Search

The world is warming, and the demand for cooling is increasing. Developing a future green hydrogen economy will also increase the demand for cooling for hydrogen liquefaction. This increase in cooling demand will happen mainly in tropical and developing countries due to their increase in population, improvements in quality of life, and the export of their renewable potential with liquid hydrogen. To solve this increase in demand for cooling, this paper proposes the use of ammonia airship cooling (AAC). AAC extracts cold from the tropopause (−80 °C) with airships and ammonia refrigeration cycles. The liquid ammonia is then transported back to the surface to provide low temperature cooling services (−33 °C). This cooling service is particularly interesting for lowering the electricity consumption in hydrogen liquefaction plants. If all the technological challenges mentioned in the paper are addressed, it is estimated that the cost of cooling with the technology is 8.25 USD/MWht and that AAC could reduce the electricity demand for hydrogen liquefaction by 30%. AAC is an innovative renewable cooling technology that has the potential to complement other renewable energy sources in a sustainable future. [ABSTRACT FROM AUTHOR]

There is a significant energy transition in progress globally. This is mainly driven by the insertion of variable sources of energy, such as wind and solar power. To guarantee that the supply of energy meets its demand, energy storage technologies will play an important role in integrating these intermittent energy sources. Daily energy storage can be provided by batteries. However, there is still no technology that can provide weekly, monthly and seasonal energy storage services where pumped hydro storage is not a viable solution. Herein, we introduce an innovative energy storage proposal based on isothermal air compression/decompression and storage of the compressed air in the deep sea. Isothermal deep ocean compressed air energy storage (IDO-CAES) is estimated to cost from 1500 to 3000 USD/kW for installed capacity and 1 to 10 USD/kWh for energy storage. IDO-CAES should complement batteries, providing weekly, monthly and seasonal energy storage cycles in future sustainable energy grids, particularly in coastal areas, islands and offshore and floating wind power plants, as well as deep-sea mining activities. [ABSTRACT FROM AUTHOR]

Low-carbon energy transitions taking place worldwide are primarily driven by the integration of renewable energy sources such as wind and solar power. These variable renewable energy (VRE) sources require energy storage options to match energy demand reliably at different time scales. This article suggests using a gravitational-based energy storage method by making use of decommissioned underground mines as storage reservoirs, using a vertical shaft and electric motor/generators for lifting and dumping large volumes of sand. The proposed technology, called Underground Gravity Energy Storage (UGES), can discharge electricity by lowering large volumes of sand into an underground mine through the mine shaft. When there is excess electrical energy in the grid, UGES can store electricity by elevating sand from the mine and depositing it in upper storage sites on top of the mine. Unlike battery energy storage, the energy storage medium of UGES is sand, which means the self-discharge rate of the system is zero, enabling ultra-long energy storage times. Furthermore, the use of sand as storage media alleviates any risk for contaminating underground water resources as opposed to an underground pumped hydro storage alternative. UGES offers weekly to pluriannual energy storage cycles with energy storage investment costs of about 1 to 10 USD/kWh. The technology is estimated to have a global energy storage potential of 7 to 70 TWh and can support sustainable development, mainly by providing seasonal energy storage services. [ABSTRACT FROM AUTHOR]

Groundwater storage is an important water management solution that is overlooked by several countries worldwide. This paper evaluates the potential for storing water in the Bananal sedimentary basin and proposes the construction of canals to reduce sediment obstructions in the river flow and harmful flood events. This would allow for better control of the water level. The water stored in the sedimentary basin can be used as a climate change adaptation measure to ensure that the level of the flood plain is maintained high during a drought or low during an intense flood event. Additionally, the flood plain will function as a water reservoir, regulate the river flow downstream from the flood plain, and enhance hydropower generation. A significantly smaller reservoir area is expected to store water, as the water will be stored as groundwater in the sedimentary basin. Results show that the Bananal basin has the potential to store up to 49 km3 of water, which can add up to 11.7 TWh of energy storage to the Brazilian energy matrix for a CAPEX energy storage cost of 0.095 USD/kWh. This is an interesting solution for the Araguaia basin and several other basins worldwide. [ABSTRACT FROM AUTHOR]

Energy harnessing from renewable energy sources has become more flexible with power electronic technologies. Recent advancements in power electronic technologies achieve converter efficiency higher than 98%. Today, reliable power electronic devices are needed to design a PV-based energy converter (inverter) to reduce the risk of failure and maintenance costs during operation. Wide-bandgap SiC devices are becoming more common in power electronic converters. These devices are designed to reduce switching loss and improve the efficiency of the system. Nevertheless, the cost of SiC devices is a major concern. Hence, to improve the reliability of the PV inverter while considering the economic aspects, this paper develops a highly reliable PV inverter with a hybrid Si/SiC power module that consists of a Si-IGBT with a SiC anti-parallel diode. A test case of a 3 kW PV inverter is considered for reliability analysis. The loading of the PV inverter is done under uncertain environmental conditions by considering the yearly Mission Profile (MP) data related to Ambient Temperature (AT) and Solar Irradiance (SI) at the India and Denmark locations. The effectiveness of the proposed hybrid Si/SiC power module is tested by comparing it with a conventional IGBT power module. The results showcase the marked improvement in PV inverter reliability with the proposed hybrid power module. [ABSTRACT FROM AUTHOR]