Search

In the past decade, several publications have shown that it is advisable to design an advanced driver assistance system using a shared control structure. This paper is concerned with the modelling and verification of an interactive steering control strategy between a driver and an active front steering (AFS) controller to investigate the complex interactions between human driver and an AFS system. Using game theory as a general framework, a more comprehensive mathematical model system of interactive steering control potentially applicable to explore human drivers’ behaviours in shared control of intelligent vehicles is presented and discussed in this paper. The effects of different information patterns, namely the open-loop pattern and the closed-loop feedback pattern on modelling shared steering control between driver and AFS have been investigated. Simulation and hardware-in-loop implementation results prove the validity of steering interactive modelling in different game information patterns. Specifically, the results show that, in the Nash equilibrium strategy situation, the driver and the AFS controller may become more rational and reasonable in the process of completing the same dynamic task in the closed-loop feedback information patterns compared to the open-loop ones; and the differences between feedback Nash and feedback Stackelberg may depend on the step size of discretisation. [ABSTRACT FROM AUTHOR]

McPherson suspension modelling poses a challenging problem due to its nonlinear asymmetric behaviour. The paper proposes a planar quarter-car analytical model that not only considers vertical motion of the sprung mass (chassis) but also: (i) rotation and translation for the unsprung mass (wheel assembly), (ii) wheel mass and its inertia moment about the longitudinal axis, and (iii) tyre damping and lateral deflection. This kinematic–dynamic model offers a solution to two important shortcomings of the conventional quarter-car model: it accounts for geometry and for tyre modelling. The paper offers a systematic development of the planar model as well as the complete set of mathematical equations. This analytical model can be suitable for fast computation in hardware-in-the-loop applications. Furthermore, a reproducible Simulink implementation is given. The model has been compared with a realistic Adams/View simulation to analyse dynamic behaviour for the jounce and rebound motion of the wheel and two relevant kinematic parameters: camber angle and track width variation. [ABSTRACT FROM PUBLISHER]

This paper introduces a new pneumatic spring for vehicle suspension systems, allowing independent tuning of stiffness and ride height according to different vehicle operating conditions and driver preferences. The proposed pneumatic spring comprises a double-acting pneumatic cylinder, two accumulators and a tuning subsystem. This paper presents a detailed description of the pneumatic spring and its working principle. The mathematical model is established based on principles of thermo and fluid dynamics. An experimental setup has been designed and fabricated for testing and evaluating the proposed pneumatic spring. The analytical and experimental results confirm the capability of the new pneumatic spring system for independent tuning of stiffness and ride height. The mathematical model is verified and the capabilities of the pneumatic spring are further proved. It is concluded that this new pneumatic spring provides a more flexible suspension design alternative for meeting various conflicting suspension requirements for ride comfort and performance. [ABSTRACT FROM AUTHOR]

The paper shows that, during abrupt wheel torque transients for ice surface and low vehicle speeds, the tyre can develop significantly larger longitudinal force than the peak value of the tyre static curve. This so-called dynamic tyre friction potential (DTFP) effect has many influencing factors such as the rate of change of the wheel torque, the vehicle speed, and the tyre dwell time. The paper presents a detailed analysis of the DTFP behaviour based on the experimental data collected by using an in-wheel motor-based tyre test vehicle. The analysis results and an insight into the brush structure of a tyre model lead to the hypothesis that the different influencing factors may be predominantly explained by the bristle dwell time (BDT) effect. Following this hypothesis, the LuGre model of the tyre friction dynamics is extended with a physical BDT sub-model. The experimental validation results show that the proposed model can accurately capture the low-speed tyre-ice friction behaviour during abrupt wheel torque transients. [ABSTRACT FROM AUTHOR]

The paper describes a system for measuring road section parameters in a way that the results can be used in driving dynamics simulations. The system consists of sensorics and a data acquisition subsystem supported by software for generating 3D road section geometrical models. These models are then used as driving surfaces in dynamics simulation packages to investigate and analyse different aspects of road design and its role in traffic accident analysis, reconstruction and prevention. The paper presents examples of measurements, road section modelling and simulation results, obtained by means of different software simulation tools. It discusses possibilities of further development and improvement of the system. [ABSTRACT FROM AUTHOR]

In this paper, to analyse the rider's effects on the motion of a motorcycle, we model a rider–motorcycle system by taking into account the leaning motion of the rider's upper torso and his/her arm connection with the handlebars. The nonlinearity of the tyre force is introduced by utilising hyperbolic tangent functions to approximate a Magic Formula tyre model. On the basis of a derived nonlinear state-space model, we analyse the effects of not only the rider's arms but also his/her postures during steady turning by simulations. The rider's postures including lean-with, lean-in and lean-out are realised by adding the lean torque to the rider's upper torso. The motorcycle motion and the rider's effects are analysed in the case where the friction coefficient of the road surface changes severely during steady turning. In addition, a linearised state-space model is derived during steady turning, and a stability analysis of the rider–motorcycle system is performed. [ABSTRACT FROM PUBLISHER]

Multiple power sources in a hybrid vehicle allow for flexible vehicle power-train operations, but also impose kinematic constraints due to component characteristics. This paper presents a design process that enables systematic search and screening through all three major dimensions of hybrid vehicle designs - system configuration, component sizing and control, to achieve optimal performance while satisfying the imposed constraints. An automated dynamic modelling method is first developed which enables the construction of hybrid vehicle model efficiently. A screening process then narrows down to configurations that satisfy drivability and operation constraints. Finally, a design and control optimisation strategy is carried out to obtain the best execution of each configuration. A case study for the design of a power-split hybrid vehicle with optimal fuel economy is used to demonstrate this overall hybrid vehicle design process. [ABSTRACT FROM AUTHOR]

Previous work by the authors developed a novel model reduction method, namely importance analysis, that offered a unique set of properties: concurrent dynamic and kinematic reduction, applicability to nonlinear systems, preservation of realisation, and trajectory dependence. This paper investigates the utility of importance analysis as a model reduction tool within the context of vehicle dynamics. To this end, a high-fidelity model of a High Mobility Multipurpose Wheeled Vehicle (HMMWV) is considered, and this model is reduced for three different scenarios. Reduction is achieved in both dynamics and kinematics while preserving the original definition and interpretation of state variables and parameters. Furthermore, the resulting reduced models are very different in terms of complexity, containing only what is necessary for their respective scenarios, and providing important insight and computational savings. The conclusion is that importance analysis can be an invaluable reduction tool in vehicle dynamics, offering the aforementioned unique set of properties. [ABSTRACT FROM AUTHOR]

The previous freight wagon model developed at KTH is able to explain many of the phenomena observed in tests. In some cases, however, simulated and measured running behaviour differ. Therefore, in this paper, a new simulation model is presented and validated with on-track test results. The performance of standard two-axle freight wagons is investigated. The most important parameters for the running behaviour of the vehicle are the suspension characteristics. The variation in characteristics between different wagons is large due to geometrical tolerances of the components, wear, corrosion, moisture or other lubrication. The influence of the variation in suspension characteristics and other parameters on the behaviour of the wagon on tangent track and in curves is discussed. Finally, suggestions for improvements of the system are made. [ABSTRACT FROM AUTHOR]

Friction phenomena are extremely important in the suspension mechanisms used in automotive vehicles. Currently, there is no theory capable of explaining all the friction phenomena from a global perspective. In the case of telescopic hydraulic shock absorbers, the additional contribution of force given by the friction in the range of low damping velocities increases the capability of energy dissipation. In contrast, the continuous transitions between adherence and sliding of the telescopic mechanism diminishes the capability of generating comfort. Moreover, the fluctuations of inner pressures and external side loads have to be added as purely dynamic factors affecting the friction variations. This paper explains the improvements obtained in the modelling of friction phenomena in sliding conditions, by proposing a new formulation of the Stribeck effect and the viscous friction, considering these two effects as associated concepts in the case of the suspension shock absorbers. [ABSTRACT FROM AUTHOR]

Using the very old idea, the wedge, there is a good opportunity to realize the self-amplified system. The basic idea is that the rotation energy of the brake disc can be used as an actuation source for the brake system. In this way, the additional actuation force comes with the intervention of friction. The value of the friction coefficient varies in a very wide range, and its effect is very important from the viewpoint of the control algorithm. The system can come to the instable state easier if the coefficient of friction-wedge angle pairs produce self-locking state. In order to analyse the behaviour of this self-energizing brake system, a mechanical model has been created including the accurate description of friction characteristics. This paper focuses on the modelling steps of the self-energizing wedge brake. A complete parameter analysis will be demonstrated in order to understand the model. The stability conditions of the model will be analysed. [ABSTRACT FROM AUTHOR]