Search

A new design of membrane capacitive deionization (MCDI) cell was constructed by packing the cell's flow chamber with granular activated carbon (GAC). The GAC packed-MCDI (GAC-MCDI) delivered higher (1.2–2.5 times) desalination rates than the regular MCDI at all test NaCl concentrations (∼100–1000 mg/L). The greatest performance enhancement by packed GAC was observed when treating saline water with an initial NaCl concentration of 100 mg/L. Several different GAC materials were tested and they all exhibited similar enhancement effects. Comparatively, packing the MCDI's flow chamber with glass beads (GB; non-conductive) and graphite granules (GG; conductive but with lower specific surface area than GAC) resulted in inferior desalination performance. Electrochemical impedance spectroscopy (EIS) analysis showed that the GAC-MCDI had considerably smaller internal resistance than the regular MCDI (∼19.2 ± 1.2 Ω versus ∼1222 ± 15 Ω at 100 mg/L NaCl). The packed GAC also decreased the ionic resistance across the flow chamber (∼1.49 ± 0.05 Ω versus ∼1130 ± 12 Ω at 100 mg/L NaCl). The electric double layer (EDL) formed on the GAC surface was considered to store salt ions during electrosorption, and facilitate the ion transport in the flow chamber because of the higher ion conductivity in the EDLs than in the bulk solution, thereby enhancing the MCDI's desalination rate. [ABSTRACT FROM AUTHOR]

l Why FCDI can be part electrodialysis and part electrosorption? l Resistance to charge transport is essential towards the performance of FCDI. l Distinguish the electronic and ionic resistance within a flow-electrode. l Enhancing electronic conduction greatly contributes to improve FCDI performance. Flow-electrode capacitive deionization (FCDI), as a novel electro-driven desalination technology, has attracted growing exploration towards brackish water treatment, hypersaline water treatment, and selective resource recovery in recent years. As a flow-electrode-based electrochemical technology, FCDI has similarities with several other electrochemical technologies such as electrochemical flow capacitors and semi-solid fuel cells, whose performance are closely coupled with the characteristics of the flow-electrodes. In this review, we sort out the potentially parallel mechanisms of electrosorption and electrodialysis in the FCDI desalination process, and make clear the importance of the flowable capacitive electrodes. We then adopt an equivalent circuit model to distinguish the resistances to ion transport and electron transport within the electrodes, and clarify the importance of electronic conductivity on the system performance based on a series of electrochemical tests. Furthermore, we discuss the effects of electrode selection and flow circulation patterns on system performance (energy consumption, salt removal rate), review the current treatment targets and system performance, and then provide an outlook on the research directions in the field to support further applications of FCDI. [ABSTRACT FROM AUTHOR]