Search

Treatment modalities of ependymoma in infants remain controversial. Postoperative adjuvant radiotherapy could prolong overall survival but has the potential to affect nervous system development in infants. The role of adjuvant chemotherapy in prolonging overall survival for infants with ependymoma is still unclear. Therefore we designed this study to explore the effect of treatment modalities on survival time of infants with ependymoma. We studied 72 infants with ependymoma from the Surveillance, Epidemiology, and End Results database in this retrospective analysis. Univariate and multivariate Cox proportional hazard models were adopted to determine hazard ratios and compare overall survival. Among 72 infants with ependymoma, 35 were male (48.6%) and 37 were female (51.4%). The 5-year overall survival of all patients was 67%. Forty-six infants (63.9%) received gross total resection, 20 (27.8%) received subtotal resection, and 6 (8.3%) did not receive surgical resection or only autopsy. Twenty-one infants (29.2%) received radiotherapy, and 45 (62.5%) received chemotherapy. Multivariate analysis revealed that patients accepted surgical resection (No vs. gross total resection, P < 0.001; No vs. subtotal resection, P = 0.026) and chemotherapy (No vs. Yes, P = 0.024) are the independent prognostic factors for overall survival. Treatment modality is associated with survival time in infants with ependymoma. The extent of resection and chemotherapy were independent prognostic factors for infants with ependymoma. [ABSTRACT FROM AUTHOR]

Objective Unfamiliarity with the morphometry of the assimilated C1 lateral mass (C1LM) could make screw placement dangerous. In the present study, we defined the morphometric dimensions of the occipitalized C1LM to provide surgeons with valuable information for preoperative planning. Methods Thin-slice computed tomography scanning data from 131 patients with occipitalization of the atlas (OA) and 50 control cases were imported into Mimics software for analysis. The widths and heights of the C1LM were fully measured in the different planes. The ideal inward angulation and the safe maximum cephalic angulation of C1 screw trajectory were evaluated. Results Except for the medial height, all the widths and heights of C1LM were significantly shorter in the OA group than those in the control group. The ideal inward angle (α) was significantly larger in the OA group (23.8° ± 8.3°) than that (15.3° ± 3.8°) in the control group; the corresponding screw length was also significantly longer in the OA group (20.9 ± 2.9 mm). The safe maximum cephalic angles (β) of the screw trajectory did not reach a significant difference between the 2 groups. All the widths and heights were shorter in the females than those in the males. The α angle also did not reach a significant difference between the sexes; however, the β angles in the males (35.9° ± 10.4°) was significantly larger than that in the females (32.0° ± 9.4°). Conclusions Although the hypoplastic C1LM brings limitations to screw insertion to some extent, it is still broad enough to accommodate a screw safely in both female and male patients. Considering the irregularity of the C1LM in patients with OA, the preoperative imaging assessment is critical, and C1LM screw placement should be performed individually. Highlights • The volume of the C1LM with occipitalization is hypoplastic. • The assimilated C1LM is still broad enough to accommodate a screw safely in both female and male patients. • The inward angle of the screw trajectory will be larger in the OA group than that in the control group. • The safe maximum cephalic angle of the screw trajectory was not different between the OA and control groups. • The volume of the C1LM in women is small compared with that in men. [ABSTRACT FROM AUTHOR]

Objective To introduce and assess a surgical treatment of occipitocervical (OC) dislocation with atlas assimilation and Klippel-Feil syndrome (KFS) using occipitalized C1 lateral mass and C2 fixation and reduction technique. Methods From January 2007 to August 2013, 58 symptomatic patients with OC dislocation and KFS of C2-3 congenital fusion and atlas assimilation were surgically treated in our institution via this technique. After opening the C1-2 facet joints via a posterior approach, OC reduction was conducted by intraoperative manipulation and C1 lateral mass and C2 pedicle screw and rod fixation. The instrument position, fusion status, and clinical outcome were analyzed. Results The average follow-up was 36 months (range, 18–52 months). Radiologically, effective reduction was achieved in 56 patients (96.6%) and <50% reduction in 2 (3.4%) who had additional transoral decompression. Neurologic improvement and solid bone fusion were achieved in all patients. The clinical symptoms improved for all patients, with the averaged Japanese Orthopedic Association myelopathy scores increasing from 11.5 to 15.6 ( P < 0.01). Conclusions In patients with OC dislocation and KFS of C2-3 fusion and atlas assimilation, posterior manipulative reduction combined with occipitalized C1 lateral mass and C2 fixation provides a reliable and effective treatment. [ABSTRACT FROM AUTHOR]

To evaluate the usefulness of 3-dimensional (3D) printed models as an aid for the treatment of complex CVJ anomalies. 3D printed models were fabricated for 21 patients with complex CVJ anomalies, including vertebral artery anomaly, thin C2 pedicle, vertical atlantoaxial facet joint, or rotational dislocation combined with atlantoaxial dislocation and basilar invagination. Preoperative planning, surgical simulation, and intraoperative reference were achieved using the 3D model during the surgical treatment. The usefulness of 3D printed models, and postoperative clinical and radiological outcomes were assessed. Direct posterior reduction and atlantoaxial fixation were achieved in 19 patients. Transoral odontoidectomy followed by posterior fixation was implemented for 2 patients with vertical facet joint and rotational dislocation. All screws were safely inserted with no complication, and 90% patients achieved a >60% reduction of both horizontal and vertical dislocation. Clinical symptoms improved in all patients, with the averaged Japanese Orthopedic Association scores increasing from 11.14 to 14.43 (P < 0.01). The patient-specific 3D printed model would be an effective tool for evaluation of the reducibility of the atlantoaxial dislocation and basilar invagination, decision making in choosing the optimal surgical approach and way of fixation, and precise placement of the screw while protecting the vertebral artery and spinal cord. The risk of neurovascular injury was minimized, and encouraging outcomes were achieved with the aid of this technique. [ABSTRACT FROM AUTHOR]

The occipitalization of the atlas (OA) is always associated with multiplanar dislocation and olisthy of the C1 over C2 facets, which may change the anatomical relationship between the internal carotid artery (ICA) and the atlas. The purpose of this current study is to identify the location of the ICA relative to the anterior aspect of the atlas in patients with OA and define the clinical implications for screw placement. We retrospectively reviewed the computed tomography angiography data of 86 patients with OA and 86 control subjects. Several parameters were also measured to quantitatively evaluate the mutual relationship. In the OA group, 25.6% of ICAs were located in area 3 and 74.4% in area 2, whereas the percentages were 57.4% and 42.6%, respectively, in the control group. There were 73 (42.4%) ICAs in which the shortest distance between the dorsal surface of the ICA and the ventral cortex of the atlas was less than 4 mm in the OA group and only 50 (29.1%) in the control group. The ideal angulation of C1 screw trajectory was about 5 degrees more medial in the OA group than that in the control group (P < 0.01). The risk of ICA injury is much higher in OA patients than in non-OA patients during the C1 screw placement. A mean medial angulation about 20 degrees will permit a long and safe screw purchase, but should be individualized. We recommend careful preoperative computed tomography angiography evaluation in all patients before surgery. [ABSTRACT FROM AUTHOR]

Occipitalization of the atlas (OA) often is associated with atlantoaxial dislocation and basilar invagination. The purpose of this study is to determine the biomechanical difference between normal and OA conditions in the craniovertebral junction and to further explore the rationale for development of atlantoaxial dislocation and basilar invagination using the finite element model (FEM). A ligamentous, nonlinear, sliding-contact, 3-dimensional FEM of the occipitoatlantoaxial complex was generated. Validation of the model was accomplished by comparing kinematic predictions with experimental data. We defined the atlantooccipital joint as a tie contact to simulate the OA deformity. The range of motion and the value of the maximum Von Mises stress were compared between the intact and OA models. We found all of the predicted data in the intact FEM fell within 1 standard deviation of the cadaver data for all 6 loadings. The OA simulation significantly reduced the overall range of motion of the occipitoatlantoaxial complex at all loadings. The maximum Von Mises stress was predicted to increase at the transverse ligament and the superior articular facet of the axis for all the flexion, extension, lateral bending, and axial rotation loadings. The OA could result in hypermobility of the atlantoaxial segment and cause overstress in the transverse ligament and the lateral atlantoaxial joints. These changes explain the pathogenesis of atlantoaxial dislocation and basilar invagination associated with OA. Follow-up should be scheduled regularly due to the nature of the dynamic development of atlantoaxial dislocation and basilar invagination. [ABSTRACT FROM AUTHOR]

To investigate the biomechanical effect of C1 lateral mass-C2 pedicle screw-rod (C1LM-C2PS) fixation with and without transverse connectors (TC) in an atlantoaxial instability (AAI) model. Ten freshly frozen cadaveric specimens were tested using an industrial robot under the following conditions: intact model, AAI model, C1-C2 model, C1-C2 with one TC model, and C1-C2 with two TCs model. Three types of motion, flexion-extension (FE), lateral bending (LB), and axial rotation (AR), were applied (1.5 Nm) to the specimens. The range of motion (ROM) and neutral zone (NZ) between C1 and C2 in all directions were measured. Compared with those of the intact and AAI models, the C1-C2 ROM and NZ of all instrumented groups were decreased significantly in each direction of loading motion (P < 0.05). The mean FE ROM in the no TC, 1 TC, and 2 TC groups was 2.12° ± 0.41°, 2.29° ± 0.42°, and 2.04° ± 0.69°, respectively (P = 0.840, 0.981, 0.628, respectively); the mean LB ROM in the 3 intervention groups was 1.26° ± 0.67°, 1.02° ± 0.51° and 1.03° ± 0.57°, respectively (P = 0.489, 0.501, 1.000, respectively). During AR, the ROM and NZ of the no TC group (3.19° ± 0.89° and 1.51° ± 0.42°) were significantly reduced by more than 60% compared with those in the 1 (0.98° ± 0.28° and 0.40° ± 0.11°) and 2 TC groups (1.17° ± 1.69° and 0.42° ± 0.61°) (P < 0.001). Two TCs were equivalent for all loading motions to 1 TC (P > 0.05). Adding TCs to C1LM-C2PS can effectively decrease the axial rotation ROM and enhance the stability of C1-C2 segment. Therefore, it is necessary to use TC-strengthened C1 lateral mass -C2 pedicle screw-rod fixation in patients with instability of C1-C2. [ABSTRACT FROM AUTHOR]