Search

In this paper, the development of action and event detectors over the past three decades is summarized. The detectors are divided into 2D detectors, 3D detectors and deep learning detectors according to whether they contain spatial information and whether they use deep learning. This paper briefly introduces the typical detectors of the different types mentioned above, and explains the advantages, disadvantages and characteristics respectively, and compares them. Comparing traditional feature detection methods with ones based on deep learning, we found that the method of first detecting microscopic details such as point, line, surface angle, etc., and then performing action and event recognition is no longer the mainstream of current research. Due to the strong generalization ability, end-to-end action and event recognition methods based on deep learning perform better than traditional methods. Finally, this paper proposes three research directions for action recognition and event recognition based on feature detectors. [ABSTRACT FROM AUTHOR]

Ageing and its related health conditions bring many challenges not only to individuals but also to society. Various MRI techniques are defined for the early detection of age-related diseases. Researchers continue the prediction with the involvement of different strategies. In that manner, this research intends to propose a new brain age prediction model under the processing of certain steps like preprocessing, feature extraction, feature selection, and prediction. The initial step is preprocessing, where improved median filtering is proposed to reduce the noise in the image. After this, feature extraction takes place, where shape-based features, statistical features, and texture features are extracted. Particularly, Improved LGTrP features are extracted. However, the curse of dimensionality becomes a serious issue in this aspect that shrinks the efficiency of the prediction level. According to the "curse of dimensionality," the number of samples required to estimate any function accurately increases exponentially as the number of input variables increases. Hence, a feature selection model with improvement has been introduced in this paper termed an improved Chi-square. Finally, for prediction purposes, a Hybrid classifier is introduced by combining the models like Bi-GRU and DBN, respectively. In order to enhance the effectiveness of the hybrid method, Upgraded Blue Monkey Optimization with Improvised Evaluation (UBMOIE) is introduced as the training system by tuning the optimal weights in both classifiers. Finally, the performance of the suggested UBMIOE-based brain age prediction method was assessed over the other schemes to various metrics. [ABSTRACT FROM AUTHOR]

The conventional approach to event extraction requires predefined event types and their corresponding annotations to train event extractors. However, these prerequisites are often difficult to satisfy in real-world applications. To automatically induct event types, most work has been devoted to clustering event triggers, where a cluster of event triggers is represented as an event type. Some works use trigger semantics, while others use co-occurrence relationships to cluster triggers. However, the clustering results of event triggers obtained by the above work are not sufficiently detailed in describing event types, making it difficult to accurately determine the corresponding event types manually. This paper proposes an open-domain event type induction framework that automatically discovers a set of event types from a given corpus. Unlike previous work on event trigger clustering, this paper takes into consideration the hierarchical relationship of event types to partition the event trigger clusters into event mains and subtypes. The framework employs a latent variable-based neural generation module and a semantic-based clustering module, the former of which obtains event trigger clusters representing the main types of events by jointly projecting the co-occurrence and semantic information of event triggers into a latent space for event type latent variable mining, and the latter of which further divides these event trigger clusters into event subtypes based on semantic information. Finally, experiment results show that, compared with the benchmark model, the ETGen-Clus can improve event type quality scores of 6.23% and 3.11% on the two datasets, respectively. [ABSTRACT FROM AUTHOR]

User feedback data (e.g., clicks, dwell time in the product detail page) have been incorporated in the training process of many ranking models for better performance. Such approaches are widely used in many ranking applications, including search and recommendation. Recently, the inherent biases in user feedback data have been studied, which indicates how the users' behaviors can be affected by factors other than relevancy. By identifying and removing these biases, the ranking models can be further improved. Researchers have developed a variety of debiasing methods on different bias factors. Most of them only focus on one type of bias and pay little attention to different types of bias from a unified perspective. In this paper, we conduct a comprehensive study of bias focusing on the application of ranking problems in recommender systems which is highly important for the research of web intelligence. Then, we share our experiences derived from designing and optimizing unbiased models to improve feeds recommendation. To uncover the effects of biases and achieve better ranking performance, we propose several unbiased models and compare with state-of-the-art models. We conduct extensive offline experiments on real datasets and validate the effectiveness of our method by performing online A/B testing in a real-world recommender system. [ABSTRACT FROM AUTHOR]

Agriculture is a significant source of income, and categorizing the crop has turned into vital factor that aids more in the crop production sector. Traditionally, crop development stage determination is done manually by eye inspection. However, producing high-quality crop type maps using modern approaches remains difficult. In this paper, the hyperspectral crop image classification model is proposed that includes four stages, they are (a) preprocessing, (b) segmentation, (c) feature extraction and (d) classification. In the preprocessing step, the hyperspectral image is provided as input, where the filtering process will carried out using median filtering. The filtered image is then used as the segmentation’s input. The image is segmented in the segmentation step using the enhanced entropy-based fuzzy c-means technique. Subsequently, spectral spatial features and vegetation index-based features are derived from segmented images. The final step is the classification, where the ensemble of classification model will be used that includes models like Convolutional Neural Networks (CNN), Deep Maxout (DMO), Recurrent Neural Networks (RNN), and Bidirectional Gated Recurrent Unit (Bi-GRU), respectively. The proposed Self Improved Tasmanian devil Optimization (SI-TDO) approach has optimally adjusted the Bi-GRU model’s training weights to enhance ensemble classification performance. Finally, the effectiveness of the proposed SI-TDO method compared to the traditional algorithm is examined for several metrics. The SI-TDO obtained the greatest accuracy of 94.68% in training rate 80, while other existing models have the lowest ratings. [ABSTRACT FROM AUTHOR]

Due to the enormous content of text available online through emails, social media, and news articles, it has become complicated to summarize the textual information from multiple documents. Text summarization automatically creates a comprehensive description of the document that retains its informative contents through the keywords, where Multi-Document Summarization (MDS) is a productive tool for data accumulation that creates a concise and informative summary from the documents. In order to extract the relevant information from the documents, Graph neural networks (GNNs) is the neural structure that detains the interrelation of the graph by progressing the messages between the graphical nodes. In the current years, the advanced version of GNNs, such as graph attention network (GAN), graph recurrent network, and graph convolutional network (GCN) provides a remarkable performance in text summarization with the advantage of deep learning techniques. Hence, in this survey, graph approaches for text summarization has been analyzed and discussed, where the recent text summarization model based on Deep learning techniques are highlighted. Further, the article provides the taxonomy to abstract the design pattern of Neural Networks and conducts a comprehensive of the existing text summarization model. Finally, the review article enlists the future direction of the researcher, which would motivate the enthusiastic and novel contributions in text summarizations. [ABSTRACT FROM AUTHOR]

Mobile Ad-Hoc Network (MANETs) is referred to as the mobile wireless nodes that make up ad hoc networks. The network topology may fluctuate on a regular basis due to node mobility. Each node serves as a router, passing traffic throughout the network, and they construct the network’s infrastructure on their own. MANET routing protocols need to be able to store routing information and adjust to changes in the network topology in order to forward packets to their destinations. While mobile networks are the main application for MANET routing techniques, networks with stationary nodes and no network infrastructure can also benefit from using them. In this paper, we proposed a Self Adaptive Tasmanian Devil Optimization (SATDO) based Routing and Data Aggregation in MANET. The first step in the process is clustering, where the best cluster heads are chosen according to a number of limitations, such as energy, distance, delay, and enhanced risk factor assessment on security conditions. In this study, the SATDO algorithm is proposed for this optimal selection. Subsequent to the clustering process, routing will optimally take place via the same SATDO algorithm introduced in this work. Finally, an improved kernel least mean square-based data aggregation method is carried out to avoid data redundancy. The efficiency of the suggested routing model is contrasted with the conventional algorithms via different performance measures. [ABSTRACT FROM AUTHOR]

The rapid progress in the transfer of information and its availability are the reasons behind the widespread use of the Internet. Document images are the most complicated and challenging category among various forms of digital data to which watermarking can be applied for its security and authentication. Watermarking of the document image is a very difficult task, since these images have very limited redundancy. Because of this factor there has been very little research in this area. A comprehensive research should be carried out to ensure the effective assessment, review as well as implementation of document image watermarking techniques. This paper reviews the existing document image watermarking by considering different evaluation parameters. Based on this review, a variety of challenges and directions have been prescribed for the development of effective watermarking techniques for document images. [ABSTRACT FROM AUTHOR]

Software Defined Network (SDN) facilitates a centralized control management of devices in network, which solves many issues in the old network. However, as the modern era generates a vast amount of data, the controller in an SDN could become overloaded. Numerous investigators have offered their opinions on how to address the issue of controller overloading in order to resolve it. Mostly the traditional models consider two or three parameters to evenly distribute the load in SDN, which is not sufficient for precise load balancing strategy. Hence, an effective load balancing model is in need that considers different parameters. Considering this aspect, this paper presents a new load balancing model in SDN is introduced by following three major phases: (a) work load prediction, (b) optimal load balancing, and (c) switch migration. Initially, work load prediction is done via improved Deep Maxout Network. COA and BWO are conceptually combined in the proposed hybrid optimization technique known as Coati Updated Black Widow (CUBW). Then, the optimal load balancing is done via hybrid optimization named Coati Updated Black Widow (CUBW) Optimization Algorithm. The optimal load balancing is done by considering migration time, migration cost, distance and load balancing parameters like server load, response time and turnaround time. Finally, switch migration is carried out by considering the constraints like migration time, migration cost, and distance. The migration time of the proposed method achieves lower value, which is 27.3%, 40.8%, 24.40%, 41.8%, 42.8%, 42.2%, 40.0%, and 41.6% higher than the previous models like BMO, BES, AOA, TDO, CSO, GLSOM, HDD-PLB, BWO and COA respectively. Finally, the performance of proposed work is validated over the conventional methods in terms of different analysis. [ABSTRACT FROM AUTHOR]

This document is a call for a new era of artificial intelligence (AI) in the connected world, specifically focusing on the field of Web Intelligence (WI). WI has evolved over the past 20 years, with three significant stages: WI 1.0 (Wisdom Web), WI 2.0 (Wisdom Web of Thing), and WI 3.0 (Wisdom Web of Everything). The document highlights several papers published in the Web Intelligence journal that explore different aspects of WI, including its impact on a better connected world, cross-cutting areas with brain informatics, biases in recommender systems, the influence of ChatGPT on information retrieval, the role of big data in the retail industry, order pairing mechanisms in real-time ride-sharing, data replication in cloud systems, and security risks in IoT-fog architecture. The document calls for more collaboration and communication among researchers in the WI field and emphasizes the importance of global interactions for co-intelligence and co-creation. [Extracted from the article]

Ride-sharing contributes significantly to lowering trip expenses, easing traffic congestion and decreasing air pollution. However, current order pairing approaches in ride-sharing usually focus on minimizing total trip distances or maximizing platform profits, overlooking the drivers' desire for increased earnings. As a result, drivers might provide dishonest information to gain higher profits, leading to inefficient order pairing for the ride-sharing platform and potential losses for both the platform and drivers. In this paper, we address this challenging issue by developing efficient order pairing mechanisms that maximize the social welfare of the platform and drivers. Specifically, we introduce two truthful auction-based order pairing mechanisms, SWMOM-VCG and SWMOM-GM, where drivers bid on platform-published orders to complete them and earn profits. We provide theoretical proof that both mechanisms fulfill the criteria of individual rationality, profitability, truthfulness and so on. Using real taxi order data from New York City, we assess the performance of both mechanisms and show that they achieve greater social welfare compared to existing methods. Additionally, we find that SWMOM-GM requires less computation time than SWMOM-VCG for order pairing, with only a minor reduction in social welfare. [ABSTRACT FROM AUTHOR]

The rapid advancement of artificial intelligence (AI) has spotlighted ChatGPT as a key technology in the realm of information retrieval (IR). Unlike its predecessors, it offers notable advantages that have captured the interest of both industry and academia. While some consider ChatGPT to be a revolutionary innovation, others believe its success stems from smart product and market strategy integration. The advent of ChatGPT and GPT-4 has ushered in a new era of Generative AI, producing content that diverges from training examples, and surpassing the capabilities of OpenAI's previous GPT-3 model. In contrast to the established supervised learning approach in IR tasks, ChatGPT challenges traditional paradigms, introducing fresh challenges and opportunities in text quality assurance, model bias, and efficiency. This paper aims to explore the influence of ChatGPT on IR tasks, providing insights into its potential future trajectory. [ABSTRACT FROM AUTHOR]

This paper is a brief personal journal of our relentless pursuit of Web Intelligence (WI). How it all started? What have achieved? Where are we heading? Our search for the ultimate meaning of the Web enables us to see and appreciate the power of the Web for building a better human society through collaboration, co-learning, and co-creation. The Web is a powerful idea, a scientific and technological innovation, and a social creation. Web Intelligence explores the connectivity, diversity, and plasticity of the Web, as well as the global brain supported by the Web. The goal of research on Web Intelligence is to build a better connected world of everything, by people, and for a new intelligent human society. [ABSTRACT FROM AUTHOR]

In a distributed environment, replication is the most investigated phenomenon. Replication is a way of storing numerous copies of the same data at different locations. Whenever data is needed, it will be fetched from the nearest accessible copy, avoiding delays and improving system performance. To manage the replica placement strategy in the Cloud, three key challenges must be addressed. The challenges in determining the best time to make replicas were generated, the kind of files to replicate, as well as the best location to store the replicas. This survey conducts a review of 65 articles published on data replication in the cloud. The literature review examines a series of research publications and offers a detailed analysis. The analysis begins by presenting several replication strategies in the reviewing articles. Analysis of each contributor's performance measures is conducted. Moreover, this survey offers a comprehensive examination of data auditing systems. This work also determines the analytical evaluation of replication handling in the cloud. Furthermore, the evaluation tools used in the papers are examined. Furthermore, the survey describes a lot of research issues & limitations that might help researchers support better future work on pattern mining for data replication in the cloud. [ABSTRACT FROM AUTHOR]

Diagnosing plant disease is a major role to reduce adequate losses in yield production, which further leads to economic losses. The various disease control measures are accessible without a proper diagnosis of the disease which results in a waste of expenses and time. The diagnosis of disease using images leads to unsatisfactory results in the prevalent methods due to the image clarity. It is mainly caused by the worst performance of the existing pre-trained image classifiers. This issue can be controlled by the SMoGW-deep convolutional neural network (deep CNN) classifier for the accurate and precise classification of plant leaf disease. The developed method transforms the poor-quality captured images into high quality by the preprocessing technique. The preprocessed input images contain pixels on their dimension and also the value of the threshold is analyzed by the Otsu method by which the particular disease-affected region is extracted based on the image pixels. The region of interest is separated from the other parts of the input leaf image using the K-means segmentation technique. The stored features in the feature vector are fed forward to the deep CNN classifier for training and are optimized by the SMoGW optimization approach. The experiments are done and achieved an accuracy of 94.5% sensitivity of 94.525%, specificity of 94.6%, precision of 95% with 90% of training data and under K-fold training with 95% of accuracy, 95% of sensitivity, 94.1% of specificity, and 92.1% of precession is achieved for the SMoGW-optimized classifier approach that is superior to the prevalent techniques for disease classification and detection. The potential, as well as the capability of the proposed method, is experimentally demonstrated for plant leaf disease classification and identification. [ABSTRACT FROM AUTHOR]

IoT technologies & UAVs are frequently utilized in ecological monitoring areas. Unmanned Aerial Vehicles (UAVs) & IoT in farming technology can evaluate crop disease & pest incidence from the ground's micro & macro aspects, correspondingly. UAVs could capture images of farms using a spectral camera system, and these images are been used to examine the presence of agricultural pests and diseases. In this research work, a novel IoT- assisted UAV- based pest detection with Arithmetic Crossover based Black Widow Optimization-Convolutional Neural Network (ACBWO-CNN) model is developed in the field of agriculture. Cloud computing mechanism is used for monitoring and discovering the pest during crop production by using UAVs. The need for this method is to provide data centers, so there is a necessary amount of memory storage in addition to the processing of several images. Initially, the collected input image by the UAV is assumed on handling the via-IoT-cloud server, from which the pest identification takes place. The pest detection unit will be designed with three major phases: (a) background &foreground Segmentation, (b) Feature Extraction & (c) Classification. In the foreground and background Segmentation phase, the K-means clustering will be utilized for segmenting the pest images. From the segmented images, it extracts the features including Local Binary Pattern (LBP) &improved Local Vector Pattern (LVP) features. With these features, the optimized CNN classifier in the classification phase will be trained for the identification of pests in crops. Since the final detection outcome is from the Convolutional Neural Network (CNN); its weights are fine-tuned through the ACBWO approach. Thus, the output from optimized CNN will portray the type of pest identified in the field. This method's performance is compared to other existing methods concerning a few measures. [ABSTRACT FROM AUTHOR]

Testing and debugging have been the most significant steps of software development since it is tricky for engineers to create error-free software. Software testing takes place after coding with the goal of finding flaws. If errors are found, debugging would be done to identify the source of the errors so that they may be fixed. Detecting as well as locating defects are thus two essential stages in the creation of software. We have created a unique approach with the following two working phases to generate a minimized test suite that is capable of both detecting and localizing faults. In the initial test suite minimization process, the cases were generated and minimized based on the objectives such as D-score and coverage by the utilization of the proposed Blue Monkey Customized Black Widow (BMCBW) algorithm. After this test suite minimization, the fault validation is done which includes the process of fault detection and localization. For this fault validation, we have utilized an improved Long Short-Term Memory (LSTM). At 90% of the learning rate the accuracy of the presented work is 0.97%, 2.20%, 2.52%, 0.97% and 2.81% is better than the other extant models like AOA, COOT, BES, BMO and BWO methods. The results obtained proved that our Blue Monkey Customized Black Widow Optimization-based fault detection and localization approach can provide superior outcomes. [ABSTRACT FROM AUTHOR]