Search

Shape-stable solid–solid phase-change material (PCM) has attracted much attention due to its excellent thermal properties and shape stability. In this study, cellulose nanocrystal (CNC) was introduced as a high thermal-conductivity nanoskeleton material, and polyethylene glycol (PEG) was used as a solid–liquid phase-change functional material. A green, simple aqueous phase radical polymerization method was used to synthesize shape-stable CNC-based solid–solid phase-change material. The effect of different reaction times on the chemical structure, crystallization ability, thermal stability, and phase transformation properties of the PCM was investigated. All PCM samples showed excellent thermal stability when the temperature was lower than 300 °C. In particular, the synthesized PCM at 12 h had a melt phase transition temperature of 47.1 °C and a phase transition enthalpy up to 82.3 J/g. In addition, the phase-change enthalpy and temperature of PCM-12h did not change significantly after 120 heating and cooling scans. The PCM-12h showed thermal reliability, shape stability, controlled phase-change behaviors, and good heat storage/release properties after thermal treatment. The PCM has potential applications in smart heat storage and temperature control textiles/clothes, building insulation materials, and other energy storage fields. [ABSTRACT FROM AUTHOR]

The studies revealed that silk fibroin from the silkworm Bombyx mori is an Ala/Gly-rich protein, which is spun from aqueous solution at room temperature to produce strong and elastic fibers. The report states that the constituting 55% of the total silk fiber thus, consists of 18% distorted beta-turn, 13% beta-sheet with parallel Ala, and 25% beta-sheet with alternating Ala. Half of the local conformations in the remaining amorphous Tyr-rich region (45% of the total silk fiber) are distorted beta-turns, the other half, distorted beta-sheets.

Photoreceptor cells of vertebrates feature ultrastructural membranes interspersed with abundant photosensitive ion pumps to boost signal generation and realize high gain in dim light. In light of this, superstructured optoionic heterojunctions (SSOHs) with cation-selective nanochannels are developed for manipulating photo-driven ion pumping. A template-directed bottom-up strategy is adopted to sequentially assemble graphene oxide (GO) and PEDOT:PSS into heterogeneous membranes with sculptured superstructures, which feature programmable variation in membrane topography and contain a donor-acceptor interface capable of maintaining electron-hole separation upon photoillumination. Such elaborate design endows SSOHs with a much higher magnitude of photo-driven ion flux against a concentration gradient in contrast to conventional optoionic membranes with planar configuration. This can be ascribed to the buildup of an enhanced transmembrane potential owing to the effective separation of photogenerated carriers at the heterojunction interface and the increase of energy input from photoillumination due to a synergistic effect of reflection reduction, broad-angle absorption, and wide-waveband absorption. This work unlocks the significance of membrane topographies in photo-driven transmembrane transportation and proposes such a universal prototype that could be extended to other optoionic membranes to develop high-performance artificial ion pumps for energy conversion and sensing.

Charged nanocellulose (NC) with a high aspect ratio (larger than 100) extracted from animal or bacterial cellulose and chemical cross-linked NC aerogels have great promising applicability in material science, but facile fabrication of such NC aerogels from plant cellulose by physical cross-linking still remains a major challenge. In this work, carboxylated cellulose nanofiber (CNF) with the highest aspect ratio of 144 was extracted from wasted ginger fibers by a simple one-step acid hydrolysis. Our approach could easily make the carboxylated CNF assemble into robust bulk aerogels with tunable densities and desirable shapes on a large scale (3D macropores to mesopores) by hydrogen bonds. Excitingly, these CNF aerogels had better compression mechanical properties (99.5 kPa at 80% strain) and high shape recovery. Moreover, the CNF aerogels had strong coagulation-flocculation ability (87.1%), removal efficiency of MB dye uptake (127.73 mg/g), and moderate Cu 2+ absorption capacity (45.053 mg/g), which were due to assistance mechanisms of charge neutralization, network capture effect, and chain bridging of high aspect ratio carboxylated CNF. This provided a novel physical cross-linking method to design robust aerogels with modulated networked structures to be a general substrate material for industrial applications such as superabsorbent, flocculation, oil-water separation, and potential electrical energy storage materials.

The traditional approach toward improving the crystallization rate as well as the mechanical and barrier properties of poly(lactic acid) (PLA) is the incorporation of nanocelluloses (NCs). Unfortunately, little study has been focused on the influence of the differences in NC morphology and dimensions on the PLA property enhancement. Here, by HCOOH/HCl hydrolysis of lyocell fibers, microcrystalline cellulose (MCC), and ginger fibers, we unveil the preparation of cellulose nanospheres (CNS), rod-like cellulose nanocrystals (CNC), and cellulose nanofibers (CNF) with different aspect ratios, respectively. All the NC surfaces were chemically modified by Fischer esterification with hydrophobic formate groups to improve the NC dispersion in the PLA matrix. This study systematically compared CNS, CNC, and CNF as reinforcing agents to induce different kinds of heterogeneous nucleation and reinforce the effects on the properties of PLA. The incorporation of three NCs can greatly improve the PLA crystallization ability, thermal stability, and mechanical strength of nanocomposites. At the same NC loading level, the PLA/CNS showed the highest crystallinity (19.8 ± 0.4%) with a smaller spherulite size (33 ± 1.5 μm), indicating that CNS, with its high specific surface area, can induce a stronger heterogeneous nucleation effect on the PLA crystallization than CNC or CNF. Instead, compared to PLA, the PLA/CNF nanocomposites gave the largest Young's modulus increase of 350 %, due to the larger aspect ratio/rigidity of CNF and their interlocking or percolation network caused by filler-matrix interfacial bonds. Furthermore, taking these factors of hydrogen bonding interaction, increased crystallinity, and interfacial tortuosity into account, the PLA/CNC nanocomposite films showed the best barrier property against water vapor and lowest migration levels in two liquid food simulates (well below 60 mg kg -1 for required overall migration in packaging) than CNS- and CNF-based films. This comparative study was very beneficial for selecting reasonable nanocelluloses as nucleation/reinforcing agents in robust-barrier packaging biomaterials with outstanding mechanical and thermal performance.

Controlling the membrane surface properties such as hydrophobicity and hydrophilicity is critical to achieving desirable performance. For a long time, the difference between the surface wettabilities of superhydrophilic poly( m -phenylene isophthalamide) (PMIA) electrospun nanofibrous membranes (ESMs) and the superhydrophobic parent material is believed to arise from the poling effect induced by the electrospinning process and wicking caused by the porous membrane structure. In this study, the short-term poling effect was eliminated using a reference, centrifugally spun nanofibrous membrane that has a similar fiber morphology and specific surface area to those of the ESM; consequently, we investigated the changes in the surface properties of the ESM in detail. Chemical analysis by angle-resolved X-ray photoelectron spectroscopy revealed that the N and O concentrations are greater at the surface of the ESM. In addition, analysis of the membranes by attenuated total reflectance Fourier-transform infrared spectroscopy and Raman spectra revealed that large amounts of cis conformations of the amide bonds appeared on the surface of ESM after the electrospinning process. The results indicate that the remarkable surface properties of PMIA ESMs mainly arise from the change in the conformation of the amide groups from the stable trans form to the cis form. This change was confirmed by the subsequent in situ growth of Pt nanoparticles and the excellent dye adsorption capacity of the membrane., Competing Interests: The authors declare no competing financial interest.

The search for non-noble metal catalysts with high activity for the hydrogen evolution reaction (HER) is crucial for efficient hydrogen production at low cost and on a large scale. Herein, we report a novel WO3-x catalyst synthesized on carbon nanofiber mats (CFMs) by electrospinning and followed by a carbonization process in a tubal furnace. The morphology and composition of the catalysts were tailored via a simple method, and the hybrid catalyst mats were used directly as cathodes to investigate their HER performance. Notably, the as-prepared catalysts exhibit substantially enhanced activity for the HER, demonstrating a small overpotential, a high exchange current density, and a large cathodic current density. The remarkable electrocatalytic performances result from the poor crystallinity of WO3-x, the high electrical conductivity of WO3-x, and the use of electrospun CNFs. The present work outlines a straightforward approach for the synthesis of transition metal oxide (TMO)-based carbon nanofiber mats with promising applications for the HER.

Two-dimensional MoS2 nanoplates within carbon nanofibers (CNFs) with monolayer thickness, nanometer-scale dimensions and abundant edges are fabricated. This strategy provides a well-defined pathway for the precise design of MoS2 nanomaterials, offering control over the evolution of MoS2 morphology from nanoparticles to nanoplates as well as from mono- to several-layer structures, over a lateral dimension range of 5 to 70 nm. CNFs play an important role in confining the growth of MoS2 nanoplates, leading to increases in the amount of exposed edge sites while hindering the stacking and aggregation of MoS2 layers, and accelerating electron transfer. The controlled growth of MoS2 nanoplates embedded in CNFs is leveraged to demonstrate structure-dependent catalytic activity in the hydrogen evolution reaction (HER). The results suggest that increases in the number of layers and the lateral dimension result in a decrease in HER activity as a general rule. Single-layer MoS2 nanoplates with abundant edges and a lateral dimension of 7.3 nm demonstrated the lowest hydrogen evolution reaction overpotential of 93 mV (J = 10 mA/cm(2)), the highest current density of 80.3 mA/cm(2) at η = 300 mV and the smallest Tafel slope of 42 mV/decade. The ability of MoS2-CNFs hybrids to act as nonprecious metal catalysts indicates their promise for use in energy-related electrocatalytic applications.

Bombyx mori silk fibroin fiber is a fibrous protein produced by the silkworm at room temperature and from an aqueous solution whose primary structure is highly repetitive. In this study we analyzed the structural characteristics of native peptides, derived from B. mori silk fibroin, with formic acid treatment using high-resolution solid-state 13C NMR. We establish that the Ser residue bearing a short polar side chain has the ability to stabilize the conformation formed in the model peptides due to its ability to form intermolecular hydrogen bonds involving its hydroxyl group as a donor and the carbonyl groups of other residues as acceptors. On the other hand, insertion of Tyr residue in the basic (AG)n and (AGSGAG)n sequence motifs usually exhibited disruptive effects on the preferred conformations. Moreover, the environmental effect was investigated by mixing the native Cp fraction with the model peptides, showing that there is no significant structural difference on the Ser-containing peptides, while structural transformation was observed on the peptides containing the GAAS unit. This may be attributed to the fact that the Cp fraction promotes the formation of an antiparallel beta-sheet in the Ala-Ala unit. Such periodically disrupted ordered structures in the semicrystalline region of B. mori silk fibroin may be critical not only for facilitating the conformational transformation from silk I to silk II structural form but also for having some correlation with the unique properties of the silk materials.

There are many kinds of silks spun by silkworms and spiders, which are suitable to study the structure-property relationship for molecular design of fibers with high strength and high elasticity. In this review, we mainly focus on the structural determination of two well-known silk fibroin proteins that are from the domesticated silkworm, Bombyx mori, and the wild silkworm, Samia cynthia ricini, respectively. The structures of B. mori silk fibroin before and after spinning were determined by using an appropriate model peptide, (AG)(15), with several solid-state NMR methods; (13)C two-dimensional spin-diffusion solid-state NMR and rotational echo double resonance (REDOR) NMR techniques along with the quantitative use of the conformation-dependent (13)C CP/MAS chemical shifts. The structure of S. c. ricini silk fibroin before spinning was also determined by using a model peptide, GGAGGGYGGDGG(A)(12)GGAGDGYGAG, which is a typical repeated sequence of the silk fibroin, with the solid-state NMR methods. The transition from the structure of B. mori silk fibroin before spinning to the structure after spinning was studied with molecular dynamics calculation by taking into account several external forces applied to the silk fibroin in the silkworm.

A synthetic gene encoding a chimeric silklike protein was constructed that combined a polyalanine encoding region (Ala)(18), a sequence slightly longer than the (Ala)(12-13) found in the silk fibroin from the wild silkworm Samia cynthia ricini, and a sequence encoding GVGAGYGAGAGYGVGAGYGAGVGYGAGAGY, found in the silk fibroin from the silkworm Bombyx mori. A tetramer of the chimeric repeat sequence encoding a approximately 29 kDa protein was expressed as a fusion protein in Escherichia coli. In comparison to S. c. ricini silk, the chimeric protein demonstrated improved solubility because it could be dissolved in 8 M urea. The purified protein assumed an alpha-helical structure based on solid-state (13)C CP/MAS NMR and was less prone to conformational transition to a beta-sheet, unlike native silk proteins from S. c. ricini. Model peptides representing the crystalline region of S. c. ricini silk fibroin, (Ala)(12) and (Ala)(18), formed beta-sheet structures. Therefore, the solubility and structural transitions of the chimeric protein were significantly altered through the formation of this chimeric silk. This experimental strategy to the study of silk structure and function can be used to develop an improved understanding of the contributions of protein domains in repetitive silkworm and spider silk sequences to structure development and structural transitions.

The molecular conformation of silk fibrion is characterized by solid-state 13C NMR before spinning (silk I structure) and after spinning (silk II structure). We compare native silk fibers with the quasi-crystalline Cp-fraction and a synthetic model peptide (Ala-Gly)15, both of which can be converted either into silk I by dialysis from 9 M LiBr or into silk II by treatment with formic acid. Our results demonstrate that silk II fibers are intrinsically heterogeneous, consisting of beta-sheets, distorted beta-turns, and distorted beta-sheets. This higher-order heterogeneity is revealed by the 13C-NMR Cbeta-peak of Ala, indicating that the Ala side chains are stacked partially in parallel and partially face-to-face, at a ratio of 1:2.

The solid-state (13)C CP-MAS NMR spectra of biosynthetically labeled [(13)C(alpha)]Tyr, [(13)C(beta)]Tyr, and [(13)C(alpha)]Val silk fibroin samples of Bombyx mori, in silk I (the solid-state structure before spinning) and silk II (the solid-state structure after spinning) forms, have been examined to gain insight into the conformational preferences of the semicrystalline regions. To establish the relationship between the primary structure of B. mori silk fibroin and the "local" structure, the conformation-dependent (13)C chemical shift contour plots for Tyr C(alpha), Tyr C(beta), and Val C(alpha) carbons were generated from the atomic coordinates of high-resolution crystal structures of 40 proteins and their characteristic (13)C isotropic NMR chemical shifts. From comparison of the observed Tyr C(alpha) and Tyr C(beta) chemical shifts with those predicted by the contour plots, there is strong evidence in favor of an antiparallel beta-sheet structure of the Tyr residues in the silk fibroin fibers. On the other hand, Tyr residues take a random coil conformation in the fibroin film with a silk I form. The Val residues are likely to assume a structure similar to those of Tyr residues in silk fiber and film. Solid-state (2)H NMR measurements of [3,3-(2)H(2)]Tyr-labeled B. mori silk fibroin indicate that the local mobility of the backbone and the C(alpha)-C(beta) bond is essentially "static" in both silk I and silk II forms. The orientation-dependent (i.e., parallel and perpendicular to the magnetic field) solid-state (15)N NMR spectra of biosynthetically labeled [(15)N]Tyr and [(15)N]Val silk fibers reveal the presence of highly oriented semicrystalline regions.