Search

STUDY DESIGN.: In a human cadaveric burst fracture model, the amount of endplate fracture reduction after posterior instrumentation and balloon vertebroplasty was investigated quantitatively.OBJECTIVES.: To assess, in a burst fracture model, the vertebral body and adjacent disc heights, in parallel sagittal planes with 3-dimensional (3D) rotational x-ray imaging, at various phases during pedicle screw fixation and subsequent balloon vertebroplasty.SUMMARY OF BACKGROUND DATA.: In recent human cadaveric thoracolumbar fracture studies, it was found that vertebral body height could be restored significantly with inflatable bone tamps. However, limited quantitative data exist on the amount of fracture reduction that can be achieved and how much of the reduction will be lost after deflation and removal of the bone tamps before the cement is injected.METHODS.: Twenty burst fractures were created and balloon vertebroplasty with calcium phosphate cement was performed after pedicle screw instrumentation. A 3D dataset was obtained during the following phases: intact, fractured, after reduction and stabilization with pedicle screws, after inflation of the balloons, after deflation and removal of the balloons, after injection of the cement. The fractured vertebral body and adjacent disc heights were measured from five reconstructed sagittal images and compared for the six phases of the procedure. Furthermore, the difference between the vertebral body height centrally and peripherally was calculated.RESULTS.: The mean vertebral body height at the thoracic level was Tintact = 19.5 ± 2.2 mm, Tfractured = 14.6 ± 3.8 mm, Treduction = 17.3 ± 2.2 mm, Tinflation = 20.1 ± 2.0 mm, Tdeflation = 18.0 ± 2.0 mm, and Tcement = 17.8 ± 1.8 mm. The overall change in vertebral body height between these phases was significant (P < 0.001). At the lumbar level the mean vertebral body height was Tintact = 23.2 ± 3.8 mm, Tfractured = 14.7 ± 3.0 mm, Treduction = 18.4 ± 2.5 mm, Tinflation = 23.2 ± 3.5 mm, Tdeflation = 19.3 ± 2.3 mm, and Tcement = 20.2 ± 2.8 mm. The overall change in MCVBH between these phases was also significant (P < 0.001). The increase in vertebral body height resulted in a decrease of the adjacent disc height. No difference was found for the amount of endplate reduction in the center or at the periphery. No leakage of cement was detected in the spinal canal.CONCLUSIONS.: Reduction of endplate fractures, both in the center and at the periphery, seems feasible and safe with combined fracture reduction and balloon vertebroplasty. The endplate fracture reduction that was gained by inflation of the bone tamps could not be maintained after deflation. [ABSTRACT FROM AUTHOR]

STUDY DESIGN.: In a human cadaveric burst fracture model with and without longitudinal ligament damage, the amount of anterior and posterior bone displacement (ABD, PBD) during balloon vertebroplasty after pedicle-screw instrumentation was investigated quantitatively.OBJECTIVES.: To investigate, in a burst fracture model with and without longitudinal ligament damage, the amount of ABD, PBD, and cement leakage at various phases during balloon vertebroplasty in combination with pedicle-screw instrumentation.SUMMARY OF BACKGROUND DATA.: The role of intact longitudinal ligaments in traumatic spine fractures, for prevention of bone retropulsion and subsequent reduction, has been discussed in several studies but is still up for debate. In a recent human cadaveric burst fracture study, inflatable bone tamps and calcium phosphate cement were used for the augmentation of the anterior column after pedicle-screw instrumentation. The additional balloon vertebroplasty procedure was found to be feasible and safe, but no data pertaining to unwarranted bone displacement or cement leakage during the procedure are available for burst fractures with damaged longitudinal ligaments.METHODS.: Ten thoracic and 10 lumbar burst fractures, with rotation or flexion components, were created, and balloon vertebroplasty with calcium phosphate cement was performed after pedicle-screw instrumentation. Volumetric datasets (using the 3-dimensional (3D) rotational x-ray imaging technique) of the fractures were obtained during the following phases: intact, fractured, after reduction and stabilization with pedicle-screws, after inflation of the balloons, after deflation and removal of the balloons, and after injection of the cement. The amount of ABD and PBD was measured on reconstructed sagittal images and recorded together with the presence of extracorporal cement leakage. The continuity of the longitudinal ligaments was assessed after anatomic dissection.RESULTS.: During the balloon vertebroplasty procedure, a significant (P < 0.05) increase of ABD (at both thoracic and lumbar level) and PBD (thoracic level) occurred after inflation of the balloons. After deflation and subsequent injection of the cement, however, the ABD and PBD returned to the preinflation levels. The absolute amount of ABD and PBD (<1 mm) during inflation was considered of little clinical importance. No differences in ABD or PBD were observed for specimens with or without continuity of the corresponding longitudinal ligament, irrespective of the level, at any of the phases during the experiment (P > 0.5 in all cases). A small amount of cement leakage was observed in the psoas compartment of one specimen with intact longitudinal ligaments.CONCLUSIONS.: It is suggested that balloon vertebroplasty after pedicle-screw instrumentation may safely be used, in terms of bone displacement and cement leakage, in fracture types where damage to longitudinal ligaments is to be expected. [ABSTRACT FROM AUTHOR]

STUDY DESIGN.: A validation study was done in which reconstructed three-dimensional rotational x-ray images were quantitatively compared with corresponding anatomic sections.OBJECTIVES.: To assess the accuracy of reconstructed images acquired on a three-dimensional rotational x-ray imaging device.SUMMARY OF BACKGROUND DATA.: Minimally invasive procedures have proven quite successful as alternatives for a multitude of open treatments. An unfavorable property of this type of procedure is a lack of direct vision of the operating area. Three-dimensional rotational x-ray imaging may be able to merge the advantages of computed tomography and fluoroscopy: real-time two-dimensional projections for fast visual feedback and three-dimensional reconstructions for detailed volumetric imaging of complex anatomy.METHODS.: Twenty traumatic thoracolumbar burst fractures were created and underwent pedicle screw instrumentation and balloon vertebroplasty. Subsequently, a three-dimensional dataset was obtained, and the midsagittal image was reconstructed. The specimens were sliced, and photographs were obtained. Multiple parameters on the reconstructed images and photographs were measured two times by two observers using a graphical method. The differences and standard deviations were calculated for the corresponding parameters and for the intraobserver data.RESULTS.: The mean difference between the corresponding values ranged between −1.1 and 2.1 mm for all parameters. The standard deviation for the differences per parameter ranged between 1.2 and 3.2 mm. The intraobserver differences ranged from −0.8 to 1.4 mm, and the standard deviation varied between 0.4 and 2.4 mm.CONCLUSIONS.: The reconstructed midsagittal images were accurate in all measured parameters. The three-dimensional rotational x-ray technique may prove to be valuable for less invasive spine surgery. [ABSTRACT FROM AUTHOR]

STUDY DESIGN.: Clinical trial (phase II). OBJECTIVES.: To assess the feasibility and safety of balloon vertebroplasty after posterior short-segment reduction and fixation for the treatment of traumatic burst fractures. SUMMARY OF BACKGROUND DATA.: Hardware failure and loss of reduction after posterior short-segment instrumentation are complications caused by insufficiency of anterior column support. This is due to migration of disc tissue through the endplate into the fractured vertebral body that cannot be restored with posterior instrumentation. METHODS.: Patients with traumatic thoracolumbar burst fractures without neurologic deficits were included. After posterior reduction and fixation, bilateral transpedicular balloon reduction of the endplate was performed, and calcium phosphate cement was injected. Preoperative and postoperative Cobb angle and central and anterior height were assessed with radiographs and MRI. RESULTS.: Twenty patients underwent surgery without technical difficulties, and a substantial reduction of the endplates could be achieved with the technique. All patients recovered uneventfully, and the neurologic examination revealed no deficits. The postoperative radiographs and magnetic resonance images demonstrated a good fracture reduction and filling of the bone defect without unwarranted bone displacement. The central and anterior height of the vertebral body could be restored to 78 and 91% of the estimated intact height, respectively. Complications were cement leakage in five cases without clinical implications and one wound hematoma. CONCLUSIONS.: Transpedicular balloon vertebroplasty for the direct restoration of burst fractures seems feasible in combination with posterior instrumentation. Cement leakage occurred but had no clinical consequences. [ABSTRACT FROM AUTHOR]