Search

Due to the complexity of the dynamic model of a planar 3-RRR flexible parallel manipulator (FPM), it is often difficult to achieve active vibration control algorithm based on the system dynamic model. To establish a simple and efficient dynamic model of the planar 3-RRR FPM to study its dynamic characteristics and build a controller conveniently, firstly, considering the effect of rigid-flexible coupling and the moment of inertia at the end of the flexible intermediate link, the modal function is determined with the pinned-free boundary condition. Then, considering the main vibration modes of the system, a high-efficiency coupling dynamic model is established on the basis of guaranteeing the model control accuracy. According to the model, the modal characteristics of the flexible intermediate link are analyzed and compared with the modal test results. The results show that the model can effectively reflect the main vibration modes of the planar 3-RRR FPM; in addition the model can be used to analyze the effects of inertial and coupling forces on the dynamics model and the drive torque of the drive motor. Because this model is of the less dynamic parameters, it is convenient to carry out the control program.

This paper presents a novel quasi-zero-stiffness (QZS) isolator designed by combining a tension spring with a vertical linear spring. In order to improve the performance of low-frequency vibration isolation, geometric nonlinear damping is proposed and applied to a quasi-zero-stiffness (QZS) vibration isolator. Through the study of static characteristics first, the relationship between force displacement and stiffness displacement of the vibration isolation mechanism is established; it is concluded that the parameters of the mechanism have the characteristics of quasi-zero stiffness at the equilibrium position. The solutions of the QZS system are obtained based on the harmonic balance method (HBM). Then, the force transmissibility of the QZS vibration isolator is analyzed. And the results indicate that increasing the nonlinear damping can effectively suppress the transmissibility compared with the nonlinear damping system. Finally, this system is innovative for low-frequency vibration isolation of rehabilitation robots and other applications.

The piezoelectric actuators are used to investigate the active vibration control of flexible manipulators in this paper. Based on the assumed mode method, piezoelectric coupling model, and Hamilton’s principle, the dynamic equation of the single flexible manipulator (SFM) with surface bonded actuators is established. Then, a singular perturbation model consisted of a slow subsystem and a fast subsystem is formulated and used for designing the composite controller. The slow subsystem controller is designed by fuzzy sliding mode control method, and the linear quadratic regulator (LQR) optimal control method is used to design fast subsystem controller. Furthermore, the changing trends of natural frequencies along with the changes in the position of piezoelectric actuators are obtained through the ANSYS Workbench software, by which the optimal placement of actuators is determined. Finally, numerical simulations and experiments are presented. The results demonstrate that the method of optimal placement is feasible based on the maximal natural frequency, and the composite controller presented in this paper can not only realize the trajectory tracking of the SFM and has a good result on the vibration suppression.

This paper investigates the dynamic of a flexible robotic manipulator (FRM) which consists of rigid driving base, flexible links, and flexible joints. With considering the motion fluctuations caused by the coupling effect, such as the motor parameters and mechanism inertias, as harmonic disturbances, the system investigated in this paper remains a parametrically excited system. An elastic restraint model of the FRM with elastic joints (FRMEJ) is proposed, which considers the elastic properties of the connecting joints between the flexible arm and the driving base, as well as the harmonic disturbances aroused by the electromechanical coupling effect. As a consequence, the FRMEJ accordingly remains a flexible multibody system which conveys the effects of rigid-flexible couple and electromechanical couple. The Lagrangian function and Hamilton’s principle are used to establish the dynamic model of the FRMEJ. Based on the dynamic model proposed, the vibration power flow is introduced to show the vibration energy distribution. Numerical simulations are conducted to investigate the effect of the joint elasticities and the disturbance excitations, and the influences of the structure parameters and motion parameters on the vibration power flow are studied. The results obtained in this paper contribute to the structure design, motion optimization, and vibration control of FRMs.

Flexible manipulator generally can be modeled as a coupling system with a flexible beam and a rigid moving base. This paper investigates the vibration responses and power flow of a flexible manipulator with a moving base (FMMB). Considering the motion characteristics of the rigid base, the moving base is modeled to have a motion with disturbances, and the dynamic model of the FMMB is established. With the dynamic model, vibration responses of the FMMB for the rigid base having disturbance velocities and accelerations are specifically presented. Subsequently, to investigate the effect of the disturbances on the vibration energy distributions of the FMMB, power flow of the FMMB is exhibited. To verify the dynamic model, an ADAMS physical model of the FMMB is constructed. It reveals that the motion characteristics of the rigid base have a noticeable effect on the vibration responses and power flow of the FMMB and should be considered. The results are significant and contribute to the vibration control of flexible manipulators.