Search

The purpose of this study was to investigate the relationship between the cable force and linear hammer speed in the hammer throw and to identify how the magnitude and direction of the cable force affects the fluctuations in linear hammer speed. Five male (height: 1.88 ± 0.06 m; body mass: 106.23 ± 4.83 kg) and five female (height: 1.69 ± 0.05 m; body mass: 101.60 ± 20.92 kg) throwers participated and were required to perform 10 throws each. The hammer's linear velocity and the cable force and its tangential component were calculated via hammer head positional data. As expected, a strong correlation was observed between decreases in the linear hammer speed and decreases in the cable force (normalised for hammer weight). A strong correlation was also found to exist between the angle by which the cable force lags the radius of rotation at its maximum (when tangential force is at its most negative) and the size of the decreases in hammer speed. These findings indicate that the most effective way to minimise the effect of the negative tangential force is to reduce the size of the lag angle. [ABSTRACT FROM AUTHOR]

This study characterizes key elements of the start in elite female World Cup skeleton athletes. The top 20 female competitors in three World Cup races were videotaped within a calibrated space to allow the following components of the start to be quantified: (1) acceleration (velocity at 15-m mark, time to 15-m mark), (2) capacity (time to load, total number of steps to load), and (3) load (velocity at 45-m mark). A correlation analysis was used to establish the relationship between the variables of interest and overall start time (15- to 65-m mark). Velocity at the 15-m mark accounted for 86% of the variance in overall start time at St. Moritz and 85% at Sigulda. A stepwise regression analysis revealed that approximately 89% of the variation in start time could be explained by velocity at the 15-m mark, time to load, and velocity at the 45-m mark. Of the variables analysed in this study, rapid acceleration to attain a high velocity at the 15-m mark was the most important component of a fast overall start time. The importance of the time to load and velocity at the 45-m mark vary according to the different track characteristics. [ABSTRACT FROM AUTHOR]

The development of cable force during hammer-throw turns is crucial to the throw distance. In this paper, we present a method that is capable of measuring cable force in real time and, as it does not interfere with technique, it is capable of providing immediate feedback to coaches and athletes during training. A strain gauge was mounted on the wires of three hammers to measure the tension in the wire and an elite male hammer thrower executed three throws with each hammer. The output from the gauges was recorded by a data logger positioned on the lower back of the thrower. The throws were captured by three high-speed video cameras and the three-dimensional position of the hammer's head was determined by digitizing the images manually. The five best throws were analysed. The force acting on the hammer's head was calculated from Newton's second law of motion and this was compared with the force measured via the strain gauge. Qualitatively the time dependence of the two forces was essentially the same, although the measured force showed more detail in the troughs of the force-time curves. Quantitatively the average difference between the measured and calculated forces over the five throws was 76 N, which corresponds to a difference of 3.8% for a cable force of 2000 N. [ABSTRACT FROM AUTHOR]