Search

Two main metrics are usually employed to assess the quality of medical ultrasound (US) images, namely the contrast and the spatial resolution. A number of imaging algorithms have been proposed to improve one of those metrics, often at the expense of the other one. This paper presents the application of a correlation-based ultrasound imaging method, called Excitelet , to medical US imaging applications and the inclusion of a new Phase Coherence (PC) metric within its formalism. The main idea behind this algorithm, originally developed and validated for Non-Destructive Testing (NDT) applications, is to correlate a reference signal database with the measured signals acquired from a transducer array. In this paper, it is shown that improved lateral resolutions and a reduction of imaging artifacts are obtained over the Synthetic Aperture Focusing Technique (SAFT) when using Excitelet in conjunction with a PC filter. This novel method shows potential for the imaging of specular reflectors, such as invasive surgical tools. Numerical and experimental results presented in this paper demonstrate the benefit, in terms of contrast and resolution, of using the Excitelet method combined with PC for the imaging of strong reflectors. • A new phase coherence filter is presented for improved contrasts. • The correlation-based algorithm Excitelet is applied to ultrasound medical imaging. • Excitelet outperforms the synthetic aperture method in terms of resolutions. • The correlation-based method is efficient for the imaging of surgical tools. [ABSTRACT FROM AUTHOR]

Abstract: The paper presents the modified multi-element synthetic transmit aperture (MSTA) method for ultrasound imaging. It is based on coherent summation of RF echo signals with apodization weights taking into account the finite size of the transmit subaperture and of the receive element. The work presents extension of the previous study where the modified synthetic transmit aperture (STA) method was considered and verified [1]. In the case of MSTA algorithm the apodization weights were calculated for each imaging point and all combinations of the transmit subaperture and receive element using their angular directivity functions (ADFs). The ADFs were obtained from the exact solution of the corresponding mixed boundary-value problem for periodic baffle system modeling the transducer array. Performance of the developed method was tested using Field II simulated synthetic aperture data of point reflectors for 4MHz 128-element transducer array with 0.3mm pitch and 0.02mm kerf to estimate the visualization depth and lateral resolution. Also experimentally determined data of the tissue-mimicking phantom (Dansk Fantom Service, model 571) obtained using 128 elements, 4MHz, linear transducer array (model L14-5/38) and Ultrasonix SonixTOUCH Research platform were used for qualitative assessment of imaging contrast improvement. Comparison of the results obtained by the modified and conventional MSTA algorithms indicated 15dB improvement of the noise reduction in the vicinity of transducer’s surface (1mm depth), and concurrent increase in the visualization depth (86% augment of the scattered amplitude at the depth of 90mm). However, this increase was achieved at the expense of minor degradation of the lateral resolution of approximately 8% at the depth of 50mm and 5% at the depth of 90mm. [Copyright &y& Elsevier]

Abstract: The modified synthetic transmit aperture (STA) algorithm is described. The primary goal of this work was to assess the possibility to improve the image quality achievable using synthetic aperture (SA) approach and to evaluate the performance and the clinical applicability of the modified algorithm using phantoms. The modified algorithm is based on the coherent summation of back-scattered RF echo signals with weights calculated for each point in the image and for all possible combinations of the transmit–receive pairs. The weights are calculated using the angular directivity functions of the transmit–receive elements, which are approximated by a far-field radiation pattern of a narrow strip transducer element vibrating with uniform pressure amplitude over its width. In this way, the algorithm takes into account the finite aperture of each individual element in the imaging transducer array. The performance of the approach developed was tested using FIELD II simulated synthetic aperture data of the point reflectors, which allowed the visualization (penetration) depth and lateral resolution to be estimated. Also, both simulated and measured data of cyst phantom were used for qualitative assessment of the imaging contrast improvement. The experimental data were obtained using 128 elements, 4MHz, linear transducer array of the Ultrasonix research platform. The comparison of the results obtained using the modified and conventional (unweighted) STA algorithms revealed that the modified STA exhibited an increase in the penetration depth accompanied by a minor, yet discernible upon the closer examination, degradation in lateral resolution, mainly in the proximity of the transducer aperture. Overall, however, a considerable (12dB) improvement in the image quality, particularly in the immediate vicinity of the transducer’s surface was demonstrated. The modified STA method holds promise to be of clinical importance, especially in the applications where the quality of the “near-field” image, that is the image in the immediate vicinity of the scanhead is of critical importance such as for instance in skin- and breast-examinations. [Copyright &y& Elsevier]

With sheet metal hydroforming, a sheet metal is formed by a liquid medium under high pressure (up to 1000 bar) and a cavity contour (die). As the exact state of forming is of interest, an ultrasonic imaging system is under development. The task is to determine the geometry of a sheet metal contour with respect to the original (before forming) and the final (die) state of the sheet metal. For this purpose, two different contour reconstruction algorithms were designed, tested and compared. With the reconstruction results it will be possible to determine the optimal distribution of transmitters and receivers in the ultrasonic transducer matrix. Experiments were conducted with one pair of transducers (unfocussed, center frequency 2 MHz) and a three axis stepper motor set-up. For each experimental set of data, the contour was reconstructed with both SAFT reconstruction algorithms. Both algorithms incorporate a priori information such as original and final contour and maximal axial dislocation of the sheet metal. The results for both algorithms are compared and the relative mean error in axial direction is 0.30% and 0.48%. [Copyright &y& Elsevier]