Search

The rate and amount of Al3+ released from re-solubilization of the Al-containing polymers and minerals due to the increase in proton activity in the soil solution in subtropical regions is scarce in the literature. The objective of the present study was to track the Al3+ reappearance following its neutralization during the switch from a conventional tillage system to a no-till (NT) system. For this purpose, we evaluated a long-term lime experiment under NT on a subtropical Ultisol. The treatments included varying lime rates, with different historic of lime reapplication. Soil samples were taken at the 0–5, 5–10, and 10–15 cm depth in 1988, 1994, 1995, 1996, 2001, 2003, 2006, 2012, and 2022. The re-solubilization of Al-containing soil polymers and minerals in the 0–15 cm soil layer proceeds slowly in the first 10 years; afterwards, the rate and amount of Al3+ released increased. However, regardless of the lime treatment, the soil never returns its natural acidic state, even after 34 years of the first liming operation. A decrease in the intensity of reappearance of exchangeable Al3+ in the soil profile is clearly observed, compared to the treatment without reapplication of surface lime. We have observed that it takes 7–9 years for 10% of the effective cation exchange capacity to be occupied by Al3+ if limestone is not reapplied on the soil surface; if underdoses are reapplied this level can be maintained for 13–15 years. Furthermore, if larger and more frequent lime doses are used, a low Al3+ saturation (<10%) can be maintained permanently. These findings emphasize the importance of an appropriate liming process at the start of NT, followed with surface limestone reapplication, to ensure a very low Al3+ saturation over a long period of time in the 0–15 cm soil layer. • Al re-solubilization in the 0–15 cm layer proceeds slowly in the first 10 years. • After that, the Al3+ released accelerates the acidification in a chain reaction. • Even 34 years after the first liming, the soil never recovered its natural acidity. • It takes 7–9 years to reach 10% of Al saturation when surface liming is not performed. • Findings reinforce the mandatory of an adequate liming process at the beginning of NT. [ABSTRACT FROM AUTHOR]