Search

To solve the problem of micro-electro-mechanical system (MEMS) gyroscope noise, this paper presents a variational mode decomposition (VMD) method based on crow search algorithm. First, the signal was decomposed by variational mode decomposition for optimization of crow search algorithm (CSA-VMD) method. The parameters required by the VMD method (penalty parameter α and decomposition number K) are given by the crow search algorithm, and then the signal is decomposed into the superposition of multiple subsignals, called intrinsic mode functions (IMFs). The sample entropy (SE) corresponding to each IMF is then obtained. By calculating the sample entropy, the noise signal can be divided into pure noise part, mixing part, and temperature drift part. Second, Savitzky–Golay smoothing denoising (SG) is used to filter the mixed noise signal to eliminate the influence of noise. Third, for the filtering of the drift part, the least square support vector machine optimized by the crow search algorithm (CSA-LSSVM) was used to filter, so as to reduce the effect of temperature drift. Finally, the processed signal is reconstructed to achieve the goal of denoising. Through the results, it can be found that the optimized VMD and LSSVM using CSA algorithm can achieve more effective denoising. After using the method proposed in this paper, the angular random walk value is 1.1175 ∗ 10−4°/h/√Hz, and the bias stability is 0.0017°/h. Compared with the original signal, the two signals are optimized by 98.1% and 98.2%, respectively. It can be seen from the experimental results that the proposed CSA-VMD method, SG method, and CSA-LSSVM method can effectively eliminate noise effects. [ABSTRACT FROM AUTHOR]

Recently, the High-G MEMS accelerometer (HGMA) has been used in navigation, mechanical property detection, consumer electronics, and other fields widely. As the core component of a measuring system, it is very crucial to enhance the calibration accuracy of the accelerometer. In order to remove the noises in the accelerometer output signals to enhance its calibration accuracy, a combined denoising method which combines variational mode decomposition (VMD) with permutation entropy (PE) and wavelet threshold is given in this article. For the sake of overcoming the defect of signal distortion caused by the traditional denoising methods, this joint denoising method combines the good decomposition characteristics of VMD and the good denoising ability of wavelet threshold and introduces PE as a judgment criterion to achieve a good balance between denoising effect and signal fidelity. The combination of PE and VMD not only avoids the phenomenon of mode aliasing but also improves the ability to identify the noise components, which makes the wavelet threshold denoising more specific. Firstly, some intrinsic mode functions (IMFs) are obtained by using VMD to decompose the complex signal containing noise which is outputted from the accelerometer. Secondly, the IMF components can be divided into noise IMF components, mixed IMF components, and useful IMF components by PE algorithm. Thirdly, the noise IMF components can be discarded directly, and then the mixed IMF components can be denoised by wavelet threshold to obtain the noiseless IMF components; in addition, the useful IMF components need to be retained. Finally, the final denoising signal can be obtained by reconstructing the IMF components which have been denoised by the wavelet threshold and the useful IMF components retained before denoising. The experimental results prove that the combined denoising algorithm combines the merits of VMD, PE, and wavelet threshold, and this new algorithm has a good performance in the calibration denoising of accelerometer. Compared with the serious signal distortion caused by using only EMD or wavelet threshold, this method not only has a good denoising effect (the noises in the static part are eliminated by 99.97% and the SNR of the dynamic part is raised to 18.56) but also can maintain a good signal fidelity (the error of shock peak amplitude is 3.4%, the error of vibration peak amplitude is 0.4%, and the correlation coefficient between the denoising signals and dynamic part is as high as 0.982). [ABSTRACT FROM AUTHOR]

In recent years, High-G MEMS accelerometers have been widely used in aviation, medicine, and other fields. So it is extremely important to improve the accuracy and performance of High-G MEMS accelerometers. For this purpose, we propose a fusion algorithm that combines EMD, wavelet thresholding, and temperature compensation to process measurement data from a High-G MEMS accelerometer. In the fusion algorithm, the original accelerometer signal is first decomposed by EMD to obtain the intrinsic mode function (IMF). Then, sample entropy (SE) is used to divide the IMF components into three segments. The noise segment is directly omitted, wavelet thresholding is performed on the mixing segment, and a GA-BP performs temperature compensation on the drift segment. Finally, signal reconstruction is implemented. Later, a comparative analysis is carried out on the results from four models: EMD, wavelet thresholding, EMD + wavelet thresholding, and EMD + wavelet thresholding + temperature compensation. The experimental data show that the acceleration random walk change from 1712.66 g/h/Hz0.5 to 79.15 g/h/Hz0.5 and the zero-deviation stability change from 49275 g/h to 774.7 g/h. This indicates that the fusion algorithm (EMD + wavelet thresholding + temperature compensation) not only effectively suppresses the noise of high-frequency components but also compensates for temperature drift in the accelerometer. [ABSTRACT FROM AUTHOR]

This paper proposed three methods to compensate the temperature energy influence drift of the MEMS vibration gyroscope, including radial basis function neural network (RBF NN), RBF NN based on genetic algorithm (GA), and RBF NN based on GA with Kalman filter (KF). Three-axis MEMS vibration gyroscope (Gyro X, Gyro Y, and Gyro Z) output data are compensated and analyzed in this paper. The experimental results proved the correctness of these three methods, and MEMS vibration gyroscope temperature energy influence drift is compensated effectively. The results indicate that, after RBF NN-GA-KF method compensation, the bias instability of Gyros X, Y, and Z improves from 139°/h, 154°/h, and 178°/h to 2.9°/h, 3.9°/h, and 1.6°/h, respectively. And the angle random walk of Gyros X, Y, and Z was improved from 3.03°/h1/2, 4.55°/h1/2, and 5.89°/h1/2 to 1.58°/h1/2, 2.58°/h1/2, and 0.71°/h1/2, respectively, and the drift trend and noise characteristic are optimized obviously. [ABSTRACT FROM AUTHOR]