Search

PLATO (PLAnetary Transits and Oscillation of stars) is a medium-class space mission part of the ESA Cosmic vision program. Its goal is to find and study extrasolar planetary systems, emphasizing on planets located in habitable zone around solar-like stars. PLATO is equipped with 26 cameras, operating between 500 and 1000nm. The alignment of the focal plane assembly (FPA) with the optical assembly is a time consuming process, to be performed for each of the 26 cameras. An automatized method has been developed to fasten this process. The principle of the alignment is to illuminate the camera with a collimated beam and to vary the position of the FPA to search for the position which minimizes the RMS spot diameter. To reduce the total number of measurements which is performed, the alignment method is done by iteratively searching for the best focus, decreasing at each step the error on the estimated best focus by a factor 2. Because the spot size at focus is similar to the pixel, it would not be possible with this process alone to reach an alignment accuracy of less than several tens of microns. Dithering, achieved by in-plane translation of the focal plane and image recombination, is thus used to increase the sampling of the spot and decrease the error on the merit function.

Measurements in the infrared wavelength domain allow us to assess directly the physical state and energy balance of cool matter in space, thus enabling the detailed study of the various processes that govern the formation and early evolution of stars and planetary systems in the Milky Way and of galaxies over cosmic time. Previous infrared missions, from IRAS to Herschel, have revealed a great deal about the obscured Universe, but sensitivity has been limited because up to now it has not been possible to fly a telescope that is both large and cold. Such a facility is essential to address key astrophysical questions, especially concerning galaxy evolution and the development of planetary systems. SPICA is a mission concept aimed at taking the next step in mid- and far-infrared observational capability by combining a large and cold telescope with instruments employing state-of-the-art ultra-sensitive detectors. The mission concept foresees a 2.5-meter diameter telescope cooled to below 8 K. Rather than using liquid cryogen, a combination of passive cooling and mechanical coolers will be used to cool both the telescope and the instruments. With cooling not dependent on a limited cryogen supply, the mission lifetime can extend significantly beyond the required three years. The combination of low telescope background and instruments with state-of-the-art detectors means that SPICA can provide a huge advance on the capabilities of previous missions. The SPICA instrument complement offers spectral resolving power ranging from ~50 through 11000 in the 17-230 µm domain as well as ~28.000 spectroscopy between 12 and 18 µm. Additionally, SPICA will be capable of efficient 30-37 µm broad band mapping, and small field spectroscopic and polarimetric imaging in the 100-350 µm range. SPICA will enable far infrared spectroscopy with an unprecedented sensitivity of ~5x10-20 W/m2 (5σ/1hr) - at least two orders of magnitude improvement over what has been attained to date. With this exceptional leap in performance, new domains in infrared astronomy will become accessible, allowing us, for example, to unravel definitively galaxy evolution and metal production over cosmic time, to study dust formation and evolution from very early epochs onwards, and to trace the formation history of planetary systems.

The Mid-Infrared Instrument (MIRI) on-board the James Webb Space Telescope (JWST) performs medium resolution spectroscopy in the 5 to 28.5micron wavelength range. The Medium-Resolution Spectrometer (MRS) of MIRI uses two Si:As impurity band conduction detector arrays. Coherent reflection of infrared light within the MIRI MRS detectors results in fringing; the detector layers act as efficient Fabry-Perot etalons. In this paper we present three methods to calibrate out the fringes, as part of the MIRI data reduction pipeline. The methods are presented in the context of the investigations on the fringing seen in the MIRI flight model ground test data. The investigations show that the detector fringe transmission depends on the illumination pattern of the observed source on the detector. Optical stimuli of different spatial extents and position in the field-of-view yield different fringe patterns in their extracted spectra. An optical model of the MIRI detectors is hence proposed. By solving the Fresnel equations across the model optical layers, a source-specific fringe correction is derived.

The Mid-Infrared Instrument (MIRI) on-board the James Webb Space Telescope (JWST) performs mediumresolution spectroscopy in the 5 to 28.5micron wavelength range. In this paper two algorithms are presented that will be used to extract 1D spectra from the 2D absolutely calibrated detector science frames acquired with the Medium-Resolution Spectrometer (MRS) of MIRI. The first spectral extraction algorithm performs standard aperture photometry on point and extended sources. The second algorithm, applicable only to point sources, uses the instrument point spread function (PSF) and the pixel signal variance as a weighting function, to extract the signal from the detector pixels in an optimized way. This "optimal" extraction is also optimal in the case of faint source observations. The two algorithms are tested on MIRI ground test data and compared. For point sources, the optimal extraction algorithm is found to be more reliable than the aperture extraction algorithm.

© COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only. CubeSat technology is evolving rapidly. With the increased performance of these small spacecraft platforms, astronomical missions on CubeSats will be flown in the near future. These types of missions have very demanding requirements in terms of spacecraft pointing. At the KU Leuven university, we have developed a compact, highaccuracy attitude determination and control system for CubeSats. The system uses three reaction wheels and a star tracker to deliver high agility and accuracy. In this paper, we will discuss the test and calibration campaign that was carried out. This campaign was instrumental in achieving the performance required by astronomical missions. ispartof: SPACE TELESCOPES AND INSTRUMENTATION 2018: OPTICAL, INFRARED, AND MILLIMETER WAVE vol:10698 ispartof: Conference on Space Telescopes and Instrumentation - Optical, Infrared, and Millimeter Wave location:Austin, TX date:10 Jun - 15 Jun 2018 status: published