Search

The production and application of ionic liquids (ILs) is often associated with the formation of aqueous effluents. Due to the well-known toxicity and poor biodegradability of those compounds, effective treatments for their removal from aqueous solutions are required. In this work, the Fenton oxidation methodology under optimum operating conditions (50 mg L −1 Fe 3+ , stoichiometric dose of H 2 O 2 , 70 °C and pH 0 = 3) was investigated in eleven different ILs, based in the imidazolium, phosphonium, quaternary ammonium, pyridinium and cholinium families, conjugated with various inorganic and organic anions such as chloride, cyanoborate, cyanamide, thiocyanate, dimethylphosphate and tosylate. The efficacy of the process was evaluated by the analysis of the chemical oxygen demand (COD), total organic carbon (TOC), the acids formed by ILs oxidation and the toxicity of the non-treated and treated aqueous effluents towards the Vibrio fischeri bacteria. It was possible to identify the main compounds produced upon Fenton oxidation in the final aqueous effluents (acetic, oxalic and formic acids) and the results seem to suggest that the Fenton oxidation is a good degradation methodology for most of the ILs tested, achieving TOC conversions in the range of 40–80% and 30–40% for aromatic and aliphatic ILs, respectively. Furthermore, non-toxic effluents were obtained at the end of the treatment for all the ILs investigated with the exception of the cyano-based ones due to the release of highly toxic cyanide species to the aqueous medium. [ABSTRACT FROM AUTHOR]

• CWPO of the neonicotinoid pesticides listed in the EU Watch List was investigated. • Fast elimination (20 min) of all pesticides and aromatic by-products was achieved. • Mineralization yields above 50% were reached, being the final products short-chain acids. • The application of CWPO warranted the complete removal of ecotoxicity. • The versatility of the process was demonstrated in different water matrices. Neonicotinoid pesticides family is nowadays identified as the most important type of insecticides in the world. Their consequent widespread occurrence in the environment represents not only a well-known risk for bees but also a significant negative impact in aquatic ecosystems. In this work, the capability of catalytic wet peroxide oxidation (CWPO) (Fe 3 O 4 -R400/H 2 O 2) as a low-cost and environmentally-friendly system for the treatment of the neonicotinoid pesticides listed in the EU Watch List (Decision 2018/840) (acetamiprid (ACT), clothianidin (CLT), imidacloprid (IMD), thiacloprid (THC) and thiamethoxam (THM)) has been investigated. Remarkably, complete elimination of the pollutants (1000 μg L−1) and the aromatic by-products was reached in 20 min reaction time operating at 25 °C, 1 atm, and pH 0 = 5, with the stoichiometric H 2 O 2 amount (~4–5 mg L−1) and 1 g L−1 catalyst load. The reactivity order of the insecticides decreased as follows: THC > IMD > THM > CLT > ACT, being the pseudo-first order rate constant values within the range of 0.26–0.61 min−1. Notably, high mineralization yields were obtained (>50%), being the final effluents non-toxic. As example, the oxidation pathway of ACT was proposed. Finally, the catalytic system was tested in real surface water. [ABSTRACT FROM AUTHOR]

• HDC is an effective technology for the removal of chlorinated micropollutants. • HDC effluents are non-toxic, with only chlorine-free compounds as reaction products. • The Pd/Al 2 O 3 catalyst shows a relatively high stability upon consecutive applications. • The process versatility is proved in relevant aqueous matrices (mineral, surface and tap water). • HDC shows a high potential as polishing step in DWTPs as it also removes THMs. The presence of micropollutants in fresh waters represents an important challenge for drinking water treatment plants (DWTPs). In particular, the chlorinated ones are especially harmful given their high toxicity and strong bioaccumulation potential. The aim of this work is to evaluate the feasibility of catalytic hydrodechlorination (HDC) for the removal of a representative group of chlorinated micropollutants commonly found in the source waters of DWTPs: the antibiotic chloramphenicol (CAP), the anti-inflammatory diclofenac (DCF), the antibacterial agent triclosan (TCL) and the antidepressant sertraline (SRT). The complete degradation of the isolated micropollutants (3 mg L−1) was achieved in 1 h reaction time using a Pd/Al 2 O 3 catalyst load of 0.25 g L−1 and a H 2 flow rate of 50 N mL min−1. The experimental data were properly described by a pseudo-first order kinetic equation, obtaining degradation rate constants in the range of 0.32–1.56 L g cat −1 min−1 and activation energy values within 42–52 kJ mol−1. In all cases, the final reaction products were chlorine-free compounds and thus, HDC effluents were non-toxic (<0.1 TU). Remarkably, the catalyst showed a suitable stability upon five consecutive applications. The versatility of the process was demonstrated in the treatment of the micropollutants mixture in different aqueous matrices (mineral, surface and tap waters). Strikingly, the removal rate was not affected by the presence of co-existing substances, being the micropollutants completely removed in 15 min with 1 g L−1 catalyst concentration. Finally, the potential of HDC for the removal of trihalomethanes, by-products formed along the oxidation step by chlorination in DWTPs, was also demonstrated. [ABSTRACT FROM AUTHOR]

[Display omitted] • HDC is an effective technology for the removal of chlorinated azole pesticides. • HDC effluents are non-toxic, with only chlorine-free compounds as reaction products. • Intermediates were identified and the reaction mechanism was proposed. • The Pd/Al 2 O 3 catalyst shows a relatively high stability upon consecutive applications. • The process versatility was proved in relevant aqueous matrices (DWTP and tap water). Catalytic hydrodechlorination (HDC) is regarded as a promising purifying technology for drinking water treatment. So far, it has proved to be highly effective for the removal of different groups of chlorinated micropollutants including pharmaceuticals, neonicotinoid pesticides, personal care products or chloroacetic acids. The azole pesticides, recently included in the EU Watch Lists (Decisions 2020/1161 and 2022/1307), are a group of micropollutants of particular concern for drinking water given their high toxicity, persistence, and bioaccumulation potential. In this work, the feasibility of HDC for the removal of a representative group of chlorinated azole pesticides tebuconazole (TEB), tetraconazole (TET), prochloraz (PCZ), penconazole (PEN), metconazole (MET) and imazalil (IMZ)) is demonstrated, and their reactivity is compared with that observed for other halogenated micropollutant groups. Notably, all the pesticides investigated in this work (100 μg L−1) were completely dechlorinated within 30 min under ambient conditions using a 1 wt% Pd/Al 2 O 3 catalyst concentration of 0.25 g L−1 and a H 2 feeding of 50 mL N min−1. The experimental data were accurately described by a pseudo-first order kinetic equation and rate constant values in the range from 1.08 to 2.60 L g cat −1 min−1 were obtained. These values are quite close to those achieved for the most reactive neonicotinoid pesticides and significantly higher than the obtained for chloroacetic acids and most pharmaceuticals (e.g. diclofenac, sertraline or chlorpromazine). From the identification of the generated reaction intermediates and the final non-chlorinated products, sequential reaction pathways were proposed for each pollutant. Remarkably, despite the high toxicity exhibited by the azole pesticides tested, with LC 50 values within the 0.4–7.0 mg L−1 range using A. salina , HDC effluents were non-toxic in all cases. Furthermore, the catalyst showed a remarkable stability upon three consecutive runs. Finally, the versatility of the process was demonstrated in the treatment of real aqueous matrices such as DWTP and tap water, where no significant differences were found either in terms of activity or stability. [ABSTRACT FROM AUTHOR]

• Carbon-encapsulated iron nanoparticles (CE-nFe) prepared by hydrothermal carbonization. • CE-nFe showed a core-shell structure composed by zero-valent iron and graphitized carbon. • The adsorbent led to a fast removal of DCF, MNZ and SMX (less than 30 min). • The saturated adsorbents were effectively regenerated by heterogeneous Fenton oxidation. • The micropollutant's nature affected the regeneration yield in the order: SMX > DCF > MNZ. Adsorption represents the most plausible technology for micropollutants removal from water nowadays. Nevertheless, the regeneration of the saturated carbon materials is still an important challenge, being these solids in practice commonly disposed. This work aims at overcoming this issue by using innovative carbon-encapsulated iron nanoparticles (CE-nFe). This material was synthesized by a low-cost and green method viz. hydrothermal carbonization (HTC), using olive mill wastewater as carbonaceous source. The solid was fully characterized by different techniques (magnetic properties, elemental analyses, N 2 -sorption isotherms, pH PZC , ICP, XRD and TEM). It showed a clear core-shell structure of around 40 nm in diameter. The core was mainly formed by zero-valent iron and the shell by graphitized carbon. Accordingly, it showed an essentially mesoporous structure, with a specific surface area of 169 m2 g−1, and a clear hydrophobic character (pH PZC = 10). Its adsorption performance was investigated using three relevant micropollutants (diclofenac (DCF), sulfamethoxazole (SMX) and metronidazole (MNZ)). A very fast removal of the micropollutants was achieved (30 min at the most, with rate constants in the range of 0.11–0.41 g mg−1 min−1). The adsorption isotherms revealed the vertical packing of the adsorbate molecules onto the adsorbent active centers, being the data successfully described by the GAB model. The saturated adsorbents were effectively regenerated by heterogeneous Fenton oxidation, taking advantage of the iron core of CE-nFe and the opened mesoporous carbon shell. The regeneration efficiency increased with increasing the operating temperature (25–75 °C) and contact time (1–4 h), as well as the H 2 O 2 dose up to 6 g L-1. The micropollutant nature affected the adsorbent regeneration yield in the order: SMX > DCF > MNZ, consistent with their reactivity towards Fenton oxidation. [ABSTRACT FROM AUTHOR]