Search

[Display omitted] • Revealing the effect of CO 2 on oil potential energy in nanopores. • CO 2 solubility and oil swelling factor explained within nanopores. • Influence of CO 2 on the recovery law of different components in oil. • Analysis of different water film thickness on CO 2 enhanced oil recovery. Understanding the mechanisms of CO 2 extraction or flooding are vital for enhancing oil recovery (EOR) in tight reservoirs. In this study, the CO 2 EOR mechanism in the displacement-affected area (DPAA) and diffusion-affected area (DFAA) of quartz nanopores were thoroughly investigated using molecular dynamics simulation techniques. First, the following two contents were mainly simulated, namely CO 2 flooding oil in the single/double nanopores of DPAA and CO 2 extraction oil in dead-end nanopores of the DFAA with and without the water film. Then, tight oil potential energy, threshold capillary pressure, CO 2 solubility, and oil swelling in nanopores were calculated to clarify the effects of CO 2 on oil transport. Moreover, different CO 2 injection/flowback rates and different water film thicknesses on dead-end nanopores on oil recovery were discussed. In the DPAA, the CO 2 solubility and the oil swelling factor gradually decreased with distance from the CO 2 -oil interface (Y = 0 nm), where the higher the injection rate, the more easily the CO 2 dissolved in the oil. However, the injection rate of CO 2 was inversely proportional to oil recovery. In addition, it took longer for the displacement efficiency in the 6 nm pore of double pores to reach the same displacement efficiency as in the single 6 nm pore. In the DFAA, the effect of flowback rate on the displacement efficiency of oil was relatively low. However, the thickness of the water film was a key factor that affected the oil displacement efficiency in the DFAA. [ABSTRACT FROM AUTHOR]