Search

Abstract Carbon-rich waste materials (solid, liquid, or gaseous) are largely considered to be a burden on society due to the large capital and energy costs for their treatment and disposal. However, solid and liquid organic wastes have inherent energy and value, and similar as waste CO 2 gas they can be reused to produce value-added chemicals and materials. There has been a paradigm shift towards developing a closed loop, biorefinery approach for the valorization of these wastes into value-added products, and such an approach enables a more carbon-efficient and circular economy. This review quantitatively analyzes the state-of-the-art of the emerging microbial electrochemical technology (MET) platform and provides critical perspectives on research advancement and technology development. The review offers side-by-side comparison between microbial electrosynthesis (MES) and electro-fermentation (EF) processes in terms of principles, key performance metrics, data analysis, and microorganisms. The study also summarizes all the processes and products that have been developed using MES and EF to date for organic waste and CO 2 valorization. It finally identifies the technological and economic potentials and challenges on future system development. Graphical abstract Image 1 Highlights • Current status summary on CO 2 and organic waste valorization by MET. • A comprehensive and quantitative on this technology platform. • Side-by-side comparison of microbial electrosynthesis and electro-fermentation. [ABSTRACT FROM AUTHOR]

• Biohythane production from MEC led to positive energy recovery • Dual-chamber MEC could stabilize biohythane generation and composition • Methanogen in single-chamber MEC consumed hydrogen to unbalance composition • CEM was key part to maintain hydrogen production for stable biohythane composition • Geobacter and methanogens were key species to affect biohythane composition Biohythane is alternative fuel to replace fossil fuel for car combustion, and biohythane generation could be potential pathway for energy recovery from wastewater treatment. Microbial electrolysis cell (MEC) is electrochemical technique to convert waste to methane and hydrogen gas for biohythane generation, but the feasibility and stability of MEC needs further investigation to assure sustainable energy recovery. System configuration is paramount factor for electrochemical reaction and mass transfer, and this study was to investigate the configuration impact (single vs dual chamber) of MEC for biohythane generation rate and stability. This study showed that dual-chamber MEC could separate methane and hydrogen gas production in the anode and cathode, and combined both together to produce biohythane. To reduce ohmic resistance for higher current, cation exchange membrane (CEM) was removed from dual-chamber to single-chamber MEC. However, free hydrogen diffusion was allowed in the single chamber since CEM was removed. The diffused hydrogen and substrate towards the cathode would favor the methanogen growth, and thus the hydrogen was consumed to reduce the biohythane generation and energy recovery efficiency (i.e., 7.5 × 10−3 reduced to 5.7 × 10−3 kWh kg−1 degraded COD day−1 after converting dual-chamber to single-chamber MEC). Absolute abundance of methanogen in single-chamber MEC was greatly boosted, as Methanosarcina and Methanobacteriale on the anode surface, increased by 132% and 243%, respectively, while the original dual-chamber MEC could maintain Geobacter growth for high current generation. This is the keystone study to demonstrate the importance of dual-chamber MEC for the feasibility and stability for the biohythane generation, building up the foundation to use electrochemical device to convert the organic waste to the alternative biohythane. [Display omitted] [ABSTRACT FROM AUTHOR]

Bioelectrochemical system (BES) is promising technology to simultaneously treat wastewater and recover energy, and electrode material is important for the system performance. Microbial fuel cell (MFC) is one of typical BES to be applied in wastewater treatment. How to improve the electrode material is significant to improve wastewater treatment, energy recovery and cost effectiveness. In this study, 3D-weaved carbon electrode entity, assembled by multiple pieces of carbon mesh (CM), was proposed to combine all electrode components as entity to facilitate electron conduction and ionic migration, compared with carbon brush (CB) and granular activated carbon (GAC). The result showed that current density and internal resistance of MFC using 3D-weaved CM as horizontally extended inside anode (CM(T)) were 30.9 A m-3 and 4.5 Ω, respectively, with higher output than traditional GAC (22.6 A m-3 and 6.2 Ω). Though GAC had greater electrode filling and surface area for biomass growth, the electron transfer efficiency per unit electrode biomass was only at 0.0019 ± 0.0002 mol g-1 d-1, much lower than CM(T) at 0.0077 ± 0.0009 mol g-1 day-1. Higher ionic migration rate of CM(T) suggested the assisting effect of composite electrode to enhance ionic transportation towards the cathode. Microbial analysis further indicated that 3D-CM electrode network could simultaneously enhance Geobacter abundance and methanogen activity, suggesting the importance of electrode network on electricigens. Furthermore, CM(T) could obtain 10 times higher energy output efficiency than traditional GAC when applied inside anode chamber. This study proved that network construction of anode electrode could promote the electrode performance and cost effectiveness, suggesting the future development of reactor design of bioelectrochemical system. Image 1 • Anode configuration impacted biomass growth and electron conduction. • 3D carbon mesh constructed as electron network entity for conducting facility. • Electrode entity construction greatly benefited electron generation efficiency. • 3D carbon mesh stimulated microbial activity and Geobacter growth. • Massive cost optimization achieved by 3D carbon mesh. [ABSTRACT FROM AUTHOR]