Search

An improved lossless compression method with adaptive band reordering and minimum mean square error prediction was proposed to address the problems of huge data volume of remote sensing images, great pressure on transmission and storage and a low compression ratio. This method may determine the optimal band ordering adaptively, and make full use of the ordering correlation to eliminate the image redundancy according to the minimum mean square error criterion. First, it adaptively grouped hyperspectral image bands, and used the minimum spanning tree algorithm for band ordering within each group to enhance the inter-spectral correlation of adjacent bands. Later, it selected the contexts for inter- and intra-spectral prediction adaptively for the bands within the group to remove the redundancy of hyperspectral images. Finally, it conducted binary arithmetic coding of the predicted residuals to remove the statistical redundancy, and complete the lossless compression of hyperspectral images. The test results based on the hyperspectral images of ZY1-02D show that the method in this paper effectively utilizes the intra- and inter-spectral correlations, improves the prediction performance, and outperforms the commonly used compression methods. [ABSTRACT FROM AUTHOR]

In many digital systems, various sequential blocks are used. This paper is devoted to the case where the model of a Mealy finite state machine (FSM) represents the behaviour of a sequential block. The chip area occupied by an FSM circuit is one of the most important characteristics used in logic synthesis. In this paper, a method is proposed which aims at reducing LUT counts for FPGA-based Mealy FSMs with transformation of state codes into FSM outputs. This is done using the combined state codes. Such an approach allows excluding a block of transformation of binary state codes into extended state codes. The proposed method leads to LUT-based Mealy FSM circuits having exactly three levels of logic blocks. Under certain conditions, each function for any logic level is represented by a circuit including a single LUT. The proposed approach is illustrated with an example of synthesis. The results of experiments conducted using standard benchmarks show that the proposed method produces LUT-based FSM circuits with significantly smaller LUT counts than is the case for circuits produced by other investigated methods (Auto and One-hot of Vivado, JEDI, and transformation of binary codes into extended state codes). The LUT count is decreased by an average of 17.96 to 91.8%. Moreover, if some conditions are met, the decrease in the LUT count is accompanied with a slight improvement in the operating frequency compared with circuits based on extended state codes. The advantages of the proposed method multiply with increasing the numbers of FSM inputs and states. [ABSTRACT FROM AUTHOR]

In visual indoor positioning systems, the method of constructing a visual map by point-by-point sampling is widely used due to its characteristics of clear static images and simple coordinate calculation. However, too small a sampling interval will cause image redundancy, while too large a sampling interval will lead to the absence of any scene images, which will result in worse positioning efficiency and inferior positioning accuracy. As a result, this paper proposed a visual map construction method based on pre-sampled image features matching, according to the epipolar geometry of adjacent position images, to determine the optimal sampling spacing within the constraints and effectively control the database size while ensuring the integrity of the image information. In addition, in order to realize the rapid retrieval of the visual map and reduce the positioning error caused by the time overhead, an image retrieval method based on deep hashing was also designed in this paper. This method used a convolutional neural network to extract image features to construct the semantic similarity structure to guide the generation of hash code. Based on the log-cosh function, this paper proposed a loss function whose function curve was smooth and not affected by outliers, and then integrated it into the deep network to optimize parameters, for fast and accurate image retrieval. Experiments on the FLICKR25K dataset and the visual map proved that the method proposed in this paper could achieve sub-second image retrieval with guaranteed accuracy, thereby demonstrating its promising performance. [ABSTRACT FROM AUTHOR]

To enhance the reliability of UAV-to-Ground data transmission in SC-FDE, this study proposes a combined MMSE equalization and LDPC-RS concatenated code approach, utilizing source redundancy to mitigate errors in low-elevation G2A communication. The proposed coding scheme combines a binary LDPC code as the outer code and an improved RS code as the inner code, resulting in improved resistance to burst and random errors. To address the coding aspect, this paper designs a coding table using RS coding as the underlying logic, enabling efficient coding. For decoding, a decoding scheme based on the minimum Euclidean distance criterion is devised, enabling high-performance decoding. Simulation results demonstrate that the proposed LDPC-RS concatenated coding scheme significantly enhances the performance of the communication system, thereby offering considerable potential for application in UAV video transmission systems. [ABSTRACT FROM AUTHOR]

This paper aims to revisit a construction found in some Spanish varieties which refers to a set constituted by a singular referent and an annex introduced by the item con 'with': PRO(noun)[PL] with-DP. This construction triggers plural agreement and can be doubled by a plural pronoun, indicating that the annex is included in the set to which verbal agreement and the plural pronoun refer. For example, Nosotros con Juan viajamos ayer (literally, 'We with Juan travelled.1PL yesterday') means 'Juan and I travelled yesterday'. We explore the Spanish PRO[PL] with-DP, taking into account its discursive properties together with the syntactic requirements involved in the agreement patterns. In fact, although the two individuals denoted by this construction are involved as equal participants in the event, they have a different discursive status: one of them introduces new information, while the other refers to the immediate communicative situation. If some notions regarding information structure can be coded by binary features such as [+/−anaphor] and [+/−contrast], it is possible to find plurality triggered by the opposite combination of features within the same syntactic object. PRO[PL] with-DP is a possibility that the lexicons of some languages offer. [ABSTRACT FROM AUTHOR]

The number-theoretic code is a class of codes defined by single or multiple congruences. These codes are mainly used for correcting insertion and deletion errors, and for correcting asymmetric errors. This paper presents a formula for a generalization of the complete weight enumerator for the number-theoretic codes. This formula allows us to derive the weight enumerators and cardinalities for the number-theoretic codes. As a special case, this paper provides the Hamming weight enumerators and cardinalities of the non-binary Tenengolts’ codes, correcting single insertion or deletion. Moreover, we show that the formula deduces the MacWilliams identity for the linear codes over the ring of integers modulo $r$. [ABSTRACT FROM AUTHOR]

Reversible codes have a range of wide applications in cryptography, data storage, and communication systems. In this paper, we investigated reversible codes under the Rosenbloom-Tsfasman metric (RT-metric). First, some properties of reversible codes in the RT-metric were described. An essential condition for a reversible code to be a maximum distance separable code (MDS code, in short) in the RT-metric was established. A necessary condition for a binary self-dual code to be reversible was proven and the same was generalized for q-ary self-dual reversible codes. Several constructions for reversible RT-metric codes were provided in terms of their generator matrices. [ABSTRACT FROM AUTHOR]

Motivated by the sequence reconstruction problem initiated by Levenshtein, reconstruction codes were introduced by Cai et al. to combat errors when a fixed number of noisy channels are available. The central problem on this topic is to design codes with sizes as large as possible, such that every codeword can be uniquely reconstructed from any N distinct noisy reads, where N is fixed. In this paper, we study binary reconstruction codes with the constraint that every codeword is balanced, which is a fundamental requirement in the technique of DNA-based storage. For all possible channels with a single edit error and their variants, we design asymptotically optimal balanced reconstruction codes for all N, and show that the number of their redundant symbols decreases from 3 2 log 2 n + O (1) to 1 2 log 2 n + log 2 log 2 n + O (1) , and finally to 1 2 log 2 n + O (1) but with different speeds, where n is the length of the code. Compared with the unbalanced case, our results imply that the balanced property does not reduce the rate of the reconstruction code in the corresponding codebook. [ABSTRACT FROM AUTHOR]

In this paper, we first consider the existence conditions, the construction and the enumeration of Hermitian self-dual θ -cyclic and θ -negacyclic codes over I F p 2 , where p is a prime number and θ is the Frobenius automorphism over I F p 2 . We then give necessary and sufficient conditions for the existence of Hermitian self-dual θ -cyclic and θ -negacyclic codes over I F p e where e is an even integer greater than 2. [ABSTRACT FROM AUTHOR]

In recent years, with the development of the Internet, the attribution classification of APT malware remains an important issue in society. Existing methods have yet to consider the DLL link library and hidden file address during the execution process, and there are shortcomings in capturing the local and global correlation of event behaviors. Compared to the structural features of binary code, opcode features reflect the runtime instructions and do not consider the issue of multiple reuse of local operation behaviors within the same APT organization. Obfuscation techniques more easily influence attribution classification based on single features. To address the above issues, (1) an event behavior graph based on API instructions and related operations is constructed to capture the execution traces on the host using the GNNs model. (2) ImageCNTM captures the local spatial correlation and continuous long-term dependency of opcode images. (3) The word frequency and behavior features are concatenated and fused, proposing a multi-feature, multi-input deep learning model. We collected a publicly available dataset of APT malware to evaluate our method. The attribution classification results of the model based on a single feature reached 89.24% and 91.91%. Finally, compared to single-feature classifiers, the multi-feature fusion model achieves better classification performance. [ABSTRACT FROM AUTHOR]

Binary code similarity detection plays a crucial role in various applications within binary security, including vulnerability detection, malicious software analysis, etc. However, existing methods suffer from limited differentiation in binary embedding representations across different compilation environments, lacking dynamic high-level semantics. Moreover, current approaches often neglect multi-level semantic feature extraction, thereby failing to acquire precise semantic information about the binary code. To address these limitations, this paper introduces a novel detection solution called BinBcla. This method employs an enhanced pre-training model to generate instruction embeddings with dynamic semantics for binary functions. Subsequently, multi-feature fusion technique is utilized to extract local semantic information and long-distance global features from the code, respectively, employing self-attention to comprehend the structure information of the code. Finally, an improved cosine similarity method is employed to learn relationships among all elements of the distance vectors, thereby enhancing the model's robustness to new sample functions. Experiments are conducted across different architectures, compilers, and optimization levels. The results indicate that BinBcla achieves higher accuracy, precision and F1 score compared to existing methods. [ABSTRACT FROM AUTHOR]

Linear codes play a crucial role in various fields of engineering and mathematics, including data storage, communication, cryptography, and combinatorics. Minimal linear codes, a subset of linear codes, are particularly essential for designing effective secret sharing schemes. In this paper, we introduce several classes of minimal binary linear codes by carefully selecting appropriate Boolean functions. These functions belong to a renowned class of Boolean functions, namely, the general Maiorana–McFarland class. We employ a method first proposed by Ding et al. (IEEE Trans Inf Theory 64(10):6536–6545, 2018) to construct minimal codes violating the Ashikhmin–Barg bound (wide minimal codes) by using Krawtchouk polynomials. The lengths, dimensions, and weight distributions of the obtained codes are determined using the Walsh spectrum distribution of the chosen Boolean functions. Our findings demonstrate that a vast majority of the newly constructed codes are wide minimal. Furthermore, our proposed codes exhibit a significantly larger minimum distance, in some cases, compared to some existing similar constructions. Finally, we address this method, based on Krawtchouk polynomials, more generally, and highlight certain generic properties related to it. These general results offer insights into the scope of this approach. [ABSTRACT FROM AUTHOR]

Product reviews provide crucial information for both consumers and businesses, offering insights needed before purchasing a product or service. However, existing sentiment analysis methods, especially for Chinese language, struggle to effectively capture contextual information due to the complex semantics, multiple sentiment polarities, and long-term dependencies between words. In this paper, we propose a sentiment classification method based on the BiLSTM algorithm to address these challenges in natural language processing. Self-Attention-CNN BiLSTM (SAC-BiLSTM) leverages dual channels to extract features from both character-level embeddings and word-level embeddings. It combines BiLSTM and Self-Attention mechanisms for feature extraction and weight allocation, aiming to overcome the limitations in mining contextual information. Experiments were conducted on the onlineshopping10cats dataset, which is a standard corpus of e-commerce shopping reviews available in the ChineseNlpCorpus 2018. The experimental results demonstrate the effectiveness of our proposed algorithm, with Recall, Precision, and F1 scores reaching 0.9409, 0.9369, and 0.9404, respectively. [ABSTRACT FROM AUTHOR]

Viruses are one of the main threats to the security of today's cyberspace. With the continuous development of virus and artificial intelligence technologies in recent years, the intelligentization of virus technology has become a trend. It is of urgent significance to study and combat intelligent viruses. In this paper, we design a new type of confirmatory virus from the attacker's perspective that can intelligently infect software frameworks. We aim for structural software as the target and use BCSD (binary code similarity detection) to identify the framework. By incorporating a software framework functional structure recognition model in the virus, the virus is enabled to intelligently recognize software framework functions in executable files. This paper evaluates the BCSD model that is suitable for a virus to carry and constructs a lightweight BCSD model with a knowledge distillation technique. This research proposes a software framework functional structure recognition algorithm, which effectively reduces the recognition precision's dependence on the BCSD model. Finally, this study discusses the next researching direction of intelligent viruses. This paper aims to provide a reference for the research of detection technology for possible intelligent viruses. Consequently, focused and effective defense strategies could be proposed and the technical system of malware detection could be reinforced. [ABSTRACT FROM AUTHOR]

Infrared small target detection (IRSTD) is crucial for applications in security surveillance, unmanned aerial vehicle identification, military reconnaissance, and other fields. However, small targets often suffer from resolution limitations, background complexity, etc., in infrared images, which poses a great challenge to IRSTD, especially due to the noise interference and the presence of tiny, low-luminance targets. In this paper, we propose a novel dual enhancement network (DENet) to suppress background noise and enhance dim small targets. Specifically, to address the problem of complex backgrounds in infrared images, we have designed the residual sparse enhancement (RSE) module, which sparsely propagates a number of representative pixels between any adjacent feature pyramid layers instead of a simple summation. To handle the problem of infrared targets being extremely dim and small, we have developed a spatial attention enhancement (SAE) module to adaptively enhance and highlight the features of dim small targets. In addition, we evaluated the effectiveness of the modules in the DENet model through ablation experiments. Extensive experiments on three public infrared datasets demonstrated that our approach can greatly enhance dim small targets, where the average values of intersection over union ( I o U ), probability of detection ( P d ), and false alarm rate ( F a ) reached up to 77.33%, 97.30%, and 9.299%, demonstrating a performance superior to the state-of-the-art IRSTD method. [ABSTRACT FROM AUTHOR]

In 2018, J. M. Gómez et al. showed that the problem of finding the packing number ρ(F2(Pn)) of the 2-token graph F2(Pn) of the path Pn of length n ≥ 2 is equivalent to determining the maximum size of a binary code S' of constant weight w = 2 that can correct a single adjacent transposition. By determining the exact value of ρ(F2(Pn)), they proved a conjecture of Rob Pratt. In this paper, we study a related problem, which consists of determining the packing number ρ(F3(Pn)) of the graph F3(Pn). This problem corresponds to the Sloane's problem of finding the maximum size of S' of constant weight w = 3 that can correct a single adjacent transposition. Since the maximum packing set problem is computationally equivalent to the maximum independent set problem, which is an NP-hard problem, then no polynomial time algorithms are expected to be found. Nevertheless, we compute the exact value of ρ(F3(Pn)) for n ≤ 12, and we also present some algorithms that produce a lower bound for ρ(F3(Pn)) with 13 ≤ n ≤ 44. Finally, we establish an upper bound for ρ(F3(Pn)) with n ≥ 13. [ABSTRACT FROM AUTHOR]

In this paper, we introduced double cyclic codes over Rr × Rs, where R = Z2 + uZ2 = {0, 1, u, 1 + u} is the ring with four elements and u² = 0. We first determined the generator polynomials of R-double cyclic codes for odd integers r and s, then gave the generators of duals of free double cyclic codes over Rr × Rs. By defining a linear Gray map, we looked at the binary images of R-double cyclic codes and gave several examples of optimal parameter binary linear codes obtained from R-double cyclic codes. Moreover, we studied self-dual R-double cyclic codes and presented an example of a self-dual R-double cyclic code. [ABSTRACT FROM AUTHOR]

The exponential growth of data raises an unprecedented challenge in data analysis: how to retrieve interesting information from such large-scale data. Hash learning is a promising solution to address this challenge, because it may bring many potential advantages, such as extremely high efficiency and low storage cost, after projecting high-dimensional data to compact binary codes. However, traditional hash learning algorithms often suffer from the problem of semantic inconsistency, where images with similar semantic features may have different binary codes. In this paper, we propose a novel end-to-end deep hashing method based on the similarities of binary codes, dubbed CSDH (Code Similarity-based Deep Hashing), for image retrieval. Specifically, it extracts deep features from images to capture semantic information using a pre-trained deep convolutional neural network. Additionally, a hidden and fully connected layer is attached at the end of the deep network to derive hash bits by virtue of an activation function. To preserve the semantic consistency of images, a loss function has been introduced. It takes the label similarities, as well as the Hamming embedding distances, into consideration. By doing so, CSDH can learn more compact and powerful hash codes, which not only can preserve semantic similarity but also have small Hamming distances between similar images. To verify the effectiveness of CSDH, we evaluate CSDH on two public benchmark image collections, i.e., CIFAR-10 and NUS-WIDE, with five classic shallow hashing models and six popular deep hashing ones. The experimental results show that CSDH can achieve competitive performance to the popular deep hashing algorithms. [ABSTRACT FROM AUTHOR]

The study of linear codes over local rings, particularly non-chain rings, imposes difficulties that differ from those encountered in codes over chain rings, and this stems from the fact that local non-chain rings are not principal ideal rings. In this paper, we present and successfully establish a new approach for linear codes of any finite length over local rings that are not necessarily chains. The main focus of this study is to produce generating characters, MacWilliams identities and generator matrices for codes over singleton local Frobenius rings of order 32. To do so, we first start by characterizing all singleton local rings of order 32 up to isomorphism. These rings happen to have strong connections to linear binary codes and Z 4 codes, which play a significant role in coding theory. [ABSTRACT FROM AUTHOR]

Many different aspects of software system development and verification rely on precise function identification in binary code. Recognition of the source Assembly functions in embedded systems is one of the fundamental challenges in binary program analysis. While numerous approaches assume that the functions are given a priori, correct identification of the functions in binaries remains a great issue. This contribution addresses the problem of uncertainty in binary code in identification of functions, which were optimized during compilation. This paper investigates the difference between debug and optimized functions via modeling of these functions. To do so, we introduce an extensible model-centred hands-on approach for examining similarities between binary functions. The main idea is to model each function using a set of predetermined, experimentally discovered features, and then find a suitable weight vector that could give impact factor to each such a feature. After finding the weight vector, the introduced models of such desired functions can be identified in binary software packages. It means that we reduce the similarity identification problem of the models to a classical version of optimization problems with one optimization criterion. Using our implementation, we found that the proposed approach works smoothly for functions, which contain at least ten Assembly instructions. Our tool guarantees success at a very high level. [ABSTRACT FROM AUTHOR]

In this paper, we give a classification of extremal Type II Z 4 -codes of length 24. This is equivalent to a classification of 4-frames of the Leech lattice up to the action of the automorphism group. [ABSTRACT FROM AUTHOR]

The traditional pointer instrument recognition scheme is implemented in three steps, which is cumbersome and inefficient. So it is difficult to apply to the industrial production of real-time monitoring. Based on the improvement of the CSL coding method and the setting of the pre-cache mechanism, an intelligent reading recognition technology of the YOLOv5 pointer instrument is proposed in this paper, which realizes the rapid positioning and reading recognition of the pointer instrument. The problem of angle interaction in rotating target detection is eliminated, the complexity of image preprocessing is avoided, and the problems of poor adaptability of Hough detection are solved in this strategy. The experimental results show that compared with the traditional algorithm, the algorithm in this paper can effectively identify the angle of the pointer instrument, has high detection efficiency and strong adaptability, and has broad application prospects. [ABSTRACT FROM AUTHOR]

This paper reveals the hidden dangers of reverse data modifications on distributed software with network synchronization, during the era of 5G, which may occur in more important domains, such as telemedicine and automatic driving. We used pseudo-codes to formally elaborate the distributed software architectures and design patterns. It is necessary to deal with three challenges for the modification of binary code and data in the distributed software architectures: (1) the base virtual addresses of software objects are changed frequently for safety; (2) prior knowledge of the reverse is not considered; (3) system memory values of some target objects are changed with extreme speed. For this purpose, a novel reverse modification method for binary code and data is proposed. According to the knowledge-based rules, our method can manipulate physical data, sight data, animation data, etc., while the game synchronization mechanism cannot detect the changes. The implementation details of our method are presented using high-level programming languages (C++) and low-level programming languages (assembly), based on multiple snippets, so that readers can understand both the overall distributed software developments and the corresponding reverse processes. In particular, two network games are used for the demonstrations in this paper. The demonstration results show that our proposed methodology is efficient (as proved by formulas and practices) to manipulate the codes and data of distributed software using a synchronization mechanism. [ABSTRACT FROM AUTHOR]

The complex environments and weak infrastructure constructions of hilly mountainous areas complicate the effective path planning for plant protection operations. Therefore, with the aim of improving the current status of complicated tea plant protections in hills and slopes, an unmanned aerial vehicle (UAV) multi-tea field plant protection route planning algorithm is developed in this paper and integrated with a full-coverage spraying route method for a single region. By optimizing the crossover and mutation operators of the genetic algorithm (GA), the crossover and mutation probabilities are automatically adjusted with the individual fitness and a dynamic genetic algorithm (DGA) is proposed. The iteration period and reinforcement concepts are then introduced in the pheromone update rule of the ant colony optimization (ACO) to improve the convergence accuracy and global optimization capability, and an ant colony binary iteration optimization (ACBIO) is proposed. Serial fusion is subsequently employed on the two algorithms to optimize the route planning for multi-regional operations. Simulation tests reveal that the dynamic genetic algorithm with ant colony binary iterative optimization (DGA-ACBIO) proposed in this study shortens the optimal flight range by 715.8 m, 428.3 m, 589 m, and 287.6mcompared to the dynamic genetic algorithm, ant colony binary iterative algorithm, artificial fish swarm algorithm (AFSA) and particle swarm optimization (PSO), respectively, for multiple tea field scheduling route planning. Moreover, the search time is reduced by more than half compared to other bionic algorithms. The proposed algorithm maintains advantages in performance and stability when solving standard traveling salesman problems with more complex objectives, as well as the planning accuracy and search speed. In this paper, the research on the planning algorithm of plant protection route for multi-tea field scheduling helps to shorten the inter-regional scheduling range and thus reduces the cost of plant protection. [ABSTRACT FROM AUTHOR]

This paper proposes a novel automotive radar waveform involving the theory behind M-ary frequency shift key (MFSK) radar systems. Along with the MFSK theory, coding schemes are studied to provide a solution to mutual interference. The proposed MFSK waveform consists of frequency increments throughout the range of 76 GHz to 81 GHz with a step value of 1 GHz. Instead of stepping with a fixed frequency, a triangular chirp sequence allows for static and moving objects to be detected. Therefore, automotive radars will improve Doppler estimation and simultaneous range of various targets. In this paper, a binary coding scheme and a combined transform coding scheme used for radar waveform correlation are evaluated in order to provide unique signals. AVs have to perform in an environment with a high number of signals being sent through the automotive radar frequency band. Efficient coding methods are required to increase the number of signals that are generated. An evaluation method and experimental data of modulated frequencies as well as a comparison with other frequency method systems are presented. [ABSTRACT FROM AUTHOR]

High-Efficiency Video Coding (HEVC) has a higher coding efficiency, its encoding performance must be increased to keep up with the expanding number of multimedia applications. Therefore, this paper proposes a novel Rectified Linear Unit-Bidirectional Long Short-Term Memory-based Tree Social Relations Optimization (ReLU-BiLSTM-based TSRO) method to enhance the quality of video transmission. The significant objective of our proposed method aims in enhancing the standards of entropy encoding process in HEVC. Here, context-adaptive binary arithmetic coding (CABAC) framework which is prevalent and an improved form of entropy coding model is utilized in HEVC standards. In addition to this, the performances of the proposed method are determined by evaluating various measures such as mean square error, cumulative distribution factor, compression ratio, peak signal-to-noise ratio (PSNR) and bit error rate. Finally, the proposed method is examined with five different sequences of video from football, tennis, garden, mobile and coastguard. The performances of the proposed method are compared with various approaches, and the result analysis shows that the proposed method attained minimum mean square error (MSE) loss with maximum PSNR rate. [ABSTRACT FROM AUTHOR]

This paper analyses the design of a healthy interior environment using big data intelligence. The application of big data intelligence in the design of healthy interior environments is necessary because the traditional interior design approaches consume a lot of energy and other problems. Benefited by its strong ability of computation and analytics, artificial intelligence can well improve a series of problems in the field of interior design. The proposal summarizes the sources, classifications, and expressions of behavioral data in interior spaces, carries out analysis and research on behavioral data from two aspects: display space and supermarket space, summarizes the interior methods based on behavioral data, and analyses the visualization application of behavioral data in different interior scenes, to explore the application value of behavioral data in interior design. In contrast to it is the unconscious behavioral response, the biggest characteristic of which is that it is regulated by the behavioral subject's physiological factors or habits of the behavior issuer. In this paper, we convert the layout recommendation problem of a space into a functional classification problem of segmented segments and household segments on a plane. The scene layout features are extracted by binary coding, the abstraction of the cross features between the vector segments is achieved by using a word embedding algorithm, the feature matrix is reduced in dimensionality, and finally, the segmentation network model and the layout network model are constructed, respectively, by using a bidirectional LSTM. The experiments show that the accuracy of the layout recommendation model in this paper is 98%, which can meet the demand for real-time online layouts. [ABSTRACT FROM AUTHOR]

Many families of binary nonlinear codes (e.g., Kerdock, Goethals, Delsarte–Goethals, Preparata) can be very simply constructed from linear codes over the Z 4 ring (ring of integers modulo 4), by applying the Gray map to the quaternary symbols. Generalized Kerdock codes represent an extension of classical Kerdock codes to the Z 2 S ring. In this paper, we develop two novel soft-input decoders, designed to exploit the unique structure of these codes. We introduce a novel soft-input ML decoding algorithm and a soft-input soft-output MAP decoding algorithm of generalized Kerdock codes, with a complexity of O (N S log 2 N) , where N is the length of the Z 2 S code, that is, the number of Z 2 S symbols in a codeword. Simulations show that our novel decoders outperform the classical lifting decoder in terms of error rate by some 5 dB. [ABSTRACT FROM AUTHOR]

How to model the effect of reflection is crucial for single image reflection removal (SIRR) task. Modern SIRR methods usually simplify the reflection formulation with the assumption of linear combination of a transmission layer and a reflection layer. However, the large variations in image content and the real-world picture-taking conditions often result in far more complex reflection. In this paper, we introduce a new screen-blur combination based on two important factors, namely the intensity and the blurriness of reflection, to better characterize the reflection formulation in SIRR. Specifically, we present Screen-blur Reflection Networks (SRNet), which executes the screen-blur formulation in its network design and adapts to the complex reflection on real scenes. Technically, SRNet consists of three components: a blended image generator, a reflection estimator and a reflection removal module. The image generator exploits the screen-blur combination to synthesize the training blended images. The reflection estimator learns the reflection layer and a blur degree that measures the level of blurriness for reflection. The reflection removal module further uses the blended image, blur degree and reflection layer to filter out the transmission layer in a cascaded manner. Superior results on three different SIRR methods are reported when generating the training data on the principle of the screen-blur combination. Moreover, extensive experiments on six datasets quantitatively and qualitatively demonstrate the efficacy of SRNet over the state-of-the-art methods. [ABSTRACT FROM AUTHOR]

An efficient hybrid optimization algorithm is introduced in this paper to optimize the lightweight design of high-aspect-ratio wings, tackling the complexities associated with the mixed optimization design of layout and size variables within these wing structures. A hybrid binary unified coding description facilitates the optimization process for layout and size variables. The study influences one-dimensional convolutional neural networks to establish an aeroelastic surrogate model, primarily chosen for their exceptional performance in handling multi-parameter aeroelastic regression problems. Additionally, the squirrel optimization algorithm is chosen over the genetic algorithm for the mixed optimization problem, leading to notable savings in computational costs. The research demonstrates that the proposed hybrid optimization method, integrating the one-dimensional convolutional neural network and the squirrel optimization algorithm, offers superior performance in optimizing high aspect ratio wings. Specifically, it results in a reduction of 4.1% in the weight of the wing structure. Moreover, the study highlights the necessity of this hybrid approach due to the observed coupling between the layout variables of the wing ribs and the size variables of the wing beams. [ABSTRACT FROM AUTHOR]

Binary duadic codes are an interesting subclass of cyclic codes since they have large dimensions and their minimum distances may have a square-root bound. In this paper, we present several families of binary duadic codes of length 2 m - 1 and develop some lower bounds on their minimum distances by using the BCH bound on cyclic codes, which partially solves one case of the open problem proposed in Liu et al (Finite Field Appl 91:102270, 2023). It is shown that the lower bounds on their minimum distances are close to the square root bound. Moreover, the parameters of the dual and extended codes of these binary duadic codes are investigated. [ABSTRACT FROM AUTHOR]

Binary codes have a special place in coding theory since they are one of the most commonly used in practice. There are classes of codes specific only to the binary case. One such class is self-complementary codes. Self-complementary linear codes are binary codes that, together with any vector, contain its complement as well. This paper is about binary linear self-complementary codes. A natural goal in coding theory is to find a linear code with a given length n and dimension k such that the minimum distance d is maximal. Codes with these properties are called optimal. Another important issue is classifying the optimal codes, i.e., finding exactly one representative of each equivalence class. In some sense, the classification problem is more general than the minimum distance bounds problem. In this work, we summarize the classification results for self-complementary codes with the maximum possible minimum distance and a length of up to 20. For the classification, we developed a new algorithm that is much more efficient compared to existing ones in some cases. [ABSTRACT FROM AUTHOR]

In this paper, we used the definition of fuzzy vector spaces and fuzzy subsets in combination in order to define fuzzy codes over a fuzzy vector space. We found that the combined definitions did not satisfy the definition of fuzzy vector spaces over a Galois field F2, and gave the conditions in which the combined definitions hold the definition of fuzzy vector spaces in order to define binary fuzzy codes. By defining binary fuzzy codes over fuzzy vector space in relation to the probability of binary symmetric channels (BSC) sending a codeword incorrectly and the weight of error pattern between codewords, we updated properties of Hamming distance of binary fuzzy codes over fuzzy vector space. From the updated properties, we found that the properties of Hamming distance stated over a vector space also satisfy in binary fuzzy codes defined over a fuzzy vector space. Furthermore, we found some interesting results on the decoding of fuzzy codewords sent over a BSC using minimum nonzero Hamming distance of binary fuzzy codes. [ABSTRACT FROM AUTHOR]

In this paper, a network consisting of an object localization module and a discriminative feature extraction module is designed for fine-grained image retrieval (FGIR). In order to reduce the interference of complex backgrounds, the object localization module is introduced into the network before feature extraction. By selecting the convolutional feature descriptors, the main object is separated from the background, and thus, most of the interference is filtered out. Further, in order to improve the overall performance of the network, a discriminative filter bank is introduced into the network as the local feature detector. Hence, the local discriminative features can be extracted directly from the original feature map. The experimental results based on the CUB-200-2011 and Cars-196 datasets demonstrate that the proposed method can improve the performance of FGIR. [ABSTRACT FROM AUTHOR]

In recent years, researchers have studied various methods for transferring data in a network-separated environment, and the most representative method is the use of inaudible frequency signals like ultrasonic waves. This method has the advantage of being able to transfer data without other people noticing, but it has the disadvantage that speakers must exist. In a laboratory or company, external speakers may not be attached to each computer. Therefore, this paper presents a new covert channel attack that transfers data using internal speakers on the computer's motherboard. The internal speaker can also produce a sound of the desired frequency, and, therefore, data can be transferred using high frequency sounds. We encode data into Morse code or binary code and transfer it. Then we record it using a smartphone. At this time, the location of the smartphone can be any distance within 1.5 m when the length per bit is longer than 50 ms, such as on the computer body or on the desk. Data are obtained by analyzing the recorded file. Our results show that data is transferred from a network-separated computer using an internal speaker with 20 bits/s in maximum. [ABSTRACT FROM AUTHOR]

Binary linear codes with few weights have wide applications in communication, secret sharing schemes, authentication codes, association schemes, strongly regular graphs, etc. Projective binary linear codes are among the most important subclasses of binary linear codes for practical applications. In this paper, motivated by the two excellent recent papers (Li et al. in IEEE Trans Inf Theory 67(7):4263–4275, 2021) and (Wang et al. in IEEE Trans Inf Theory 67(8):5133–5148, 2021), several new families of few-weight projective binary linear codes are constructed from the defining sets, and then their Hamming weight distributions are determined by employing the Walsh transform of the corresponding two-to-one functions over finite fields with the even characteristic. Our constructions can produce binary linear codes with new parameters. Some of the constructed binary linear codes are optimal or almost optimal according to the online Database of Grassl, and the duals of some of them are distance-optimal with respect to the sphere packing bound. This paper also shows once again that the two-to-one functions initially studied in (Mesnager and Qu in IEEE Trans Inf Theory 65(12):7884–7895, 2019) are also promising objects in coding theory. Although our derived codes use objects considered in the very recent literature, the analysis of our designed codes involves functions having different algebraic structures (and, therefore, other Walsh transform distribution) and requires solving new systems of equations over finite fields, which is an essential step in determining the weight distribution of our constructed codes. As applications, some of the codes presented in this paper can be used to construct association schemes and secret sharing schemes with interesting access structures. [ABSTRACT FROM AUTHOR]

Firmware formats vary from vendor to vendor, making it difficult to track which vendor or device the firmware belongs to, or to identify the firmware used in an embedded device. Current firmware analysis tools mainly distinguish firmware by static signatures in the firmware binary code. However, the extraction of a signature often requires careful analysis by professionals to obtain it and requires a significant investment of time and effort. In this paper, we use Doc2Vec to extract and process the character information in firmware, combine the file size, file entropy, and the arithmetic mean of bytes as firmware features, and implement the firmware classifier by combining the Extra Trees model. The evaluation is performed on 1,190 firmware files from 5 router vendors. The accuracy of the classifier is 97.18%, which is higher than that of current approaches. The results show that the proposed approach is feasible and effective. [ABSTRACT FROM AUTHOR]

The ever-increasing need to ensure that code is reliably, efficiently and safely constructed has fueled the evolution of popular static binary code analysis tools. In identifying potential coding flaws in binaries, tools such as IDA Pro are used to disassemble the binaries into an opcode/ assembly language format in support of manual static code analysis. Because of the highly manual and resource-intensive nature involved with analyzing large binaries, the probability of overlooking potential coding irregularities and inefficiencies is quite high. In this paper, a light-weight, unsupervised data flow methodology is described which uses highly correlated data flow graph (CDFGs) to identify coding irregularities such that analysis time and required computing resources are minimized. Such analysis accuracy and efficiency gains are achieved by using a combination of graph analysis and unsupervised machine learning techniques which allows an analyst to focus on the most statistically significant flow patterns while performing binary static code analysis. [ABSTRACT FROM AUTHOR]

POI recommendation has gradually become an important topic in the field of service recommendation, which is always achieved by mining user behavior patterns. However, the context information of the collaborative signal is not encoded in the embedding process of traditional POI recommendation methods, which is not enough to capture the collaborative signal among different users. Therefore, a POI recommendation algorithm is presented by using social-time context graph neural network model (GNN) in location-based social networks. First, it finds similarities between different social relationships based on the users' social and temporal behavior. Then, the similarity among different users is calculated by an improved Euclidean distance. Finally, it integrates the graph neural network, the interaction bipartite graph of users and social-time information into the algorithm to generate the final recommendation list in this paper. Experiments on real datasets show that the proposed method is superior to the state-of-the-art POI recommendation methods. [ABSTRACT FROM AUTHOR]

Boolean functions with high algebraic immunity are important cryptographic primitives in some stream ciphers. In this paper, two methodologies for constructing minimal binary codes from sets, Boolean functions and vectorial Boolean functions with high algebraic immunity, are proposed. More precisely, a general construction of new minimal codes using minimal codes contained in Reed-Muller codes and sets without nonzero low degree annihilators is presented. The other construction allows us to yield minimal codes from certain subcodes of Reed-Muller codes and vectorial Boolean functions with high algebraic immunity. Via these general constructions, infinite families of minimal binary linear codes of dimension $m$ and length less than or equal to $m(m+1)/2$ are obtained. Besides, a lower bound on the minimum distance of the proposed minimal linear codes is established. Conjectures and open problems are also presented. The results of this paper show that Boolean functions with high algebraic immunity have nice applications in several fields additionally to symmetric cryptography, such as coding theory and secret sharing schemes. [ABSTRACT FROM AUTHOR]

Against the backdrop of highly developed software engineering, code reuse has been widely recognized as an effective strategy to significantly alleviate the burden of development and enhance productivity. However, improper code citation could lead to security risks and license issues. With the source codes of many pieces of software being difficult to obtain, binary code similarity analysis (BCSA) has been extensively implemented in fields such as bug search, code clone detection, and patch analysis. This research selects 39 papers on BCSA from top-tier and emerging conferences within artificial intelligence, network security, and software engineering from 2016 to 2022 for deep analysis. The central focus lies on methods utilizing deep learning technologies, detailing a thorough summary and the arrangement of the application and implementation specifics of various deep learning technologies. Furthermore, this study summarizes the research patterns and development trends in this field, thereby proposing potential directions for future research. [ABSTRACT FROM AUTHOR]

Previous studies have shown that the application of the M-coder in the H.264/AVC and H.265/HEVC video coding standards allows for highly parallel implementations without decreasing maximal frequencies. Although the primary limitation on throughput, originating from the range register update, can be eliminated, other limitations are associated with low register processing. Their negative impact is revealed at higher degrees of parallelism, leading to a gradual throughput saturation. This paper presents optimizations introduced to the generative hardware architecture to increase throughputs and hardware efficiencies. Firstly, it can process more than one bypass-mode subseries in one clock cycle. Secondly, aggregated contributions to the codestream are buffered before the low register update. Thirdly, the number of contributions used to update the low register in one clock cycle is decreased to save resources. Fourthly, the maximal one-clock-cycle renormalization shift of the low register is increased from 32 to 64 bit positions. As a result of these optimizations, the binary arithmetic coder, configured for series lengths of 27 and 2 symbols, increases the throughput from 18.37 to 37.42 symbols per clock cycle for high-quality H.265/HEVC compression. The logic consumption increases from 205.6k to 246.1k gates when synthesized on 90 nm TSMC technology. The design can operate at 570 MHz. [ABSTRACT FROM AUTHOR]

The feature graph (Q-H graph) is the best way to intuitively and quantitatively reflect all features of the ventilation network. In this paper, an optimized adaptive genetic algorithm is proposed to solve the problem that rectangular blocks are cut in the process of drawing a Q-H diagram of a three-dimensional ventilation network. The algorithm adopts binary coding based on node sorting and mixed genetic coding based on integer coding. The formulas for calculating the adaptive crossover rate and mutation rate are designed, which can effectively generate new individuals and get rid of the search for local optimal values, ensuring the global optimal solution. Matlab was used to test the optimization effect of the Q-H graph; the results show that, for a complex ventilation network, the improved adaptive genetic algorithm can make the Q-H graph significantly reduce the number of rectangular pieces, which is divided, and make the Q-H graph have better effect to draw clearly and intuitively. [ABSTRACT FROM AUTHOR]

Nested linear coding is a widely used technique in wireless communication systems for improving both security and reliability. Some parameters, such as the relative generalized Hamming weight and the relative dimension/length profile, can be used to characterize the performance of nested linear codes. In addition, the rank properties of generator and parity-check matrices can also precisely characterize their security performance. Despite this, finding optimal nested linear secrecy codes remains a challenge in the finite-blocklength regime, often requiring brute-force search methods. This paper investigates the properties of nested linear codes, introduces a new representation of the relative generalized Hamming weight, and proposes a novel method for finding the best nested linear secrecy code for the binary erasure wiretap channel by working from the worst nested linear secrecy code in the dual space. We demonstrate that our algorithm significantly outperforms the brute-force technique in terms of speed and efficiency. [ABSTRACT FROM AUTHOR]

Remote sensing (RS) cross-modal text–image retrieval has great application value in many fields such as military and civilian. Existing methods utilize the deep network to project the images and texts into a common space and measure the similarity. However, the majority of those methods only utilize the inter-modality information between different modalities, which ignores the rich semantic information within the specific modality. In addition, due to the complexity of the RS images, there exists a lot of interference relation information within the extracted representation from the original features. In this paper, we propose a jointly guided deep network for fine-grained cross-modal RS text–image retrieval. First, we capture the fine-grained semantic information within the specific modality and then guide the learning of another modality of representation, which can make full use of the intra- and inter-modality information. Second, to filter out the interference information within the representation extracted from the two modalities of data, we propose an interference filtration module based on the gated mechanism. According to our experimental results, significant improvements in terms of retrieval tasks can be achieved compared with state-of-the-art algorithms. The source code is available at https://github.com/CQULab/JGDN. [ABSTRACT FROM AUTHOR]

The new type of multi-temporal global land use data with multiple classes is able to provide information on both the different land covers and their temporal changes; furthermore, it is able to contribute to many applications, such as those involving global climate and Earth ecosystem analyses. However, the current accuracy assessment methods have two limitations regarding multi-temporal land cover data that have multiple classes. First, multi-temporal land cover uses data from multiple phases, which is time-consuming and inefficient if evaluated one by one. Secondly, the conversion between different land cover classes increases the complexity of the sample stratification, and the assessments with different types of land cover suffer from inefficient sample stratification. In this paper, we propose a spatiotemporal stratified sampling method for stratifying the multi-temporal GlobeLand30 products for China. The changed and unchanged types of each class of data in the three periods are used to obtain a reasonable stratification. Then, the strata labels are simplified by using binary coding, i.e., a 1 or 0 representing a specified class or a nonspecified class, to improve the efficiency of the stratification. Additionally, the stratified sample size is determined by the combination of proportional allocation and empirical evaluation. The experimental results show that spatiotemporal stratified sampling is beneficial for increasing the sample size of the "change" strata for multi-temporal data and can evaluate not only the accuracy and area of the data in a single data but also the accuracy and area of the data in a multi-period change type and an unchanged type. This work also provides a good reference for the assessment of multi-temporal data with multiple classes. [ABSTRACT FROM AUTHOR]

We study the probability of an undetected error for general q-ary codes. We give upper and lower bounds on this quantity, by the Linear Programming and the Polynomial methods, as a function of the length, size, and minimum distance. Sharper bounds are obtained in the important special case of binary Hamming codes. Finally, several examples are given to illustrate the results of this paper. [ABSTRACT FROM AUTHOR]

Two general constructions of linear codes with functions over finite fields have been extensively studied in the literature. The first one is given by C(ƒ) = {Tr(aƒ(x) + bx)x∈Fqm*: a, b ∈ Fqm}, where q is a prime power, Fqm* = Fqm \ {0}, Tr is the trace function from Fqm to Fq, and ƒ(x) is a function from Fqm to Fqm with ƒ(0) = 0. Almost bent functions, quadratic functions and some monomials on F2m were used in the first construction, and many families of binary linear codes with few weights were obtained in the literature. This paper studies some punctured codes of these binary codes. Several families of binary linear codes with few weights and new parameters are obtained in this paper. Several families of distance-optimal binary linear codes with new parameters are also produced in this paper. [ABSTRACT FROM AUTHOR]

Based on the relaxation digital‐to‐analog converter (ReDAC) architecture and the capacitor charge/discharge function under discrete time conditions, this paper proposes a new mathematical model for the output voltage of the ReDAC to implement the unconstrained relaxation DAC (Uc‐ReDAC). The system clock calibration is not required. An adaptive probabilistic binary particle swarm optimization (AP‐BPSO) algorithm is proposed for solving the binary coding configuration problem under the Uc‐ReDAC model. Simulation results show that the 8‐bit (10‐bit) Uc‐ReDAC has an average sampling rate of 7.9 MS/s (6.76 MS/s). [ABSTRACT FROM AUTHOR]

The family of Goppa codes is one of the most interesting subclasses of linear codes. As the McEliece cryptosystem often chooses a random Goppa code as its key, knowledge of the number of inequivalent Goppa codes for fixed parameters may facilitate in the evaluation of the security of such a cryptosystem. In this paper we present a new approach to give an upper bound on the number of inequivalent extended irreducible binary Goppa codes. To be more specific, let $n>3$ be an odd prime number and $q=2^{n}$ ; let $r\geq 3$ be a positive integer satisfying $\gcd (r,n)=1$ and $\gcd \big (r,q(q^{2}-1)\big)=1$. We obtain an upper bound for the number of inequivalent extended irreducible binary Goppa codes of length $q+1$ and degree $r$. [ABSTRACT FROM AUTHOR]