Search

Highlights • Welding electrospun hollow fiber membrane is firstly applied in ammonia removal. • The effect of membrane thickness on selectivity was intensively investigated. • Self-made membrane with high flux and selectivity favors ammonia recovery. • Self-made membrane demonstrates its potential in membrane absorption application. Abstract Excessive ammonia nitrogen in wastewater seriously endangers ecological environment, so high-flux and selectivity membrane is urgently needed for ammonia removal using membrane absorption (MA). In this paper, a high-performance electrospun hollow fiber membrane was fabricated and solvent vapor welding treatment was adopted to enhance mechanical strength. The post-treatment membrane showed 103.8% higher in the Young's modulus than the pristine membrane. High mechanical strength, porosity and hydrophobicity of the membrane make it superior in mass transfer and selectivity. The effects of membrane thickness, pH and temperature of feed solution on experimental overall mass transfer coefficient (K OE) and selectivity coefficient (S NH3/H2O (g)) were intensively investigated to examine the membrane performance in MA application. The results show K OE is 1.35 * 10−5 m s−1 and S NH3/H2O (g) is 7.58 when pH is 11, which are higher than that of commercial membrane. Moreover, the selectivity can be improved greatly from 6.91 to 9.74 by increasing the thickness of the hollow fiber membrane from 55 ± 5 μm to 115 ± 5 μm. The welded electrospun hollow fiber membrane demonstrates great potential for ammonia removal in MA application. [ABSTRACT FROM AUTHOR]

The practical applications of membrane distillation (MD) are hindered by the absence of effective membranes with high porosity, sufficient strength, and durable wetting repellency for long term operation. In this study, we developed a facile method to construct composite membranes with high MD performance via one-step electrospinning of PVDF solutions blended with hydrophobic silica nanoparticles (NPs). The characterizations reveal that the incorporation of silica NPs have altered the membrane surface morphology and endowed the composite membrane with hierarchical structure on both surface and bulk layers (three-dimensional (3D) superhydrophobic membrane). The hydrophobicity of the membranes can be easily tailored by the dosage of silica NPs, and the water contact angle (WCA) of the membranes can be optimized to be 157 ± 1°, which was close to that of the lotus leaf (160°). Furthermore, the incorporation of silica NPs have promoted the mechanical strength, salt rejection, and water permeation flux of the membranes. The composite membrane containing 7.47 wt% silica NPs (designated as SIL40) can achieve a high MD performance with a water flux of 25.73 kg m −2 h −1 and a permeate conductivity below 5.0 μS cm −1 during a 100 h test-period. The SIL40 also shows a tensile strength and a Young’s modulus of 3.18 and 12.8 MPa, respectively; the values surpassed those of the pristine PVDF membrane (1.5 and 5.4 MPa, respectively). In addition, the MD test indicates that the 3D superhydrophobic membrane exhibits a more durable wetting resistance and a more stable MD performance than the surface-modified superhydrophobic membranes. [ABSTRACT FROM AUTHOR]