Search

Abstract: Waste lead storage battery is the most important recyclable lead material not only in various European and other OECD countries but also in China. Pollution control of lead has become the focus of people’s attention in the world. A vacuum process for recycling waste lead storage battery was developed in this work. The experimental results showed that all the valuable materials in waste lead storage battery could be satisfactorily recycled by vacuum technologies. The vacuum melting of lead grids and the vacuum reduction of lead pastes produce the lead bullion with the direct recovery ratio of 96.29% and 98.98%, respectively. The vacuum pyrolysis of plastics can produce pyrolysis oil with yield of more than 93 wt.%. These vacuum recycling technologies offer improvements in metallurgical and environmental performance. [Copyright &y& Elsevier]

• A novel technology, for atomic economic recovery of lead paste, is proposed. • Direct recovery ratio of Pb reaches 99.29%, which means that Pb-loss is very little. • Sb-content in crude Pb-Sb alloy decreased from 46% to 0.98%. • The technology has advantages of lower cost and less pollution, etc. Until today, there are still many problems that must be solved through innovative research to make the recycling of spent lead-acid batteries and the separation of Pb-Sb alloy more environmentally friendly and energy-saving. In this paper, a novel method for regenerating lead paste, by vacuum reduction reaction coupling with separation of Pb-Sb alloy, was developed. In this process, antimony from Pb-Sb alloy is used to reduce desulfurized lead paste into lead under vacuum, while it is oxidized into volatile Sb 2 O 3 as by-product. The results showed that direct recovery ratio of Pb from desulfurized lead paste reached 99.29% and Sb-content in Pb-Sb alloy decreased from 46% to 0.98% under following conditions: the mass ratio of desulfurized lead paste to Pb-Sb alloy of 1.50, residual gas pressure of 30 Pa, reduction temperature of 810 °C for 50 min. By this method, not only the lead paste can be recovered with high atom economy, but also the Pb-Sb alloy can be separated efficiently at zero cost and without "three wastes" generation. Therefore, this method is very useful for the recycling of spent lead-acid battery and the separation of Pb-Sb alloy. [ABSTRACT FROM AUTHOR]