Search

The application of a photovoltaic (PV) system for zero energy buildings is crucial to balance energy consumption. This paper investigated the potential of PV systems for buildings in different climate zones of China. The tilt angle, orientation, plot ratio, PV conversion efficiency and location were selected to study their influences on electricity production. The performance of the PV system was analyzed based on a residential building, and employed RETScreen in combination with TRNSYS. The results indicate that southwest China is the best place to develop zero energy buildings. Low-rise residential buildings can realize zero energy in China when the PV conversion efficiency is higher than 20%. However, an energy balance only occurs in the southwest when the PV conversion efficiency is 10%. For different building heights, with a high conversion efficiency (20%), the energy consumptions rates are less than 15 kW h/m2a all over China. In the southeast, the effect of the building shape on energy generation can be ignored due to the high solar elevation angle in the summer. Although the optimal tilt angle varies for different cities, the energy deviations are less than 10% when tilt angle is within 10° of the optimal angle. This study proposed a formula to evaluate the potential of a building PV system. The maximum difference between the simulated and calculated results is approximately 10%, which is reasonable and acceptable. This paper provides some references for the application of PV systems in zero energy buildings. [ABSTRACT FROM AUTHOR]

The objective of this paper is to optimize the passive design of newly-built residential buildings in hot summer and cold winter region of China for improving indoor thermal comfort while reducing building energy demand. In this respect, this paper investigates the performance of a representative apartment building in the city of Shanghai and evaluates the optimum solutions by using a developed optimization approach, which includes three major steps of 1) setting the model for multi-objective optimization, 2) sensitivity analysis for reducing the dimension of input variables, and 3) multi-objective optimization by using the Non-dominated Sorting Genetic Algorithm II (NSGA-II) coupled with the Artificial Neural Network (ANN), among which a novel indicator for evaluating the annual indoor thermal comfort of residential buildings of Shanghai named Comfort Time Ratio (CTR) is defined based on the modification of Szokolay’s theory in terms of bioclimatic analysis, and the impacts of passive design variables on the indoor thermal comfort and building energy demand in terms of different directions are comprehensively investigated. Results of the multi-objective optimization indicate that the residential buildings of Shanghai have a great potential in comfort-improvement and energy-saving. A series of novel optimal passive design tactics for residential buildings in Shanghai are derived accordingly which could be easily understood and conveniently carried out by the architects in practice. [ABSTRACT FROM AUTHOR]

Demand for electricity in China kept accelerating in recent years; moreover, there exist serious mismatches among the distribution of power demand, energy resources, and power generation infrastructure across different regions in China, both of which indicate a necessity of a holistic and integrated approach to the strategic planning and development of its power industry. Material benefits could be realized by ensuring that the long term development of the power system is optimized by taking into consideration the different regional dynamics and characteristics. This paper proposes a multi-region optimization model that can deliver insights into how planning of the long term development of China’s power sector could minimize the total cost of China’s power sector by considering regional variations in availabilities of resources and inter-region power transmission line capacity. A case study considered how investment decisions to expand and alter the existing generation mix could be optimized across a timeframe from 2011 to 2050. By comparing results between single and multi-region optimizations, it was possible to show the likely impact on how investment decisions would differ when regional differences were taken into account. The multi-region optimization arguably better reflects and considers conditions and challenges in the real world. [ABSTRACT FROM AUTHOR]

Abstract: Current energy designs for a building in China focus on the energy efficiency of the whole building and thus often neglect the energy difference between different housing units in apartment buildings. The best design technique in terms of energy savings is not only to decrease whole building energy demand, but also to reduce the energy difference between different housing units to a relatively low level. This paper introduces an important index “energy performance difference between housing units” (EDH) to evaluate the drawbacks of conventional designs on a typical residential building in hot summer and cold winter zone. Then nine improved design options were considered as the possible strategies to diminish the EDH, based on a number of building simulations with the program DeST-h. Results show that the option 9 (add movable shading for the east facing windows and west facing windows, and reduce the U-values of the east walls and west facing windows), an improved design strategy according to the EDH of the current design, reduces the EDH to less than 4% that is much lower than other options and meanwhile ensures a decrease in whole building energy demands. A case study was carried out to validate the effectiveness of this index in optimization. As a conclusion, EDH is a very useful index for optimizing energy designs of apartment buildings and can be used in China to improve conventional building designs. [Copyright &y& Elsevier]

Abstract: Along with high-speed economic development and increasing energy consumption, the Chinese Government faces a growing pressure to maintain the balance between energy supply and demand. In 2009, China has become both the largest energy consumer and CO2 emitting country in the world. In this case, the inappropriate energy consumption structure should be changed. As an alternative, a suitable infrastructure for the implementation of renewable energy may serve as a long-term sustainable solution. The perspective of a 100% renewable energy system has been analyzed and discussed in some countries previously. In this process, assessment of domestic renewable energy sources is the first step. Then appropriate methodologies are needed to perform energy system analyses involving the integration of more sustainable strategies. Denmark may serve as an example of how sustainable strategies can be implemented. The Danish system has demonstrated the possibility of converting into a 100% renewable energy system. This paper discusses the perspective of renewable energy in China firstly, and then analyses whether it is suitable to adopt similar methodologies applied in other countries as China approaches a renewable energy system. The conclusion is that China’s domestic renewable energy sources are abundant and show the possibility to cover future energy demand; the methodologies used to analyse a 100% renewable energy system are applicable in China. Therefore, proposing an analysis of a 100% renewable energy system in China is not unreasonable. [ABSTRACT FROM AUTHOR]