Search

These recommendations are intended to provide guidance and to encourage best practice in reporting therapeutic ultrasound treatment parameters. Detailed uniform reporting will allow testing of therapy ultrasound systems and protocols, cross-comparison of studies between different teams using different systems and validation of therapeutic bio-effects. These recommendations have been divided into two sets, one for clinical and one for preclinical studies, each with stratified reporting categories, to account for the disparities in expertise and access to equipment between sites. The recommendations are intended to be useful for clinicians and researchers, for ethical and funding review boards and for the editors and reviewers of scientific journals.

Temperature estimation is a fundamental step in assessment of the efficacy of thermal therapy. A thermochromic material sensitive within the temperature range 52.5°C-75°C has been developed. The material is based on polyvinyl alcohol cryogel with the addition of a commercial thermochromic ink. It is simple to manufacture, low cost, non-toxic and versatile. The thermal response of the material was evaluated using multiple methods, including immersion in a temperature-controlled water bath, a temperature-controlled heated needle and high-intensity focused ultrasound (HIFU) sonication. Changes in colour were evaluated using both RGB (red, green, blue) maps and pixel intensities. Acoustic and thermal properties of the material were measured. Thermo-acoustic simulations were run with an open-source software, and results were compared with the HIFU experiments, showing good agreement. The material has good potential for the development of ultrasound therapy phantoms.

An experimental arrangement that allows in vitro exposure of cells to focused ultrasound-mediated hyperthermia (43°C–55°C) in a tissue-mimicking phantom with biological, acoustic and thermal properties comparable to those of human soft tissue is described. Cells were embedded in a compressed collagen gel, which was sandwiched between 6-mm-thick slices of biocompatible, acoustically absorbing and thermally tissue mimicking poly(vinyl alcohol) cryo-gel. To illustrate the system's potential, cells were exposed using a 1.66-MHz focused ultrasound beam (spatial-peak temporal-average intensities (ISPTA) = 900–1400 W/cm2) that traced out a circular trajectory (5–8 mm in diameter). Real-time temperature monitoring allowed cells to be exposed reproducibly to a pre-determined thermal dose. An experimental planning tool that estimates the thermal dose distribution throughout the sample and allows spatial correlation with cell position has been developed. Treatment response was evaluated qualitatively using microscopy and cell viability testing. This experimental arrangement has significant potential for future, biologically relevant, in vitro focused ultrasound-mediated hyperthermia studies.

This guidance is intended to encourage best practice among researchers into ultrasound bio-effects in terms of how they determine and report the exposure conditions used in their studies. It covers both diagnostic and therapeutic applications of ultrasound and is intended to be useful to the researchers themselves, to the review boards of ethical and funding committees and to the editors and reviewers of scientific journals. Recommendations are made for reporting formats, depending on the information available, and level of the study.

Cancer treatment by extracorporeal high-intensity focused ultrasound (HIFU) is constrained by the time required to ablate clinically relevant tumour volumes. Although cavitation may be used to optimize HIFU treatments, its role during lesion formation is ambiguous. Clear differentiation is required between acoustic cavitation (noninertial and inertial) effects and bubble formation arising from two thermally-driven effects (the vapourization of liquid into vapour, and the exsolution of formerly dissolved permanent gas out of the liquid and into gas spaces). This study uses clinically relevant HIFU exposures in degassed water and ex vivo bovine liver to test a suite of cavitation detection techniques that exploit passive and active acoustics, audible emissions and the electrical drive power fluctuations. Exposure regimes for different cavitation activities (none, acoustic cavitation and, for ex vivo tissue only, acoustic cavitation plus thermally-driven gas space formation) were identified both in degassed water and in ex vivo liver using the detectable characteristic acoustic emissions. The detection system proved effective in both degassed water and tissue, but requires optimization for future clinical application.

The use of focused ultrasound as a minimally invasive treatment for tumours is rapidly expanding. Target organs include the liver and kidneys. Both single element and phased array transducers may be used in the clinic. The presence of the rib cage presents a problem in high intensity focused ultrasound (HIFU) treatment planning, due to its high attenuation of the HIFU beam resulting in a loss of power at the focus as well as an increase in the risk of damage at the rib and to overlying tissues, including the skin. In this paper, a linearly segmented transducer, in which all active elements are driven in phase, has been investigated. The aim of the study was to investigate how a beam with a clinically useful profile could be achieved by removing the contribution of edge segments from one side of the transducer to the field. We have considered the case in which the HIFU beam approaches the rib cage during a treatment and investigated configurations of the transducer for which up to three segments on the edge are switched off. This problem has been studied initially using a linear acoustic field program to model the segmented transducer's acoustic beam profile. Experimental measurements of the transducer's acoustic field were performed using an automated beam plotting system. Temperature measurements were made on a rib surface for two transducer configurations using a fine wire thermocouple. A thermochromic liquid crystal material was used to assess qualitatively the heating pattern generated by the ultrasound beam. We show the rib sparing potential of the segmented transducer during HIFU treatment by demonstrating a reduction in the prefocal width of the ultrasound beam when edge segments are switched off. This has been predicted with the acoustic field model and demonstrated experimentally by acoustic field measurements and observations of the heating pattern generated by the ultrasound beam. A significant decrease in the temperature rise on a rib was observed in the case for which three edge segments were switched off compared with when all segments were active. We conclude that a segmented transducer extends the potential for treating liver tumours. In the case where the tumour lies behind, but close to the edge of, the ribs, energy loss at the focus and excessive heating in the rib and overlying tissue can be avoided by switching off edge segments.

Ultrasound (US)/microbubble-mediated gene delivery is a technology with many potential advantages suited to clinical application. Previous studies have demonstrated transfection but many are unsatisfactory in respect to the exposure apparatus, lack of definition of the US field or the limitations on parameters that can be explored using clinical diagnostic US machines. We investigated individual exposure parameters using a system minimising experimental artefacts and allowing control of many parameters of the US field. Using a 1-MHz transducer we systematically varied US parameters, the duration of exposure and the microbubble and DNA concentrations to optimise gene delivery. Delivery was achieved, using lipid microbubbles (SonoVue) and clinically acceptable US exposures, to adherent cells at efficiencies of approximately 4%. The acoustic pressure amplitude (0.25 MPa peak-negative), pulse repetition frequency (1-kHz) and duration of exposure (10 s) were important in optimising gene delivery with minimal impact on cell viability. These findings support the hypothesis that varying the physical parameters of US-mediated gene delivery has an affect on both efficiency and cell viability. These data are the first in terms of their thorough exploration of the US parameter space and will be the basis for more-informed approaches to developing clinical applications of this technology.

The effects of heat-generated changes on the attenuation of ultrasound (US) by porcine liver tissue have been studied over a frequency range of 2.0 to 5.0 MHz. Samples of fresh tissue, 4- to 5-mm thick, were pressurized and cooled before measurement. The insertion loss was measured at room temperature, using a broadband 3.5-MHz transducer of focal length 10 cm, employing a pulse-reflection technique. Fourier analysis of the results gave the frequency-dependence of the insertion loss. Samples were then heated in a water bath to a temperature in the range of 40 to 80 degrees C, for between 30 and 500 s. The insertion loss was then re-measured at room temperature. The frequency-dependence of the change in insertion loss, expressed as a coefficient, in dB/cm, was fitted by linear regression, from which the attenuation change at 3.5 MHz was determined. This change was attributed to protein coagulation. Increases of up to 2.4 dB/cm, (80 degrees C, 300 s) were found. The averaged data were fitted to a single step exponential model, resulting in a time constant on the order of 118 +/- 5 s, and an asymptotic limit to the increase of attenuation coefficient of 2.67 +/- 0.5 dB/cm.

Experiments were performed to investigate the production of harmonics by high-intensity focused ultrasound (HIFU) produced by a spherical bowl; spherical radius 15 cm, frequency 1.7 MHz, as a function of beam power in excised bovine liver. The intensity of the nth harmonic, in both water and the tissue sample, varied approximately as the nth power of the incident intensity up to the point at which irreversible changes were produced in the sample. The greatest observed axial power absorption enhancement factor was approximately 6.3, and the greatest observed total absorbed power enhancement was approximately 2.3. These enhancements may have some effect on the onset of lesioning, but not much effect on its subsequent development. In water, at an intensity of about 120 W/cm2 at the focus, the −3-dB beam diameters of harmonic components were observed to vary approximately as the inverse square root of the harmonic number.

The purpose of this investigation was to study the tissue damage (including blood vessels) on both normal and tumor-bearing experimental livers and the course of liver repair after focused ultrasound (FUS) treatment using histological evaluation. A series of experiments were carried out in vivo . Tissue was treated using arrays of ultrasound exposures with a frequency of 1.7 MHz, in situ spatially averaged focal intensity (I SAL in situ ) of 212–266 W/cm 2 (corresponding to in situ spatial peak intensity of 382–479 W/cm 2 ), 5–10 s exposure duration and 1.5–3.0 mm exposure separation. Tissue specimens were examined using both light and electron microscopy. The damage to the blood vessel walls was studied. The results showed the existence of indirect tissue damage in both normal and tumor tissue that is outside of the treatment volume, due to disruption of the major blood vessels supplying the adjacent area. Evidence for liver regeneration was found 2 months after FUS treatment.

This article reports treatment of implanted liver tumors (HSN fibrosarcoma) with focused ultrasound (FUS). Experiments were carried out on implanted liver tumors in vivo. In order to determine the optimum treatment conditions, various combinations of exposure parameters were investigated. The results showed that it is possible to achieve total destruction of tumor cells in the treatment volume using an FUS system with a frequency of 1.7 MHz, with in situ ISAL of 261 W/cm2, 5-s exposure duration, and 1.5-mm exposure separation, with an in situ ISAL of 266 W/cm2, 10-s duration, and 2-mm separation, or with in situ ISAL of 213 W/cm2, 8-s duration, and 1.5-mm separation. Fifteen selected tumors were treated with these experimentally determined "optimum" exposure conditions. All the tumors were destroyed completely. Assessment of tumor viability in the treated volume was performed using both histologic and tissue culture methods. The mechanism of tumor damage, the limitations of the tumor model, and the effect of exposure parameters and liver blood flow on the treatment are discussed.

Although there have been numerous models implemented for modeling thermal diffusion effects during focused ultrasound surgery (FUS), most have limited themselves to representing simple situations for which analytical solutions and the use of cylindrical geometries sufficed. For modeling single lesion formation and the heating patterns from a single exposure, good results were achieved in comparison with experimental results for predicting lesion size, shape and location. However, these types of approaches are insufficient when considering the heating of multiple sites with FUS exposures when the time interval between exposures is short. In such cases, the heat dissipation patterns from initial exposures in the lesion array formation can play a significant role in the heating patterns for later exposures. Understanding the effects of adjacent lesion formation, such as this, requires a three-dimensional (3-D) representation of the bioheat equation. Thus, we have developed a 3-D finite-element representation for modeling the thermal diffusion effects during FUS exposures in clinically relevant tissue volumes. The strength of this approach over past methods is its ability to represent arbitrarily shaped 3-D situations. Initial simulations have allowed calculation of the temperature distribution as a function of time for adjacent FUS exposures in excised bovine liver, with the individually computed point temperatures comparing favorably with published measurements. In addition to modeling these temperature distributions, the model was implemented in conjunction with an algorithm for calculating the thermal dose as a way of predicting lesion shape. Although used extensively in conventional hyperthermia applications, this thermal dose criterion has only been applied in a limited number of simulations in FUS for comparison with experimental measurements. In this study, simulations were run for focal depths 2 and 3 cm below the surface of pig's liver, using multiple intensity levels and exposure times. The results also compare favorably to published in vitro experimental measurements, which bodes well for future application to more complex problems, such as the modeling of multiple lesion arrays within complex anatomical geometries.

Mammalian tissues have differing sensitivities to damage by physical agents such as ultrasound. This article evaluates the scientific data in terms of known physical mechanisms of interaction and the impact on pre- and postnatal tissues. Actively dividing cells of the embryonic and fetal central nervous system are most readily disturbed. As a diagnostic ultrasound beam envelopes a small volume of tissue, it is possible that the effects of mild disturbance may not be detected unless major neural pathways are involved. There is evidence that ultrasound can be detected by the central nervous system; however, this does not necessarily imply that the bioeffect is hazardous to the fetus. Biologically significant temperature increases can occur at or near to bone in the fetus from the second trimester, if the beam is held stationary for more than 30 s in some pulsed Doppler applications. In this way, sensory organs that are encased in bone may be susceptible to heating by conduction. Reports in animals and humans of retarded growth and development following frequent exposures to diagnostic ultrasound, in the absence of significant heating, are difficult to explain from the current knowledge of ultrasound mechanisms. There is no evidence of cavitation effects occurring in the soft tissues of the fetus when exposed to diagnostic ultrasound; however, the possibility exists that such effects may be enhanced by the introduction of echo-contrast agents.

Temperature rise was observed as a function of time in liver and dog prostate tissue ex vivo during heating with high-intensity focused ultrasound. The temperature rise was measured using a needle thermocouple placed at the focus. The temperature vs. time behaviour closely followed the predictions of a model based on bulk and surface heating. When the tissue temperature was raised above 50 degrees C, an increase in heating rate was seen. At higher temperatures, a point was reached at which a marked, irreversible change of tissue properties was observed, consistent with protein denaturation. The change was sometimes accompanied by a sudden further rise in temperature followed by an equally sudden fall. On dissection, regions of tissue damage (lesions) were seen, sometimes containing bubbles consistent with acoustic cavitation or vaporisation.

The relationship between spatial peak intensity and the position of ultrasound induced tissue damage was studied in in vitro tissue models, using a 1.69 MHz spherical bowl transducer. The models corresponded to the transabdominal route to the bladder and prostate, which are potential target sites for focused ultrasound surgery. The results confirm that there is a relationship between lesion position and intensity, with lesions forming, under some exposure conditions, ahead of the geometric focus. Forward growth of lesions appears to be due to changes in the absorption characteristics of the tissue in the beam path. Using a computer model, we have demonstrated that the absorption coefficient of the tissue must increase significantly in front of the focus to enable lesions to form ahead of the predicted position. A possible mechanism for this is bubble formation as a result of acoustic cavitation. The effect of nonlinear propagation in the tissue, at the intensities studied, is shown to be relatively small.

This overview of bioeffects of ultrasound presents some key aspects of selected papers dealing with biophysical end-points. Its purpose is to establish a basis for exposure and dosimetric standards for medical ultrasonic equipment. It is intended to provide essential background resource material for the medical/scientific community, and more specifically for scientific working groups. This document was prepared by members of the Safety Committee of the World Federation for Ultrasound in Medicine and Biology. It was produced as a resource document in response to a request for information by Working Group 12 (Ultrasound exposure parameters) of the International Electrotechnical Commission Technical Committee 87, Ultrasonics. IEC TC 87, WG12 is the working group responsible for generating international standards for the classification of equipment by its acoustic fields based on safety thresholds. Our paper is intended to update and supplement information on the thermal mechanism provided in the publication, "WFUMB Symposium on Safety and Standardisation in Medical Ultrasound: Issues and Recommendations Regarding Thermal Mechanisms for Biological Effects of Ultrasound" (WFUMB 1992). It also provides an overview of trends in research into nonthermal mechanisms as a preliminary to the next WFUMB Symposium on Safety of Medical Ultrasound when this subject will be examined in detail by a select group of international experts. The WFUMB-sponsored workshop will take place in Utsunomiya, Japan during 11-15th July, 1994. The purpose of the meeting is to evaluate the scientific literature and to formulate internationally accepted recommendations on the safe use of diagnostic ultrasound that may be endorsed as official policy of the WFUMB. It should be noted that the current publication is not intended for review or endorsement as an official WFUMB document. It is produced as a scientific paper by individuals who are members of the WFUMB Safety Committee, and it therefore represents the opinions of the authors. Nevertheless, during the preparation of this document, contributions were received from members of the International Electrotechnical Commission Technical Committee 87 as well as many other individual experts, and the authors sincerely acknowledge their support.

Methods for quantitative imaging of ultrasound propagation properties were applied to the examination of the acoustic appearance of lesions generated by high intensity focused ultrasound in excised pig livers. Single lesions, about 10 mm maximum diameter by 30 mm long, were created in each of six liver specimens. Two dimensional images (32 by 32 points) of sound speed, mean attenuation coefficient (as a function of frequency in the range 3 to 8.5 MHz) and mean backscattering coefficient (5 to 8 MHz) were obtained in 7 mm thick sections of tissue, cut to include a cross-section through the lesion. Images of these properties, presented alongside surface photographs of the samples, provided a qualitative demonstration that attenuation coefficient was the most useful and backscattering coefficient was the least useful acoustic parameter for visualizing such lesions. Quantitatively the data demonstrated significant increases in attenuation coefficient and sound speed in lesioned liver relative to normal, whereas backscattering was shown not to change in a significant manner except when undissolved gas is the mechanism for increased acoustic scattering. Samples where gas was not fully removed following lesion production gave significant increases in backscattering at the lesion centre, but the shape and size of regions of high backscattering coefficient corresponded poorly with the shape and size of the lesions, unlike attenuation and sound speed for which such correspondence was good.

Hyperthermia is now established as a successful therapy for some tumours. It has been found that, for some tumours, the combination of heat and ionizing radiation is more effective than either type of treatment on its own. Ultrasound is commonly used to produce hyperthermia. We have therefore studied the effect of combined heat, ultrasound and 60 Co γ irradiation treatments on suspension cultures of V79 Chinese hamster lung fibro-blasts. Cells were exposed to 43°C hyperthermia with or without simultaneous continuous wave ultrasound (2.6 MHz, 2.3 W cm −2 ) either before or after 60 Co γ exposure (428 c Gy). It was found that when the two types of exposure followed one immediately after the other, then the ultrasound exposure increased the amount of cell killing produced by the combination of heat and ionizing radiation, whether the heat or the ionizing radiation came first. If an interval for repair of 72 minutes was left between the heat and ionizing radiation, then this enhancement was lost. The increase in cell killing produced by the ultrasound is shown to be caused by a mechanism that is nonthermal in origin.