Search

Aiming at the frost heave characteristics of long-distance and large-section underground freezing projects in cities, the double-line tunnel of Shanghai Metro Line 18 undercrossing an operation station was select as an example,a three-dimensional numerical model was established by using finite element software based on the thermal-mechanical coupling equation. Combined with the physical parameters obtained from laboratory tests, the evolution law of frost heave displacement field of the project was studied, and the influence of measures such as the staggered peak freezing and the adjustment of brine temperature on the frost heave displacement field was explored. Under the experimental conditions, the results show that: ① the deformation of the station floor caused by frost heave which mainly occurs in the active freezing period. When the double-line tunnel is frozen at the same time, the vertical displacement of the station floor at 45days of freezing reaches 77.72% of the displacement at 90 days of freezing. ② When the freezing time reaches 90 days, compared with simultaneous freezing, the displacement of the station floor reduced by 7.7% under the condtion of staggered peak freezing. The superposition effect of frost heave in the same time period is effectively avoided, and the frost heave effect is reduced to a certain extent. ③ When the freezing time reaches 90 days, compared with simultaneous freezing, the displacement of the station floor reduced by 34.2% under the condtion of adjusting the brine temperature, it shown that the expansion rate and frost heave effect of frozen soil are effectively controlled. In engineering practice, measures such as staggered freezing and adjusting brine temperature are used together to control frost heave, and the maximum vertical deformation of the station floor is 25.41 mm. The deformation law of the station floor obtained by numerical simulation is basically consistent with the measured data, which effectively guided the construction of the project.

Purposes Owing to the varietry of electrical equipment and the complex connection between them in transformer station, there are many common problems includeng relatively limited location and picture contrast of equipment, insufficient target images and markers in practical applications, and inaccurate electrical equipment image segmentation brought by the traditional way. In this paper, CNN (Convolutional Neural Network) is combined with Transformer to form a new model for segmentation of electrical equipment, and a new SE-Transfomer (Substation Equipment Transformer) network based on codec structure is proposed. Methods To obtain the local context information, the coder extracts the spatial feature map by using CNN at first. Meanwhile, the feature map is carefully modified with multi-scale feature inputs for global feature modeling. The decoder extracts global deep features using Transformer and performs stepwise up-sampling to predict the detailed segmentation map. SE-Transfomer is extensively experimented on the dataset of Liangjiazhuang Transformer Station in Shanxi province, and its longitudinal results of Dice, Recall, Specificity, and RMSE (Root Mean Square Error) are 89.31%, 90.52%, 89.62%, and 11.32, respectively. Findings The results indicate that SE-Transfomer obtains comparable or higher results than previous state-of-the-art segmentation methods on the scanning of electrical equipment in the transformer station.

The paper comprehensively summarizes the process of China's coal mine construction technology from introduction and absorption to independent development since the founding of New China more than 70 years ago, as well as the important achievements in basic research, process innovation, technological breakthrough, equipment development and achievement transformation, involving drilling and blasting method, freezing method, grouting method, drilling method, caisson method and other drilling technology as well as coal mine rock tunneling technology. At present, the mechanization and automation level of drilling and blasting equipment mainly for drilling and blasting rock has been significantly improved, and the comprehensive drilling technology for short-segment excavation of kilometer-level deep wells has been mature, and the maximum depth of vertical shaft drilling has reached 1341.6 m.The level of geological support technology for drilling and tunneling such as freezing method and grouting method has been significantly improved, gradually replacing the curtain method, sheet pile method and dewatering method and other drilling technology. The maximum frozen depth of vertical shaft is 990 m, and the maximum frozen section of inclined shaft is 681 m. The longest inclined shaft of 5875 m is built by working face grouting, and the ground pre-grouting reinforcement depth is 1355 m.Breakthroughs have been made in the technology of mechanical rock breaking and tunneling. The maximum drilling diameter of reverse drilling rig is 6 m, and the maximum drilling depth is 562 m.The maximum drilling diameter of vertical drilling rig is 10.8 m, and the maximum drilling depth is 660 m, and the application range is gradually expanded. The drilling method of vertical tunneling machine has achieved a breakthrough of zero, which has laid a foundation for intelligent drilling of coal mine vertical shaft. The operation line of the mechanized excavation method of the rock tunnel has been formed, and the average tunneling speed of the full section tunneling machine is more than 400 m/month. In summary, the innovation and development of coal in China mine construction technology and equipment in the past 70 years has significantly improved the operation environment, construction efficiency and safety level of the coal mine tunneling, realized the unmanned and fully mechanized operation of the tunneling working face, solved the problems of the tunnel construction in each stage of coal development in China, and ensured the basic construction and mining continuous construction of coal mines. At the same time, the technical equipment developed from the coal mine construction and the successful experience have been promoted and practiced in the underground engineering fields such as hydraulic power generation, municipal rail transit, mountain traffic tunnels, water diversion tunnels, and made contributions to the construction of national key projects and the development of national economy.

A multiplex real-time polymerase chain reaction (PCR) method for simultaneous and rapid detection of components derived from sweet potato, cassava, potato, and corn was established. The g3pdhs gene of sweet potato and cassava, the UGPase gene of potato and the zSSIIb gene of corn were used as target genes to design specific primers and TaqMan probe, and the 18S rRNA gene was used as the internal reference gene. Methodological validation was performed, and the proposed method was applied to simulated samples with different mixing ratios and actual starch samples. The results showed that this method was high-throughput, sensitive and specific. No cross-reaction was found with 15 non-target sources. The detection sensitivity for template DNA was 3 × 10-3 ng/μL, and the proposed method had a good linear relationship and high amplification efficiency. The detection limit for edible starch samples was 0.1%. The results of the PCR method for 50 actual samples were consistent with those of the reference method, indicating that this method could be used for the detection of common adulterants in edible starches.

为提高虾青素的生物利用度，增加其稳定性，采用均质乳化-探头超声法制备虾青素纳米脂质载体（AST-NLC）。以粒径和包封率为指标，通过单因素试验和中心复合设计法优化AST-NLC的制备工艺，并对制备的AST-NLC进行X射线衍射（XRD）和傅里叶红外光谱（FT-IR）结构表征，以及4、25、50 ℃下的热稳定性测试。结果表明:制备AST-NLC的最佳工艺条件为甘油三硬脂酸酯与中链甘油三酯质量比1∶ 11（总质量0.99 g）、乳化剂用量（吐温-80+大豆卵磷脂，质量比1∶ 1）3.8%（以水相质量为基准）、油水比1∶ 34（体积比）、均质速度5 000 r/min、超声时间2 min、虾青素添加量2.0 mg，在此条件下制备的AST- NLC粒径为（79.30±1.21）nm，多分散系数（PDI）为0.01±0.01，包封率为（81.36±1.84）%，Zeta电位为（-18.13±2.83）mV；结构表征结果表明，AST-NLC中的虾青素是以分子的状态包裹在脂质体中；热稳定性结果显示，4 ℃更有利于AST-NLC的保存。综上，成功制备了粒径小、分散均匀且包封率较高的AST-NLC。In order to improve the bioavailability and increase the stability of astaxanthin, astaxanthin nanolipid carrier (AST-NLC) was prepared by the homogeneous emulsification-probe ultrasonic method. The preparation process of AST-NLC was optimized by single factor experiment and central composite design method with particle size and encapsulation rate as indexes, and the AST-NLC prepared was structurally characterized by X-ray diffraction (XRD) and Fourier infrared spectroscopy(FT-IR) and tested for thermal stability at 4, 25 ℃ and 50 ℃. The results showed that the optimal process conditions for preparing AST-NLC were mass ratio of glycerol tristearate to medium chain triglyceride 1∶ 11 (total mass 0.99 g), emulsifier dosage (Tween-80+soybean lecithin, mass ratio 1∶ 1)3.8%(based on water phase mass), oil-water volume ratio 1∶ 34, homogeneous speed 5 000 r/min, ultrasonic time 2 min, astaxanthin dosage 2.0 mg. Under the optimal conditions, the AST-NLC was prepared with a particle size of (79.30±1.21) nm, a polymer dispersity index(PDI) of 0.01±0.01, an encapsulation rate of (81.36±1.84)%, and Zeta potential（-18.13±2.83）mV. The structural analysis revealed that astaxanthin in AST-NLC was encapsulated in liposomes in the state of molecules. The thermal stability results showed 4 ℃ was more favorable for the preservation of AST-NLC. In conclusion, AST-NLC with small particle size, homogenous dispersion and high encapsulation rate was successfully prepared.

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Tourism Tribune / Lvyou Xuekan is the property of Tourism Institute of Beijing Union University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Harbour Engineering is the property of Editorial Office of China Harbour Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Environmental Science & Technology (10036504) is the property of Editorial Board of Environmental Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natural Gas Industry is the property of Natural Gas Industry Journal Agency and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Inorganic Chemicals Industry is the property of Editorial Office of Inorganic Chemicals Industry and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of South Architecture / Nanfang Jianzhu is the property of South Architecture Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Mechanical & Electrical Engineering is the property of Mechanical & Electrical Engineering Magazine and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Railway Science & Engineering is the property of Journal of Railway Science & Engineering Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natural Gas Industry is the property of Natural Gas Industry Journal Agency and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natural Gas Industry is the property of Natural Gas Industry Journal Agency and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natural Gas Industry is the property of Natural Gas Industry Journal Agency and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natural Gas Industry is the property of Natural Gas Industry Journal Agency and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Zhejiang Electric Power is the property of Zhejiang Electric Power Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Science Technology & Engineering is the property of Chinese Society of Technology Economics and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Coal Geology & Exploration is the property of Xian Research Institute of China Coal Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Harbour Engineering is the property of Editorial Office of China Harbour Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Railway Science & Engineering is the property of Journal of Railway Science & Engineering Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Modern Food Science & Technology is the property of Editorial Office of Modern Food Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In order to study the effect of biomass charcoal material on nitrogen and phosphorus retention and copper stabilization in river sediment, water hyacinth was used as raw material to prepare the biomass biochar(MgO@BC) by one-step impregnation-roasting method. The prepared biochar (MgO@BC) was added to polluted river sediments at the proportions of 0% (CK), 0.1%, 1%, and 2% as the stabilization material. The effects of MgO@BC on the physicochemical properties, nitrogen and phosphorus retention, copper leaching toxicity (TCLP) and morphological distribution of the contaminated sediment were investigated by the stabilization test. The results showed that after 75 d of stabilization treatment, the pH, electrical conductivity (EC), and organic matter (SOM) of the sediment were increased and the cation exchange capacity (CEC) was slightly decreased. Compared with the CK group, the addition of magnesium-based biomass charcoal (MgO@BC) had a significant retention effect on the effective phosphorus in the river sediment, and the ammonia and nitrogen content in the sediment was reduced to the appropriate range. The additions of 1% and 2% of MgO@BC can reduce the TCLP-Cu content by 9.54% and 26.98%, respectively, and the proportion of the stabilized form of Cu (F3+F4) was slightly increased. It showed that MgO@BC can be used as a good heavy metal stabilization material in the field of river sediment remediation. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Ground Improvement is the property of Journal of Ground Improvement Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Science Technology & Engineering is the property of Chinese Society of Technology Economics and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Food Research & Development is the property of Food Research & Development Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of University Chemistry is the property of Peking University, College of Chemistry & Molecular Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Mine Automation is the property of Industry & Mine Automation Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Arid Zone Research / Ganhanqu Yanjiu is the property of Arid Zone Research Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of South China University of Technology (Natural Science Edition) is the property of South China University of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)