Search

[Display omitted] • Monomers developed in recent years for preparation of TFC membranes is summarized. • The relationship between monomer structure and membrane properties is established. • The application problems of the IP monomers are summarized. • The outlook for future development of the monomer is also discussed. The thin-film composite (TFC) membranes fabricated by interfacial polymerization (IP) can be applied in the fields of nanofiltration (NF) and reverse osmosis (RO), which has the unparalleled advantages, such as high selectivity and permeability, small capital investment and low energy consumption, thus attracting great research interest in industry and academia field. The performance of TFC membranes is determined by their microstructure and physicochemical properties while IP monomer plays a decisive role regarding both. Over the past few decades, the researchers have paid intensive and sustained efforts to develop new IP monomers. This paper reviews these monomers and the corresponding membranes developed in recent years with the aim of establishing an intrinsic relationship between monomer structure and membrane properties. The excellent performances based on new monomers in enhancing the permeability, selectivity, anti-fouling and chemical stability of NF and RO membranes for liquid treatment are highlighted. Finally, various problems in the monomer development are summarized and the outlook for future development is also discussed. [ABSTRACT FROM AUTHOR]

• Novel polyarylate NF membranes were prepared with oligomeric phenolic resin monomer. • NF membrane exhibited a high Na 2 SO 4 rejection rate and excellent chlorine-resistance. • The influence of preparation parameters on the NF membrane performance was investigated. Conventional water treatment polyamide nanofiltration (NF) membranes often suffer from the degradation of sodium hypochlorite (NaOCl) in sewage or during the process of membrane cleaning and deteriorate the separation performance, which significantly increases the treatment cost. Herein, a novel polyacrylate composite NF membranes were prepared by interfacial polymerization using oligomeric phenolic resin (OPR) and trimesoyl chloride (TMC) as aqueous and organic phase monomer respectively on the polyethersulfone (PES) ultrafiltration supporting membranes. The fabrication parameters, including the pH of the aqueous solution, reaction time and the concentration of the monomer, on the performance of the composite NF membranes were optimized. A series of characterization indicated that the surface of the NF membranes was negatively charged, the molecular weight cut-off (MWCO) and the pore diameter of the polyacrylate membrane were 400 Da and 0.47 nm, respectively. At the optimized preparation conditions, the NF membrane exhibited high Na 2 SO 4 rejection of 98.2% and water flux of 2.42L·m−2·h−1·bar−1, which was superior to most of the polyacrylate NF membranes reported in recent years. Compared with the polyamide membrane, the prepared polyacrylate membrane demonstrated better chlorine-resistant property and still maintained 92.0% Na 2 SO 4 rejection after being treated with NaOCl solution. Moreover, the NF membrane preserved excellent long-term operation stability. The chlorine-resistant NF membrane constructed from OPR monomer has a broad application prospect in the field of high chlorine wastewater treatment. [ABSTRACT FROM AUTHOR]