Search

5-Chloro-4-methyl-2-hydroxybenzophenone S-propyl-4-phenyl-thiosemicarbazone (H2L) and its cis-dioxomolybdenum(VI) complexes, in the general formula [MoO2(L)R-OH)] (R: methyl, 1; ethyl, 2; n-propyl, 3; n-butyl, 4; n-pentyl, 5), were synthesized and characterized by micro analysis, electronic, infrared and (1)H and (13)C NMR spectra. The crystal structures of complexes, 1 and 3, have been solved by direct methods (SIR92) and refined to the residual indexes R1=0.098 and R1=0.052 respectively. Complexes 1 and 3 are crystallized in the triclinic space group P-1 with Z=2. The crystal study of complex 1 showed the first example of intermolecular hydrogen bond for this type of molybdenum-thiosemicarbazone complexes. The hydrogen bond is between the hydroxyl proton of attached alcohol and an oxo oxygen (in MoO2(2+) unit) of another complex molecule, and its bond distance (1.767(1)Å) is shorter than from the σ-coordination bonds in complex 1. Antioxidant activities of the compounds were determined by using 1,1-diphenyl-2-picrylhydrazyl (DPPH) method. Ligand showed 23.61% DPPH radical scavenging activity at 250 mg/L concentration. Cupric Reducing Antioxidant Capacity (CUPRAC) was also evaluated and trolox-equivalent antioxidant capacity (TEAC) values were found for ligand, 1 and 3 as 0.51, 0.33 and 0.30 respectively., (Copyright © 2015 Elsevier B.V. All rights reserved.)

CdO-ZnO nanocomposite was prepared by microwave-assisted method and characterized by X-ray crystallography (XRD), Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FT-IR). It exhibits hexagonal cubic structure with an average crystallite size of 27 nm. From the UV-Vis spectra, the bandgap is estimated as 2.92 eV. The fluorescence spectrum shows a near band edge emission at 422 nm. In addition the antibacterial activity of CdO-ZnO nanocomposite was carried out in-vitro against two kinds of bacteria: gram negative bacteria (G -ve) i.e. Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae and gram positive bacteria (G +ve): Staphylococcus aureus, Proteus vulgaris and Bacillus spp. This study indicates the zone of inhibition of 40 mm has high antibacterial activity towards the gram positive bacterium S. aureus., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In the present study, synthesized pure and Ag (1%, 2%, and 3%) doped Cadmium Oxide (CdO) nanoparticles by chemical precipitation method. Then, the synthesized products were characterized by thermo gravimetric-differential thermal analysis (TG-DTA), X-ray diffraction (XRD) analysis, Fourier transform infrared (FT-IR) spectroscopy, Ultra violet-Vis diffused reflectance spectroscopy (UV-Vis-DRS), Scanning electron microscopy (SEM), Energy dispersive X-rays (EDX) spectroscopy, and anti-bacterial activities, respectively. The transition temperatures and phase transitions of Cd(OH)2 to CdO at 400°C was confirmed by TG-DTA analysis. The XRD patterns show the cubic shape and average particle sizes are 21, 40, 34, and 37nm, respectively for pure and Ag doped samples. FT-IR study confirmed the presence of CdO and Ag at 677 and 459cm(-1), respectively. UV-Vis-DRS study shows the variation on direct and indirect band gaps. The surface morphologies and elemental analysis have been confirmed from SEM and with EDX. In addition, the synthesized products have been characterized by antibacterial activities against Gram-positive and negative bacteria. Further, the present investigation suggests that CdO nanoparticles have the great potential applications on various industrial and medical fields of research., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Four dioxomolybdenum(VI) complexes were synthesized by reacting [MoO2(acac)2] with N-ethyl-2-(5-bromo-2-hydroxybenzylidene) hydrazinecarbothioamide (1), N-ethyl-2-(5-allyl-3-methoxy-2-hydroxybenzylidene) hydrazinecarbothioamide (2), N-methyl-2-(3-tert-butyl-2-hydroxybenzylidene) hydrazinecarbothioamide (3), and N-ethyl-2-(3-methyl-2-hydroxybenzylidene) hydrazinecarbothioamide (4). The molecular structures of 1, 2, and all the synthesized complexes were determined using single crystal X-ray crystallography. The binding properties of the ligand and complexes with calf thymus DNA (CT-DNA) were investigated via UV, fluorescence titrations, and viscosity measurement. Gel electrophoresis revealed that all the complexes cleave pBR 322 plasmid DNA. The cytotoxicity of the complexes were studied against the HCT 116 human colorectal cell line. All the complexes exhibited more pronounced activity than the standard reference drug 5-fluorouracil (IC50 7.3μM). These studies show that dioxomolybdenum(VI) complexes could be potentially useful in chemotherapy., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Herein, we report the in situ polymerization of 1,5-diaminonaphthalene (15DAN) and 1,4-diaminoanthraquinone (14DAA) on the surface of reduced graphite oxide (RGO). Synthesized RGO-P15DAN and RGO-P14DAA were characterized by FTIR, Raman, SEM, TGA and XRD. The adsorption capacity and adsorptivity of the synthesized composites were investigated by Atomic Absorption Spectroscopy (AAS) using 100 ppm aqueous solution of Pb(2+) ions. Further, we compared the results of the composites with those of poly 1,5-(diaminonaphthalene) (P15DAN), poly 1,4-(diaminoanthraquinone) (P14DAA), RGO, graphite oxide (GO) and graphite. Among the tested adsorbents, RGO-P15DAN demonstrated the high adsorptivity., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Luminescence properties of Pr(3+) activated Sr1.5Ca0.5SiO4 phosphors synthesized by solid state reaction method are reported in this work. Blue, orange red and red emissions were observed in the Pr(3+) doped sample under 444nm excitation and these emissions are assigned as (3)P0→(3)H4, (3)P0→(3)H6 and (3)P0→(3)F4 transitions. The emission intensity shows a maximum corresponding to the 0.5wt% Pr(3+) ion. The decay analysis was done for 0.05 and 0.5wt% Pr(3+) doped samples for the transition (3)P0→(3)H6. The life times of 0.05 and 0.5wt% Pr(3+) doped samples were calculated by fitting to exponential and non-exponential curve respectively, and are found to be 156 and 105μs respectively. The non-exponential behaviour arises due to the statistical distribution of the distances between the ground state Pr(3+) ions and excited state Pr(3+) ions, which cause the inhomogeneous energy transfer rate. The XRD spectrum confirmed the triclinic phase of the prepared phosphors. The compositions of the samples were determined by the energy dispersive X-ray spectra. From the SEM images it is observed that the particles are agglomerated and are irregularly shaped. IR absorption bands were assigned to different vibrational modes. The well resolved peaks shown in the absorption spectra are identical to the excitation spectra of the phosphor samples. Pr(3+) activated Sr1.5Ca0.5SiO4 phosphors can be efficiently excited with 444nm irradiation and emit multicolour visible emissions. From the CIE diagram it can be seen that the prepared phosphor samples give yellowish-green emission., (Copyright © 2014 Elsevier B.V. All rights reserved.)

New cis-dioxomolybdenum(VI) and oxovanadium(IV) complexes of the Schiff base, derived from S-methyl dithiocarbazate and 2,3-dihydroxybenzaldehyde (H2dhsm), have been synthesized. The complexes of the type cis-[MoO2(dhsm)] (1a), cis-[MoO2(dhsm)(D)] (1b-1d) [D=neutral monodentate ligand; EtOH, pyridine (py) or imidazole (imz)], [VO(dhsm)(NN)] (2a, 2b) [NN=2,2'-bipyridine (bipy) or 1,10-phenanthroline (phen)] and [VO(dhsm)] (2c) have been isolated, characterized by (1)H NMR, IR, UV-Vis and EPR spectral studies and investigated by cyclic voltammetry. The X-ray crystal structure of cis-[MoO2(dhsm)(EtOH)] (1b) has been determined and shows that the complex has a distorted octahedral geometry in which the H2dhsm behaves as a dianionic ONS tridentate ligand coordinating via phenoxide oxygen, hydrazinic nitrogen and thiolate sulfur. The oxomolybdenum(IV) complex [MoO(dhsm)] (1e) has obtained from dioxomolybdenum(VI) complex (1b) by oxo abstraction with PPh3. The reactivity of the complexes toward catalytic oxidation of alcohols in the presence of H2O2 and t-BuOOH as co-oxidants under solvent free conditions is reported., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A simple and inexpensive combustion method was used to prepare Fe(3+) doped YAlO3 perovskite within few minutes at low temperature (400±10°C). This might be useful in lowering the cost of the material. The final products were well characterized by various spectroscopic techniques such as PXRD, SEM, TEM, FTIR and UV-Visible. The average crystallite size was estimated from the broadening of the PXRD peaks and found to be in the range 45-90nm, the results were in good agreement with the W-H plots and TEM. The crystallites show dumbbell shape, agglomerated particles with different size. The TL glow curves of 1-5kGy γ-irradiated YAlO3:Fe(3+) (0.1mol%) nanopowder warmed at a heating rate of 3°Cs(-1) records a single glow peak at ∼260°C. The kinetic parameters namely activation energy (E), order of kinetics (b) and frequency factor (s) were determined at different gamma doses using the Chens glow peak shape method and the results were discussed in detail. The photoluminescence spectra for Fe(3+) (0.1-0.9mol%) doped YAlO3 records the lower energy band at 720nm ((4)T1 (4G)→(6)A1 (6S)) and the intermediate band located at 620nm ((4)T2 ((4)G)→(6)A1 (6S)) with the excitation of 378nm. The higher energy band located at 514nm was associated to (4)E+(4)A1 ((4)G)→(6)A1 (6S) transition. The resonance signals at g values 7.6, 4.97, 4.10, 2.94, 2.33 and 1.98 were observed in EPR spectra of Fe(3+) (0.1-0.9mol%) doped YAlO3 recorded at room temperature. The g values indicate that the iron ions were in trivalent state and distorted octahedral site symmetry was observed., (Copyright © 2014 Elsevier B.V. All rights reserved.)

This research is mainly focusing on one-step biosynthesis of graphene from graphene oxide and its stabilization using naturally occurring milk protein, casein. The synthesis of casein reduced graphene oxide (CRGO) was completed within 7h under reflux at 90°C with the formation of few layered fine graphene nanosheets. UV-Vis, XRD, XPS analysis data revealed the reduction process of the graphene oxide. Results of FT-IR, HPLC and TEM analysis have shown that the ensuing material consists of graphene decorated with casein molecules. Aspartic acid and glutamic acid residue present in casein molecules are responsible for the reduction of graphene oxide., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Dosimetric properties of γ-irradiated ZnAl2O4:Ce(3+) (1-9 mol%) nanophosphors were studied and reported for the first time. The phosphor prepared by solution combustion route was well characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. PXRD patterns of calcined phosphor show pure cubic phase of ZnAl2O4:Ce(3+). Flake type morphology was observed from SEM studies. The particle size estimated by Scherrer's and Williamson Hall (W-H) plots and found to be in the range 11-17 nm. From photoluminescence (PL) studies two characteristic emission peaks at 363 and 480 nm were observed due to 5d-4f transitions of Ce(3+) ions. The thermoluminescence (TL) glow curves of ZnAl2O4:Ce(3+) (1-9 mol%) nanophosphor recorded two glow peaks 145 and 215 °C at a warming rate of 2.5 °C s(-1). The optimized TL intensity was observed for ∼5 mol% Ce(3+) concentration. The two TL glow peaks in the γ-irradiated (0.1-6 kGy) ZnAl2O4:Ce(3+) (5 mol%) nanophosphor indicates that two set of traps were activated within the temperature range 145 and 215 °C. The kinetic parameters (E,b,s) associated with the prominent glow peaks were estimated using Chen's glow peak shape method. The intensity of the TL glow peak (145 °C) increases linearly with increase of γ-dose upto 1 kGy above which it follows sub-linear behavior. Track interaction model (TIM) was used to explain the linearity/sub linearity/saturation behavior of TL intensity. The TL glow curves show simple glow peak structure, good reusability, low fading and wide range of linearity. Hence, the optimized ZnAl2O4:Ce(3+) (5 mol%) nanophosphor was quite useful for radiation dosimetry and display applications., (Copyright © 2013 Elsevier B.V. All rights reserved.)

A divanadium(V) complex, [V2O3(o-van-val)2] (o-van-val=Schiff base derived from o-vanillin and L-valine), has been synthesized and structurally characterized. The crystal structure shows that both of the vanadium centers in the complex have a distorted octahedral coordination environment composed of tridentate Schiff base ligand. A V2O3 core in molecular structure adopts intermediate between cis and trans configuration with the O1V1⋯V1AO1A torsion angle 115.22 (28)° and the V1⋯V1A distance 3.455Å. The binding properties of the complex with calf thymus DNA (CT-DNA) have been investigated by UV-vis absorption, fluorescence, CD spectra and viscosity measurement. The results indicate that the complex binds to CT-DNA in non-classical intercalative mode. Meanwhile, the interaction of the complex with bovine serum albumin (BSA) has been studied by UV-vis absorption, fluorescence and CD spectra. Results indicated that the complex can markedly quench the intrinsic fluorescence of BSA via a static quenching process, and cause its conformational change. The calculated apparent binding constant Kb was 1.05×10(6)M(-1) and the binding site number n was 1.18., (Copyright © 2013 Elsevier B.V. All rights reserved.)

A new route has been devised, leading to the production of VOX3 molecules where X=F, Br and I by an on-line process using vanadium oxytrichloride, VOCl3 as a starting compound passed over the following heated salts NaF, KBr and KI at 375, 700 and 550 degrees C, respectively. The products have been characterized by the IR spectra of their vapors. The low resolution gas phase on-line Fourier transform infrared spectra reported for the first time show strong bands with PQR type structure, centered at 1058, 1035, 1030 and 1025 cm(-1) assigned to the v1(a1), the O=V stretching fundamental mode of VOF3, VOCl3 VOBr3 and VOI3, respectively.

Antimony oxide trihalides, SbOX3 molecules, where X = F or Cl have been produced, by means of an on-line process, using antimony trichloride, SbOCl3 as starting material passed over heated silver oxide at 230 degrees C. The antimony oxide trichloride SbOCl3 formed is then reacted with sodium fluoride, NaF at 550 degrees C to produce antimony oxide trifluoride, SbOF3. The products have been characterized by the IR spectra of their vapors. Low resolution gas-phase Fourier transform infrared spectra show strong bands centered at 1272 and 1217 cm(-1), assigned to nu1(a1), the O=Sb stretching fundamental of SbOF3 and SbOCl3, respectively. Both observed bands show typical PQR-type structure with a strong Q-head.