Search

Background: The number of football teams in senior categories has increased. As outdoor sports entail players being exposed to sunlight, playing football may contribute to maintaining vitamin D stores and body mineral density while preventing osteoporosis. This study aimed to determine the bone mineral density and vitamin D levels in middle-aged premenopausal female football players. Methods: Participants were premenopausal females in their 40s. We evaluated bone mineral density of the second to the fourth lumbar vertebrae and femoral neck, serum 25-hydroxy vitamin D (25-OHD) levels, which is an indicator of vitamin D stores, and body composition. In addition, we administered a questionnaire survey on exercise habits and lifestyle. Ninety-two participants were categorised into three groups: the football group (n = 27), volleyball group (n = 40), and non-exercise group (n = 25). Results: Bone mineral density was higher in the football and volleyball groups than in the non-exercise group (P < 0.01). The volleyball group had a significantly higher bone mineral density of the lumbar spine and femoral neck than the non-exercise group (P < 0.01). The football group had a significantly higher bone mineral density of the femoral neck than the non-exercise group (P < 0.01). Although the football group had played fewer years than the volleyball group (P < 0.01), serum 25-OHD levels were the highest in the football group and were significantly higher than those in the volleyball and non-exercise groups (P < 0.01). Conclusions: Middle-aged premenopausal football players had higher body vitamin D levels and bone mineral densities than non-active females. These results suggest that playing football may contribute to the prevention of osteoporosis. Trial registration: UMIN Clinical Trials Registry UMIN000054235. 2024/04/23. Retrospectively registered. [ABSTRACT FROM AUTHOR]

This research has developed a fabricating process of thin‐strain sensor by utilizing wafer‐level‐packaging (WLP) techniques. The thickness of sensor makes thinner, its performance is able to highly increase. However, the thinner sensor was fragile, and so it was difficult to handle in post processes. Thus, a thin sensor with lid by utilizing WLP techniques, which is tough to break even when handled, is proposed in this research. More than 250‐µm‐deep grooves were fabricated around the lid by deep reactive ion etching. After the lid substrate was bonded on the sensor substrate with a resin, the sensor and lid substrates were respectively polished to 50 and 200 µm thickness. The lids were released along the grooves, and the 50‐µm‐thick strain sensors were able to be fabricated by utilizing WLP techniques. This sensor was used as a diaphragm to measure pressure. The sensors were assembled on a stainless steel housing without breakage. The performance of the developed sensor was almost showed with a conventional pressure sensor. [ABSTRACT FROM AUTHOR]

Background Scrub typhus (ST) is endemic in Fukushima, with the largest number of cases reported in Japan from 2009 to 2010. Although ST is highly treatable, its atypical clinical presentation impedes diagnosis, causing delays in treatment. Methods We review the clinical features of ST in adults from 2008 to 2017 at Ohta Nishinouchi General Hospital in Fukushima, Japan. Results Fifty-five cases (serotype Karp 24, Irie/Kawasaki 21, Hirano/Kuroki 10) of ST were confirmed via serology based on elevated immunoglobulin (Ig)M and IgG and polymerase chain reaction positivity of eschar samples. The mean age was 69 years, and 64% were female. The case fatality rate was 1.8% (1/55). Approximately 70% of cases (38/55) were not diagnosed as ST upon the initial clinic visit. Inappropriate use of antibiotics was identified in 22% of cases (12/55). In terms of atypical clinical features, 1 or more of the manifestations, fever, rash, and eschar, was absent in 31% of cases (17/55). Approximately 11% of cases presented without eschar (6/55; Karp 1, Irie/Kawasaki 1, Hirano/Kuroki 4). Moreover, severe complications were observed with shock and disseminated intravascular coagulation in 7% of cases (4/55), Thus, while 53% of cases presented with the typical triad (29/55), unusual complications and atypical features occurred in 40% (22/55). Conclusions Diagnosis of ST becomes clinically challenging in the absence of typical features. In Fukushima, an endemic area of ST, an atypical presentation involving multisystem disease is common. [ABSTRACT FROM AUTHOR]

The objective of this study is to evaluate the impact of the thickness and translucency of various computer-aided design/computer-aided manufacturing (CAD/CAM) materials on the polymerization of dual-cure resin cement in endocrown restorations. Three commercially available CAD/CAM materials—lithium disilicate glass (e.max CAD), resin composite (CERASMART), and a polymer-infiltrated ceramic network (ENAMIC)—were cut into plates with five different thicknesses (1.5, 3.5, 5.5, 7.5, and 9.5 mm) in both high-translucency (HT) and low-translucency (LT) grades. Panavia V5, a commercial dual-cure resin cement, was polymerized through each plate by light irradiation. Post-polymerization treatment was performed by aging at 37 °C for 24 h under light-shielding conditions. The degree of conversion and Vickers hardness measurements were used to characterize the polymerization of the cement. The findings revealed a significant decrease in both the degree of conversion and Vickers hardness with increasing thickness across all CAD/CAM materials. Notably, while the differences in the degree of conversion and Vickers hardness between the HT and LT grades of each material were significant immediately after photoirradiation, these differences became smaller after post-polymerization treatment. Significant differences were observed between samples with a 1.5 mm thickness (conventional crowns) and those with a 5.5 mm or greater thickness (endocrowns), even after post-polymerization treatment. These results suggest that dual-cure resin cement in endocrown restorations undergoes insufficient polymerization. [ABSTRACT FROM AUTHOR]

Hydrofluoric acid (HF) is commonly used as an etchant for the pretreatment of dental computer-aided design/computer-aided manufacturing (CAD-CAM) materials, such as glass-ceramics and resin composites. Despite its effectiveness, the harmful and hazardous nature of HF has raised significant safety concerns. In contrast, ammonium fluoride (AF) is known for its relatively low toxicity but has limited etching capability. This study explored the potential of ammonium hydrogen sulfate (AHS), a low-toxicity and weak acid, to enhance the etching ability of aqueous AF solutions for the bonding pretreatment of CAD-CAM materials. This study investigated five types of aesthetic CAD-CAM materials: lithium disilicate glass, feldspathic porcelain, polymer-infiltrated ceramic networks, resin composites, and zirconia. Seven experimental etchants were prepared by varying the amount of AHS added to aqueous AF solutions, with each etchant used to etch the surfaces of the respective CAD-CAM materials. The treated surfaces were analyzed using scanning electron microscopy and confocal laser scanning microscopy. Additionally, the shear bond strength (SBS) of the CAD-CAM materials treated with a luting agent (resin cement) was evaluated. The results indicated that the AF1/AHS3 (weight ratio AF:AHS = 1:3) etchant had the most substantial etching effect on the surfaces of silica-containing materials (lithium disilicate glass, feldspathic porcelain, polymer-infiltrated ceramic networks, and resin composites) but not on zirconia. The SBS of the materials treated with the AF1/AHS3 etchant was comparable to that of the commercial HF etchant. Hence, an AF/AHS mixed solution could effectively etch silica-containing CAD-CAM materials, thereby enhancing their bonding capabilities. [ABSTRACT FROM AUTHOR]

Researchers have increasingly concentrated on loneliness in the workplace as a crucial factor influencing the mental health of employees and the viability of telework. In contrast, the current understanding of the strategies mitigating workplace loneliness and how leaders utilize their behaviors to impact followers' loneliness remains limited. Since servant leadership values the emotional needs of followers and displays a high level of empathy, this study investigated the direct and indirect effects of servant leadership on workplace loneliness. In this study, 267 employees (mean age = 31.5 years) from 28 provinces in China were recruited to participate in this survey. We proposed that servant leaders motivate their own empathic communication and other followers' empathic communication to reduce lonely followers' workplace loneliness. This research further examined the relationship between the leader's and colleagues' empathic communication, and the two jointly mediate the connection between servant leadership and followers' workplace loneliness. We constructed a serial mediation model to examine the relationships between servant leadership, leader's empathic communication, colleagues' empathic communication, and workplace loneliness. The results indicate that servant leadership creates a cycle of empathy and provides insights into building a culture of empathy to improve employee well-being. [ABSTRACT FROM AUTHOR]

Somatic mosaicism of isocitrate dehydrogenase 1/2 (IDH1/2) mutation is a cause of Ollier disease (OD), characterized by multiple enchondromatosis. A 35‐year‐old woman who was diagnosed with OD at age 24 underwent resection surgery for multifocal tumors located at the right and left frontal lobes that were discovered incidentally. No apparent spatial connection was observed on preoperative magnetic resonance imaging. Pathological examinations revealed tumor cells with a perinuclear halo in the left frontal lobe tumor, whereas astrocytic tumor cells were observed in the right frontal lobe tumor. Based on positive IDH1 R132H immunostaining and the result of 1p/19q fluorescent in situ hybridization, pathological diagnoses were IDH mutant and 1p/19q‐codeleted oligodendroglioma in the right frontal lobe tumor and IDH mutant astrocytoma in the left frontal lobe tumor, respectively. The DNA sequencing revealed IDH1 R132H mutation in the peripheral blood sample and frontal lobe tumors. This case suggested that in patients with OD, astrocytoma and oligodendroglioma can co‐occur within the same individual simultaneously, and IDH1 R132H mutation was associated with supratentorial development of gliomas. [ABSTRACT FROM AUTHOR]