sinks with Rate Monotonic scheme (CEM-RM) to decrease the number of collisions. We have simulated and implemented our algorithm in hardware and verified its performance in a real industrial environment. The achieved results show that the proposed algorithm significantly improves the schedulability without trading off reliability and real-time performance. [ABSTRACT FROM AUTHOR]