Search

Medieval paper, a handmade product, is made with a mould which leaves an indelible imprint on the sheet of paper. This imprint includes chain lines, laid lines and watermarks which are often visible on the sheet. Extracting these features allows the identification of the paper stock and gives information about the chronology, localisation and movement of manuscripts and people. Most computational work for feature extraction of paper analysis has so far focused on radiography or transmitted light images. While these imaging methods provide clear visualisation of the features of interest, they are expensive and time consuming in their acquisition and not feasible for smaller institutions. However, reflected light images of medieval paper manuscripts are abundant and possibly cheaper in their acquisition. In this paper, we propose algorithms to detect and extract the laid and chain lines from reflected light images. We tackle the main drawback of reflected light images, that is, the low contrast attenuation of chain and laid lines and intensity jumps due to noise and degradation, by employing the spectral total variation decomposition and develop methods for subsequent chain and laid line extraction. Our results clearly demonstrate the feasibility of using reflected light images in paper analysis. This work enables feature extraction for paper manuscripts that have otherwise not been analysed due to a lack of appropriate images. We also open the door for paper stock identification at scale. [ABSTRACT FROM AUTHOR]

Traditional point cloud simplification methods are slow to process large point clouds and prone to losing small features, which leads to a large loss of point cloud accuracy. In this paper, a new point cloud simplification method using a three-step strategy is proposed, which realizes efficient reduction of large point clouds while preserving fine features through point cloud down-sampling, normal vector calibration, and feature extraction based on the proposed feature descriptors and neighborhood subdivision strategy. In this paper, we validate the method using measured point clouds of large co-bottomed component surfaces, visualize the errors, and compare it with other methods. The results demonstrate that this method is well-suited for efficiently reducing large point clouds, even those on the order of ten million points, while maintaining high accuracy in feature retention, refinement precision, efficiency, and robustness to noise. [ABSTRACT FROM AUTHOR]

Advances in computer image recognition have significantly impacted many industries, including healthcare, security and autonomous systems. This paper aims to explore the potential of improving image algorithms to enhance computer image recognition. Specifically, we will focus on regression methods as a means to improve the accuracy and efficiency of identifying images. In this study, we will analyze various regression techniques and their applications in computer image recognition, as well as the resulting performance improvements through detailed examples and data analysis. This paper deals with the problems related to visual image processing in outdoor unstructured environment. Finally, the heterogeneous patterns are converted into the same pattern, and the heterogeneous patterns are extracted from the fusion features of data modes. The simulation results show that the perception ability and recognition ability of outdoor image recognition in complex environment are improved. [ABSTRACT FROM AUTHOR]

Background: Emotion is a complex phenomenon that greatly affects human behavior and thinking in daily life. Electroencephalography (EEG), one of the human physiological signals, has been emphasized by most researchers in emotion recognition as its specific properties are closely associated with human emotion. However, the number of human emotion recognition studies using computer games as stimuli is still insufficient as there were no relevant publicly available datasets provided in the past decades. Most of the recent studies using the Gameemo public dataset have not clarified the relationship between the EEG signal's changes and the emotion elicited using computer games. Thus, this paper is proposed to introduce the use of data mining techniques in investigating the relationships between the frequency changes of EEG signals and the human emotion elicited when playing different kinds of computer games. The data acquisition stage, data pre-processing, data annotation and feature extraction stage were designed and conducted in this paper to obtain and extract the EEG features from the Gameemo dataset. The cross-subject and subject-based experiments were conducted to evaluate the classifiers' performance. The top 10 association rules generated by the RCAR classifier will be examined to determine the possible relationship between the EEG signal's frequency changes and game-induced emotions. Results: The RCAR classifier constructed for cross-subject experiment achieved highest accuracy, precision, recall and F1-score evaluated with over 90% in classifying the HAPV, HANV and LANV game-induced emotions. The 20 experiment cases' results from subject-based experiments supported that the SVM classifier could accurately classify the 4 emotion states with a kappa value over 0.62, demonstrating the SVM-based algorithm's capabilities in precisely determining the emotion label for each participant's EEG features' instance. Conclusion: The findings in this study fill the existing gap of game-induced emotion recognition field by providing an in-depth evaluation on the ruleset algorithm's performance and feasibility of applying the generated rules on the game-induced EEG data for justifying the emotional state prediction result. [ABSTRACT FROM AUTHOR]

The object scale of a small object scene changes greatly, and the object is easily disturbed by a complex background. Generic object detectors do not perform well on small object detection tasks. In this paper, we focus on small object detection based on FocusDet. FocusDet refers to the small object detector proposed in this paper. It consists of three parts: backbone, feature fusion structure, and detection head. STCF-EANet was used as the backbone for feature extraction, the Bottom Focus-PAN for feature fusion, and the detection head for object localization and recognition.To maintain sufficient global context information and extract multi-scale features, the STCF-EANet network backbone is used as the feature extraction network.PAN is a feature fusion module used in general object detectors. It is used to perform feature fusion on the extracted feature maps to supplement feature information.In the feature fusion network, FocusDet uses Bottom Focus-PAN to capture a wider range of locations and lower-level feature information of small objects.SIOU-SoftNMS is the proposed algorithm for removing redundant prediction boxes in the post-processing stage. SIOU multi-dimension accurately locates the prediction box, and SoftNMS uses the Gaussian algorithm to remove redundant prediction boxes. FocusDet uses SIOU-SoftNMS to address the missed detection problem common in dense tiny objects.The VisDrone2021-DET and CCTSDB2021 object detection datasets are used as benchmarks, and tests are carried out on VisDrone2021-det-test-dev and CCTSDB-val datasets. Experimental results show that FocusDet improves mAP@.5% from 33.6% to 46.7% on the VisDrone dataset. mAP@.5% on the CCTSDB2021 dataset is improved from 81.6% to 87.8%. It is shown that the model has good performance for small object detection, and the research is innovative. [ABSTRACT FROM AUTHOR]

Forest fire is natural disasters that are sudden, destructive and difficult to handle and rescue, with millions of hectares of forests burned every year all over the world, causing serious ecological damage, loss of life and property. Therefore, timely detection and treatment of early fire is of positive and important significance for forest fire early control. The fire detection method based on image processing is one of the most important means of preventing the occurrence of large-scale forest fires at present by extracting the flame and smoke features in the image and quickly determining the location of the fire. The current deep learning-based forest fire early detection methods have problems such as high false alarm rate due to small detection targets and complex environmental background, and large number of detection model parameters. In view of this, this paper proposes a lightweight early forest fire and smoke detection method based on GS-YOLOv5. Firstly, this paper proposes a novel Super-SPPF structure to replace the SPPF structure in YOLOv5, by which the output of the feature extraction network is used as input, and the input is divided into two branches to retain more semantic information, and the GhostConv operation is performed separately to reduce the number of model parameters. The Super-SPPF structure performs the serial MaxPooling operation on one of the branches, which improves the computation speed by choosing a smaller pooling kernel, and then fuses the outputs of the two branches to reduce the false alarm rate of the detection model. Secondly, C3Ghost is utilized instead of the C3 module in YOLOv5 to further reduce the number of detection model parameters. Finally, the coordinate attention (CA) module is introduced in backbone of YOLOv5 to obtain the relationship between channels and space, which enables the network to obtain the location information of interest more accurately and further improves the detection accuracy of early fires. In this paper, a self-constructed DL-Fire dataset is used to verify the performance of the GS-YOLOv5 detection model by collecting environmental interference samples and combining them with the D-Fire dataset. The experimental results show that the detection accuracy of GS-YOLOv5 is 95.9%, and the model size is 10.58 mb. Compared with YOLOv5, false alarm rate is reduced from 12% to 6% and computational complexity is reduced from 16.0 GFlops to 12.8 GFlops by GS-YOLOv5. [ABSTRACT FROM AUTHOR]

With a significant number of mechanical products approaching the retirement phase, the batch recycling of discarded mechanical parts necessitates a preliminary assessment of their surface condition. However, the presence of surface rust poses a challenge to defect identification. Therefore, this paper proposes a method for detecting heavily rusted surface defects based on an improved YOLOv8n network. In the Backbone, the C2f-DBB module of re-parameterized deep feature extraction was introduced, and the attention module was designed to improve the accuracy of information extraction. In the Neck part, a Bi-Afpn multiscale feature fusion strategy is designed to facilitate information exchange between features at different scales. Finally, Focal-CIoU is employed as the bounding box loss function to enhance the network's localization performance and accuracy for defects. Experimentally, it is proved that the improved network in this paper improves the Recall, Precision, and mAP0.5 by 1.2%, 2.1%, and 1.9%, respectively, on the original basis, which is better than other network models. [ABSTRACT FROM AUTHOR]

Existing biohashing authentication schemes usually store bioinformation in the cloud, whose storage method can face the problems of bioinformation leakage and tampering, and single point of failure. To address the above problems, a ciphertext speech biohashing authentication scheme based on chaotic system and improved public chain is proposed. First, the fusion features are extracted and generated with the inner product of 3D chaotic system to generate the biohashing sequence. Second, the original speech is encrypted and uploaded to the InterPlanetary file system and then, uploaded to the blockchain after the data are encrypted. Finally, the server matches the hash sequence queried on the chain with the to-be-authenticated hash at the user's end using the Hamming distance. The experimental results show that the biohashing algorithm in this paper has better distinguishability, robustness, security and time efficiency. The key space of the speech encryption algorithm is 2 256 , which can well resist the exhaustive attack and ensure the security during speech authentication. In this paper, the combination of on-chain and off-chain storage of speech information can prevent the problem of bioinformation leakage and tampering, as well as avoiding the problem of single point of failure. [ABSTRACT FROM AUTHOR]

Danmakus are user-generated comments that overlay on videos, enabling real-time interactions between viewers and video content. The emotional orientation of danmakus can reflect the attitudes and opinions of viewers on video segments, which can help video platforms optimize video content recommendation and evaluate users' abnormal emotion levels. Aiming at the problems of low transferability of traditional sentiment analysis methods in the danmaku domain, low accuracy of danmaku text segmentation, poor consistency of sentiment annotation, and insufficient semantic feature extraction, this paper proposes a video danmaku sentiment analysis method based on MIBE-RoBERTa-FF-BiLSTM. This paper constructs a "Bilibili Must-Watch List and Top Video Danmaku Sentiment Dataset" by ourselves, covering 10,000 positive and negative sentiment danmaku texts of 18 themes. A new word recognition algorithm based on mutual information (MI) and branch entropy (BE) is used to discover 2610 irregular network popular new words from trigrams to heptagrams in the dataset, forming a domain lexicon. The Maslow's hierarchy of needs theory is applied to guide the consistent sentiment annotation. The domain lexicon is integrated into the feature fusion layer of the RoBERTa-FF-BiLSTM model to fully learn the semantic features of word information, character information, and context information of danmaku texts and perform sentiment classification. Comparative experiments on the dataset show that the model proposed in this paper has the best comprehensive performance among the mainstream models for video danmaku text sentiment classification, with an F1 value of 94.06%, and its accuracy and robustness are also better than other models. The limitations of this paper are that the construction of the domain lexicon still requires manual participation and review, the semantic information of danmaku video content and the positive case preference are ignored. [ABSTRACT FROM AUTHOR]

In industry, the task of defect classification and defect localization is an important part of defect detection system. However, existing studies only focus on one task and it is difficult to ensure the accuracy of both tasks. This paper proposes a defect detection system based on improved Yolo_v4, which greatly improves the detection ability of minor defects. For K_Means algorithm clustering prianchors question with strong subjectivity, the paper proposes the Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm to determine the number of Anchors. To solve the problem of low detection rate of small targets caused by insufficient reuse rate of low-level features in CSPDarknet53 feature extraction network, this paper proposes an ECA-DenseNet-BC-121 feature extraction network to improve it. And the Dual Channel Feature Enhancement (DCFE) module is proposed to improve the local information loss and gradient propagation obstruction caused by quad chain convolution in PANet networks to improve the robustness of the model. The experimental results on the fabric surface defect detection datasets show that the mAP of the improved Yolo_v4 is 98.97%, which is 7.67% higher than SSD, 3.75% higher than Faster_RCNN, 10.82% higher than Yolo_v4 tiny, and 5.35% higher than Yolo_v4, and the detection speed reaches 39.4 fps. It can meet the real-time monitoring needs of industrial sites. [ABSTRACT FROM AUTHOR]

With the rapid development of information transfer technology and the influence of complex electromagnetic environment, the signal components in communication systems are becoming more and more complex, and the spectrum congestion is further aggravated, which seriously affects the performance of communication systems. Single-channel blind source separation technology is an effective solution, but the existing algorithms are deficient in terms of estimation accuracy, time delay and computational complexity. Based on the powerful feature extraction capability and timing signal processing capability of deep learning, this paper proposes an end-to-end time-domain blind separation convolutional network structure, including three parts: encoder, separation module and decoder. The attention mechanism module is also introduced into the encoding layer of the network to enhance the deep feature extraction ability of the network, highlight the influence of important timing features of communication signals, further improve the separation performance and enhance the practicality of the network. The experimental results show that the algorithm has superior performance and can effectively separate the mixed communication signal of various modulation types, and it can also extract own-side communication signals from high-power masked signals. Compared with the existing algorithms, the network in this paper has high separation accuracy and low computational complexity, which breaks the bottleneck of traditional single-channel blind separation algorithms in complex communication electromagnetic environment. [ABSTRACT FROM AUTHOR]

Automated and accurate detection of power quality (PQ) events is important from the point of view of safety as well as maintaining the reliability of the power transmission and distribution network. However, detection of multiple PQ events in a noisy environment is challenging task. Another important issue is the choice of meaningful features that can directly influence the accuracy of PQ detection. Considering these two aforesaid facts, this paper presents a novel framework for automated classification of PQ signals in a noisy environment employing cross Stockwell Transform (XST). The XST proposed in this paper has better noise suppression capability compared to conventional Stockwell Transform. Here, XST was used to convert 1D PQ signals to 2D time–frequency (T–F) images. To improve the accuracy of PQ detection, an automated feature extraction method employing deep learning is implemented in this work. The noise free T–F images obtained using XST were fed as inputs to several pre-trained convolutional neural networks (CNNs) for deep feature extraction. Transfer learning technique was implemented to reduce the computational cost. The extracted deep features were further undergone selection using one-way analysis of variance test followed by false discovery rate correction. The statistically significant deep features were subsequently fed to three benchmark machine learning classifiers for classification of PQ signals. In addition, tests were also carried out on real-life PQ signals to verify the practicability of the proposed framework. Investigations revealed that the proposed method returned mean accuracy of 99.72% and 96.45% for classification of simulated and real-life PQ signals, respectively. [ABSTRACT FROM AUTHOR]

Hepatitis C virus (HCV) is a major global health concern, affecting millions of individuals worldwide. While existing literature predominantly focuses on disease classification using clinical data, there exists a critical research gap concerning HCV genotyping based on genomic sequences. Accurate HCV genotyping is essential for patient management and treatment decisions. While the neural models excel at capturing complex patterns, they still face challenges, such as data scarcity, that exist a lot in computational genomics. To overcome this challenges, this paper introduces an advanced deep learning approach for HCV genotyping based on the graphical representation of nucleotide sequences that outperforms classical approaches. Notably, it is effective for both partial and complete HCV genomes and addresses challenges associated with imbalanced datasets. In this work, ten HCV genotypes: 1a, 1b, 2a, 2b, 2c, 3a, 3b, 4, 5, and 6 were used in the analysis. This study utilizes Chaos Game Representation for 2D mapping of genomic sequences, employing self-supervised learning using convolutional autoencoder for deep feature extraction, resulting in an outstanding performance for HCV genotyping compared to various machine learning and deep learning models. This baseline provides a benchmark against which the performance of the proposed approach and other models can be evaluated. The experimental results showcase a remarkable classification accuracy of over 99%, outperforming traditional deep learning models. This performance demonstrates the capability of the proposed model to accurately identify HCV genotypes in both partial and complete sequences and in dealing with data scarcity for certain genotypes. The results of the proposed model are compared to NCBI genotyping tool. [ABSTRACT FROM AUTHOR]

The intelligent appearance quality classification method for Auricularia auricula is of great significance to promote this industry. This paper proposes an appearance quality classification method for Auricularia auricula based on the improved Faster Region-based Convolutional Neural Networks (improved Faster RCNN) framework. The original Faster RCNN is improved by establishing a multiscale feature fusion detection model to improve the accuracy and real-time performance of the model. The multiscale feature fusion detection model makes full use of shallow feature information to complete target detection. It fuses shallow features with rich detailed information with deep features rich in strong semantic information. Since the fusion algorithm directly uses the existing information of the feature extraction network, there is no additional calculation. The fused features contain more original detailed feature information. Therefore, the improved Faster RCNN can improve the final detection rate without sacrificing speed. By comparing with the original Faster RCNN model, the mean average precision (mAP) of the improved Faster RCNN is increased by 2.13%. The average precision (AP) of the first-level Auricularia auricula is almost unchanged at a high level. The AP of the second-level Auricularia auricula is increased by nearly 5%. And the third-level Auricularia auricula AP is increased by 1%. The improved Faster RCNN improves the frames per second from 6.81 of the original Faster RCNN to 13.5. Meanwhile, the influence of complex environment and image resolution on the Auricularia auricula detection is explored. [ABSTRACT FROM AUTHOR]

Historically, the analysis of stimulus-dependent time–frequency patterns has been the cornerstone of most electroencephalography (EEG) studies. The abnormal oscillations in high-frequency waves associated with psychotic disorders during sensory and cognitive tasks have been studied many times. However, any significant dissimilarity in the resting-state low-frequency bands is yet to be established. Spectral analysis of the alpha and delta band waves shows the effectiveness of stimulus-independent EEG in identifying the abnormal activity patterns of pathological brains. A generalized model incorporating multiple frequency bands should be more efficient in associating potential EEG biomarkers with first-episode psychosis (FEP), leading to an accurate diagnosis. We explore multiple machine-learning methods, including random-forest, support vector machine, and Gaussian process classifier (GPC), to demonstrate the practicality of resting-state power spectral density (PSD) to distinguish patients of FEP from healthy controls. A comprehensive discussion of our preprocessing methods for PSD analysis and a detailed comparison of different models are included in this paper. The GPC model outperforms the other models with a specificity of 95.78% to show that PSD can be used as an effective feature extraction technique for analyzing and classifying resting-state EEG signals of psychiatric disorders. [ABSTRACT FROM AUTHOR]

Blinding eye diseases are often related to changes in retinal structure, which can be detected by analysing retinal blood vessels in fundus images. However, existing techniques struggle to accurately segment these delicate vessels. Although deep learning has shown promise in medical image segmentation, its reliance on specific operations can limit its ability to capture crucial details such as the edges of the vessel. This paper introduces LMBiS-Net, a lightweight convolutional neural network designed for the segmentation of retinal vessels. LMBiS-Net achieves exceptional performance with a remarkably low number of learnable parameters (only 0.172 million). The network used multipath feature extraction blocks and incorporates bidirectional skip connections for the information flow between the encoder and decoder. In addition, we have optimised the efficiency of the model by carefully selecting the number of filters to avoid filter overlap. This optimisation significantly reduces training time and improves computational efficiency. To assess LMBiS-Net's robustness and ability to generalise to unseen data, we conducted comprehensive evaluations on four publicly available datasets: DRIVE, STARE, CHASE_DB1, and HRF The proposed LMBiS-Net achieves significant performance metrics in various datasets. It obtains sensitivity values of 83.60%, 84.37%, 86.05%, and 83.48%, specificity values of 98.83%, 98.77%, 98.96%, and 98.77%, accuracy (acc) scores of 97.08%, 97.69%, 97.75%, and 96.90%, and AUC values of 98.80%, 98.82%, 98.71%, and 88.77% on the DRIVE, STARE, CHEASE_DB, and HRF datasets, respectively. In addition, it records F1 scores of 83.43%, 84.44%, 83.54%, and 78.73% on the same datasets. Our evaluations demonstrate that LMBiS-Net achieves high segmentation accuracy (acc) while exhibiting both robustness and generalisability across various retinal image datasets. This combination of qualities makes LMBiS-Net a promising tool for various clinical applications. [ABSTRACT FROM AUTHOR]

Lung cancer is an uncontrolled growth of tissue causing a lump in the human lung. If lung cancer can be detected early, it can increase the survival rate. Therefore, a multi-classification approach of lung nodule detection with high computational effectiveness is required. In this paper, a multi-classification approach of lung nodule detection and classification is proposed using artificial intelligence on computed tomography (CT) scan images. Different preprocessing steps are applied for resizing, smoothing, and enhancement of the CT images. Then, two different approaches for feature extraction using VGG16 transfer learning and morphological segmentation are proposed. Morphological segmentation and feature extraction are applied for the segmentation of the region of interest and to extract the distinct features. Finally, the proposed deep learning architecture and seven different machine learning algorithms are applied on the preprocessed data and the extracted features for the classification of lung nodules into three classes: malignant, benign, and normal. It is observed that the stacked ensemble model of deep learning convolutional neural network (CNN) and VGG16 transfer learning models (CNN+VGG16) can achieve 99.55% accuracy using preprocessed data. It is also observed that all the ML algorithms perform with reasonably high accuracy using the low-dimensional morphological features. It is observed from the fivefold cross-validation results that logistic regression performs with 99.36% accuracy in 23.71 s time using the preprocessed data. Whereas, using the morphological features, k-nearest neighbor, and the support vector machine perform with the highest accuracy of 99.76% with very reduced computational time of 0.017 and 0.008 s, respectively. [ABSTRACT FROM AUTHOR]

Film cooling is an effective technology for improving the thrust-to-weight ratio of an aero-engine. The axial orientation of film cooling holes is one of the key factors determining the film cooling effect. However, the machining quality of cooling holes is still carried out by manual inspection, whose accuracy and consistency cannot be guaranteed. To address this problem, this paper proposes an axial orientation extraction algorithm based on laser point cloud processing. Firstly, the blade surface is scanned by a line laser sensor and a blade point cloud is obtained. Secondly, a single film hole can be segmented from the blade point cloud based on scanning line fitting residual. Thirdly, an improved Gaussian map is to complement the arc belt obtained by Gaussian map to obtain a complete circle along an error-sensitive direction. Finally, the axial orientation is estimated by random sample consensus with an initial value. The accuracy and consistency of the algorithm are verified by comparing the extraction result by the algorithm with those by the Geomagic software. The result shows that the axial accuracy extracted by the algorithm can reach 0.405°. [ABSTRACT FROM AUTHOR]

Ancient murals have suffered from continuous damage over time, and especially paint loss disease. Therefore, disease labeling, as the basis for ancient mural restoration, plays an important role in the protection of cultural relics. The predominant method of disease labeling is currently manual labeling, which is highly dependent on expert experience, time consuming, inefficient and results in inconsistent accuracy of the marking effect. In this paper, we propose a labeling framework for paint loss disease of ancient murals based on hyperspectral image classification and segmentation. The proposed framework involves first the extraction of features from the hyperspectral image, and then image segmentation is performed based on the spatial features to obtain more accurate region boundaries. Then, the hyperspectral image's regions are classified based on their spatial-spectral characteristics, and the candidate areas of paint loss disease are obtained. Finally, by leveraging the true color image segmentation results, the proposed disease labeling strategy combines the results of classification and segmentation to propose the final paint loss disease labeling areas. The experimental results show that the proposed method can not only combine the hyperspectral space and spectral information effectively to obtain accurate labeling of paint loss disease, but can also mark the paint loss disease not easily observed using ordinary digital cameras. Compared with the state-of-the-art methods, the proposed framework could be promising for accurate and effective paint loss disease labeling for ancient murals. [ABSTRACT FROM AUTHOR]

Generally, the recognition performance of lightweight models is often lower than that of large models. Knowledge distillation, by teaching a student model using a teacher model, can further enhance the recognition accuracy of lightweight models. In this paper, we approach knowledge distillation from the perspective of intermediate feature-level knowledge distillation. We combine a cross-stage feature fusion symmetric framework, an attention mechanism to enhance the fused features, and a contrastive loss function for teacher and student models at the same stage to comprehensively implement a multistage feature fusion knowledge distillation method. This approach addresses the problem of significant differences in the intermediate feature distributions between teacher and student models, making it difficult to effectively learn implicit knowledge and thus improving the recognition accuracy of the student model. Compared to existing knowledge distillation methods, our method performs at a superior level. On the CIFAR100 dataset, it boosts the recognition accuracy of ResNet20 from 69.06% to 71.34%, and on the TinyImagenet dataset, it increases the recognition accuracy of ResNet18 from 66.54% to 68.03%, demonstrating the effectiveness and generalizability of our approach. Furthermore, there is room for further optimization of the overall distillation structure and feature extraction methods in this approach, which requires further research and exploration. [ABSTRACT FROM AUTHOR]

In this paper, a method based on transfer learning is proposed to recover the three-dimensional shape of cultural relics faces from a single old photo. It can simultaneously reconstruct the three-dimensional facial structure and align the texture of the cultural relics with fewer training samples. The UV position map is used to represent the three-dimensional shape in space and act as the output of the network. A convolutional neural network is used to reconstruct the UV position map from a single 2D image. In the training process, the human face data is used for pre-training, and then a small amount of artifact data is used for fine-tuning. A deep learning model with strong generalization ability is trained with fewer artifact data, and a three-dimensional model of the cultural relic face can be reconstructed from a single old photograph. The methods can train more complex deep networks without a large amount of cultural relic data, and no over-fitting phenomenon occurs, which effectively solves the problem of fewer cultural relic samples. The method is verified by restoring a Chinese Terracotta Warrior with facial cracks and a Buddha with a broken nose. Other applications can be used in the fields such as texture recovery, facial feature extraction, and three-dimensional model estimation of the damaged cultural relics or sculptures in the photos. [ABSTRACT FROM AUTHOR]

Tabular data analysis is a critical task in various domains, enabling us to uncover valuable insights from structured datasets. While traditional machine learning methods can be used for feature engineering and dimensionality reduction, they often struggle to capture the intricate relationships and dependencies within real-world datasets. In this paper, we present Multi-representation DeepInsight (MRep-DeepInsight), a novel extension of the DeepInsight method designed to enhance the analysis of tabular data. By generating multiple representations of samples using diverse feature extraction techniques, our approach is able to capture a broader range of features and reveal deeper insights. We demonstrate the effectiveness of MRep-DeepInsight on single-cell datasets, Alzheimer's data, and artificial data, showcasing an improved accuracy over the original DeepInsight approach and machine learning methods like random forest, XGBoost, LightGBM, FT-Transformer and L2-regularized logistic regression. Our results highlight the value of incorporating multiple representations for robust and accurate tabular data analysis. By leveraging the power of diverse representations, MRep-DeepInsight offers a promising new avenue for advancing decision-making and scientific discovery across a wide range of fields. [ABSTRACT FROM AUTHOR]

The magnetic flux leakage (MFL) technique is widely employed for nondestructive testing of ferromagnetic specimens and materials, including wire ropes, bridge cables, and pipelines. As regards the MFL testing, extracting features from MFL signals is crucial for defect recognition and estimation of corresponding widths. Deep learning has been extensively used for feature extraction, but it often performs inadequately on a small sample dataset. To address this limitation, this paper develops a network framework that combines the Wavelet Scattering Transform (WST) and Neural Networks (NN) for defect width estimation. The WST is a knowledge-based feature extraction technique with a structure similar to convolutional neural networks. It offers a translation-invariant representation of signal features using a redundant dictionary of wavelets. The NN then maps the WST feature representation to the defect width information. Experiments on real steel plates with defects are carried out to validate the effectiveness of the proposed framework. Quantitative comparisons of the experimental results demonstrate that the proposed framework achieves better estimation performance in handling MFL signals and has superiority in scenarios with limited training samples. [ABSTRACT FROM AUTHOR]

This research paper aims to ensure the reliable and efficient operation of grid-connected solid-state transformers (SSTs) by detecting and evaluating various undesirable operating conditions. The study considers different types of faults, including internal faults like open switches and open capacitors, external faults such as symmetrical and asymmetrical faults occurring at various locations of the SST, and abnormalities on the grid side known as sympathetic inrush conditions. To analyze these operating conditions, the secondary current of the high-frequency transformer is normalized and decomposed using the discrete wavelet transform (DWT) and wavelet packet transform (WPT). From the DWT and WPT decomposition at multiple levels, several statistical parameters are calculated. These statistical parameters are carefully selected from different decomposition levels to enhance the effectiveness of the detection algorithm utilizing DWT and WPT. In order to quickly identify and classify all operating conditions that impact the performance of the grid-connected SST, a three-layer feedforward artificial neural network (ANN) is employed, using the selected statistical features. The accuracy and efficiency of the ANN-based classification approach are evaluated by assessing the effectiveness of the statistical features obtained from DWT and WPT. Simulation results have been altered by introducing various noise levels to systematically assess the performance of the proposed algorithms. The average accuracy of the DWT-ANN algorithm stands at 97.89%, while the WPT-ANN algorithm achieves a slightly elevated accuracy level of 98.01%. This notable similarity in accuracy curtails from the careful selection of the wavelet function, decomposition level, and feature sets. [ABSTRACT FROM AUTHOR]

In remote sensing image fusion, the conventional Convolutional Neural Networks (CNNs) extract local features of the image through layered convolution, which is limited by the receptive field and struggles to capture global features. Transformer utilizes self-attention to capture long-distance dependencies in images, which has a global receptive field, but the computational cost for high-resolution images is excessively high. In response to the above issues, this paper draws inspiration from the FusionNet network, harnessing the local detail acquisition capability of CNNs and the global data procuring capacity of Transformer. It presents a novel method for remote sensing image sharpening named Guided Filtering-Cross Stage Partial Network-Transformer, abbreviated as GF-CSTNet. This solution unifies the strengths of Guided Filtering (GF), Cross Stage Partial Network (CSPNet), and Transformer. Firstly, this method utilizes GF to enhance the acquired remote sensing image data. The CSPNet and Transformer structures are then combined to further enhance fusion performance by leveraging their respective advantages. Subsequently, a Rep-Conv2Former method is designed to streamline attention and extract diverse receptive field features through a multi-scale convolution modulator block. Simultaneously, a reparameterization module is constructed to integrate the multiple branches generated during training into a unified branch during inference, thereby optimizing the model's inference speed. Finally, a residual learning module incorporating attention has been devised to augment the modeling and feature extraction capabilities of images. Experimental results obtained from the GaoFen-2 and WorldView-3 datasets demonstrate the effectiveness of the proposed GF-CSTNet approach. It effectively extracts detailed information from images while avoiding the problem of spectral distortion. [ABSTRACT FROM AUTHOR]

Effective management of dementia requires the timely detection of mild cognitive impairment (MCI). This paper introduces a multi-objective optimization approach for selecting EEG channels (and features) for the purpose of detecting MCI. Firstly, each EEG signal from each channel is decomposed into subbands using either variational mode decomposition (VMD) or discrete wavelet transform (DWT). A feature is then extracted from each subband using one of the following measures: standard deviation, interquartile range, band power, Teager energy, Katz's and Higuchi's fractal dimensions, Shannon entropy, sure entropy, or threshold entropy. Different machine learning techniques are used to classify the features of MCI cases from those of healthy controls. The classifier's performance is validated using leave-one-subject-out (LOSO) cross-validation (CV). The non-dominated sorting genetic algorithm (NSGA)-II is designed with the aim of minimizing the number of EEG channels (or features) and maximizing classification accuracy. The performance is evaluated using a publicly available online dataset containing EEGs from 19 channels recorded from 24 participants. The results demonstrate a significant improvement in performance when utilizing the NSGA-II algorithm. By selecting only a few appropriate EEG channels, the LOSO CV-based results show a significant improvement compared to using all 19 channels. Additionally, the outcomes indicate that accuracy can be further improved by selecting suitable features from different channels. For instance, by combining VMD and Teager energy, the SVM accuracy obtained using all channels is 74.24%. Interestingly, when only five channels are selected using NSGA-II, the accuracy increases to 91.56%. The accuracy is further improved to 95.28% when using only 8 features selected from 7 channels. This demonstrates that by choosing informative features or channels while excluding noisy or irrelevant information, the impact of noise is reduced, resulting in improved accuracy. These promising findings indicate that, with a limited number of channels and features, accurate diagnosis of MCI is achievable, which opens the door for its application in clinical practice. [ABSTRACT FROM AUTHOR]

Aiming at the problem of cartoon piracy and plagiarism, this paper proposes a method of cartoon copyright recognition based on character personality actions. This method can be used to compare the original cartoon actions with the action characteristics of pirated or copied cartoons to identify whether there is piracy or plagiarism. Firstly, an image preprocessing scheme for character extraction is designed. GrabCut interactive image segmentation algorithm was used to obtain cartoon characters, and then binarization and morphological processing were performed on the results. Secondly, a feature extraction scheme based on character profile, moving character and character pose is designed. By extracting the perimeter and area of the character contour, the length-to-width ratio of the smallest rectangle and the inclination angle of the contour, the character contour features are obtained. The three-dimensional coordinates are established by the central point position of the cartoon character in the two-dimensional image and the change of the character's zoom in and out, and the character's motion angle characteristics are calculated. By skeletonizing a character to obtain the pose characteristics, and using deburring operation to remove redundant branches, then extract the skeleton joint angle information. Finally, feature fusion is performed on the extracted features. The experimental results show that the proposed method breaks the limitation of the conventional single feature based recognition, and can better extract the character features including contour feature, motion feature and pose feature through multi-feature based extraction, so as to protect the cartoon copyright. [ABSTRACT FROM AUTHOR]

In order to solve the difficult portability problem of traditional non-invasive sleeping posture recognition algorithms arising from the production cost and computational cost, this paper proposes a sleeping posture recognition model focusing on human body structural feature extraction and integration of feature space and algorithms based on a specific air-spring mattress structure, called SPR-DE (SPR-DE is the Sleep Posture Recognition-Data Ensemble acronym form). The model combines SMR (SMR stands for Principle of Spearman Maximal Relevance) with horizontal and vertical division based on the barometric pressure signals in the human body's backbone region to reconstruct the raw pressure data into strongly correlated non-image features of the sleep postures in different parts and directions and construct the feature set. Finally, the recognit-ion of the two sleep postures is accomplished using the AdaBoost-SVM integrated classifier. SPR-DE is compared with the base and integrated classifiers to verify its performance. The experimental results show that the amount of significant features helps the algorithm to classify different sleeping patterns more accurately, and the f1 score of the SPR-DE model determined by the comparison experiments is 0.998, and the accuracy can reach 99.9%. Compared with other models, the accuracy is improved by 2.9% ~ 7.7%, and the f1-score is improved by 0.029 ~ 0.076. Therefore, it is concluded that the SMR feature extraction strategy in the SPR-DE model and the AdaBoost-SVM can achieve high accuracy and strong robustness in the task of sleep posture recognition in a small area, low-density air-pressure mattress, taking into account the comfort of the mattress structural design and the sleep posture recognition, integrated with the mattress adaptive adjustment system. [ABSTRACT FROM AUTHOR]

This paper proposes an approach to enhance the differentiation task between benign and malignant Breast Tumors (BT) using histopathology images from the BreakHis dataset. The main stages involve preprocessing, which encompasses image resizing, data partitioning (training and testing sets), followed by data augmentation techniques. Both feature extraction and classification tasks are employed by a Custom CNN. The experimental results show that the proposed approach using the Custom CNN model exhibits better performance with an accuracy of 84% than applying the same approach using other pretrained models, including MobileNetV3, EfficientNetB0, Vgg16, and ResNet50V2, that present relatively lower accuracies, ranging from 74 to 82%; these four models are used as both feature extractors and classifiers. To increase the accuracy and other performance metrics, Grey Wolf Optimization (GWO), and Modified Gorilla Troops Optimization (MGTO) metaheuristic optimizers are applied to each model separately for hyperparameter tuning. In this case, the experimental results show that the Custom CNN model, refined with MGTO optimization, reaches an exceptional accuracy of 93.13% in just 10 iterations, outperforming the other state-of-the-art methods, and the other four used pretrained models based on the BreakHis dataset. [ABSTRACT FROM AUTHOR]

Danmaku-enabled videos have revolutionized the way online users engage with and enjoy video content, and creating a dynamic and interactive atmosphere for users. In this paper, we investigate a new task of extract entity and relation on video-sync comments, which holds the potential to facilitate the creation of semantic-driven video knowledge graphs and video content analysis. However, the task is difficult since video-sync comments often contain intricate, ambiguous relationships, and their syntactic structure may be incomplete or inconsistent. One possible method is to extract relationships by using distant supervision or an external knowledge base system (Kbs). Regrettably, the domain of online videos suffers from a lack of comprehensive external KBs. To tackle the problem, we propose an innovative strategy that combines syntactic rule-based techniques with advanced pre-trained language models. We aim to encapsulate both syntactic cues and distinctive features within latent spaces. Our approach comprises two key facets. Firstly, we employ syntactic rules to extract open relations from the video-sync comments. Simultaneously, we introduce a BERT-based model that integrates relationship category constraints. This model not only fuses extraction features but also autonomously learns intricate relationships, enhancing the accuracy and granularity of the extraction process. For demonstration, we conduct experiments on large-scale danmaku data and results demonstrate that our proposed approach can achieve competitive performance. [ABSTRACT FROM AUTHOR]

The segmentation and extraction on color features can provide useful information for many different application domains. However, most of the existing image processing algorithms on feature extraction are gray image-based and consider only one-dimensional parameters. In order to carry out a fast and accurate color feature extraction, this paper proposes a color extraction algorithm by segmentation that is called a color extraction algorithm This algorithm is compared under different color distribution situations, and the extraction effect on color is also shown by the combination of the segmentation and feature extraction algorithms. Experimental results show that such segmentation algorithm has some advantages for color segmentation. In the fuzzy color image preprocessing, this paper gives the location method of region of interest. Moreover, compared with other existing extraction algorithms, the presented segmentation extraction algorithm in this paper not only has higher accuracy, shorter extraction time and stronger anti-interference ability, but also has better effect on more divergent color edge. Experimental evaluation of the proposed color extraction algorithm demonstrates dominance over existing algorithms for feature extraction. These researches in this paper provide a new way of thinking for color feature extraction by segmentation, which has an important theoretical references and practical significance. [ABSTRACT FROM AUTHOR]

With the increasing number and types of global power loads and the development and popularization of smart grid technology, a large number of researches on load-level non-intrusive load monitoring technology have emerged. However, the unique power characteristics of the load make NILM face the difficult problem of low robustness of feature extraction and low accuracy of classification and identification in the recognition stage. This paper proposes a structured V-I mapping method to address the inherent limitations of traditional V-I trajectory mapping methods from a new perspective. In addition, for the verification of the V-I trajectory mapping method proposed in this paper, the complexity of load characteristics is comprehensively considered, and a lightweight convolutional neural network is designed based on AlexNet. The experimental results on the NILM dataset show that the proposed method significantly improves recognition accuracy compared to existing VI trajectory mapping methods. [ABSTRACT FROM AUTHOR]

Power quality disturbance (PQD) is an important problem affecting the safe and stable operation of power system. Traditional single modal methods not only have a large number of parameters, but also usually focus on only one type of feature, resulting in incomplete information about the extracted features, and it is difficult to identify complex and diverse PQD types in modern power systems. In this regard, this paper proposes a multi-modal parallel feature extraction and classification model. The model pays attention to both temporal and spatial features of PQD, which effectively improves classification accuracy. And a lightweight approach is adopted to reduce the number of parameters of the model. The model uses Long Short Term Memory Neural Network (LSTM) to extract the temporal features of one-dimensional temporal modes of PQD. At the same time, a lightweight residual network (LResNet) is designed to extract the spatial features of the two-dimensional image modality of PQD. Then, the two types of features are fused into multi-modal spatio-temporal features (MSTF). Finally, MSTF is input to a Support Vector Machine (SVM) for classification. Simulation results of 20 PQD signals show that the classification accuracy of the multi-modal model proposed in this paper reaches 99.94%, and the parameter quantity is only 0.08 MB. Compared with ResNet18, the accuracy of the proposed method has been improved by 2.55% and the number of parameters has been reduced by 99.25%. [ABSTRACT FROM AUTHOR]

Multimedia data have increased dramatically today, making the distinction between desirable information and other types of information extremely important. Speech/music discrimination is a field of audio analytics that aims to detect and classify speech and music segments in an audio file. This paper proposes a novel feature extraction method called Long-Term Multi-band Frequency-Domain Mean-Crossing Rate (FDMCR). The proposed feature computes the average frequency-domain mean-crossing rate along the frequency axis for each of the perceptual Mel-scaled frequency bands of the signal power spectrum. In this paper, the class-separation capability of this feature is first measured by well-known divergence criteria such as Maximum Fisher Discriminant Ratio (MFDR), Bhattacharyya divergence, and Jeffreys/Symmetric Kullback–Leibler (SKL) divergence. The proposed feature is then applied to the speech/music discrimination (SMD) process on two well-known speech-music datasets—GTZAN and S &S (Scheirer and Slaney). The results obtained on the two datasets using conventional classifiers, including k-NN, GMM, and SVM, as well as deep learning-based classification methods, including CNN, LSTM, and BiLSTM, show that the proposed feature outperforms other features in speech/music discrimination. [ABSTRACT FROM AUTHOR]

Freehand sketching on a paper is commonly found to be used as it is a natural and intuitive communication channel for portraying ideas. Additional strokes are often drawn over the existing ones to make the sketch clearer. For its usefulness in subsequent steps, a sketch is transformed to be a 3D CAD model that is typically performed manually by a designer due to a lack of technology support. Geometrical reconstruction from an offline scanning of a sketch has been a challenge because enriched information obtained during sketching is reduced to a batch of data points. This paper presents an algorithm for identifying a single-line drawing from a paper-based overtraced sketch as it is the first important step towards geometrical reconstruction. Key activities in this approach are thick-line sketch creation, contour boundary extraction, segments identification, and line drawing creation. The algorithm has been successfully implemented on LabVIEW and tested with several samples. [ABSTRACT FROM AUTHOR]

Objectives: Cytogenetic abnormalities are predictors of poor prognosis in multiple myeloma (MM). This paper aims to build and validate a multiparametric conventional and functional whole-body MRI-based prediction model for cytogenetic risk classification in newly diagnosed MM. Methods: Patients with newly diagnosed MM who underwent multiparametric conventional whole-body MRI, spinal dynamic contrast-enhanced (DCE-)MRI, spinal diffusion-weighted MRI (DWI) and had genetic analysis were retrospectively included (2011–2020/Ghent University Hospital/Belgium). Patients were stratified into standard versus intermediate/high cytogenetic risk groups. After segmentation, 303 MRI features were extracted. Univariate and model-based methods were evaluated for feature and model selection. Testing was performed using receiver operating characteristic (ROC) and precision-recall curves. Models comparing the performance for genetic risk classification of the entire MRI protocol and of all MRI sequences separately were evaluated, including all features. Four final models, including only the top three most predictive features, were evaluated. Results: Thirty-one patients were enrolled (mean age 66 ± 7 years, 15 men, 13 intermediate-/high-risk genetics). None of the univariate models and none of the models with all features included achieved good performance. The best performing model with only the three most predictive features and including all MRI sequences reached a ROC-area-under-the-curve of 0.80 and precision-recall-area-under-the-curve of 0.79. The highest statistical performance was reached when all three MRI sequences were combined (conventional whole-body MRI + DCE-MRI + DWI). Conventional MRI always outperformed the other sequences. DCE-MRI always outperformed DWI, except for specificity. Conclusions: A multiparametric MRI-based model has a better performance in the noninvasive prediction of high-risk cytogenetics in newly diagnosed MM than conventional MRI alone. Critical relevance statement: An elaborate multiparametric MRI-based model performs better than conventional MRI alone for the noninvasive prediction of high-risk cytogenetics in newly diagnosed multiple myeloma; this opens opportunities to assess genetic heterogeneity thus overcoming sampling bias. Key points: • Standard genetic techniques in multiple myeloma patients suffer from sampling bias due to tumoral heterogeneity. • Multiparametric MRI noninvasively predicts genetic risk in multiple myeloma. • Combined conventional anatomical MRI, DCE-MRI, and DWI had the highest statistical performance to predict genetic risk. • Conventional MRI alone always outperformed DCE-MRI and DWI separately to predict genetic risk. DCE-MRI alone always outperformed DWI separately, except for the parameter specificity to predict genetic risk. • This multiparametric MRI-based genetic risk prediction model opens opportunities to noninvasively assess genetic heterogeneity thereby overcoming sampling bias in predicting genetic risk in multiple myeloma. [ABSTRACT FROM AUTHOR]

Medical image fusion aims to fuse multiple images from a single or multiple imaging modes to enhance their corresponding clinical applications in diagnosing and evaluating medical problems, a trend that has attracted increasing attention. However, most recent medical image fusion methods require prior knowledge, making it difficult to select image features. In this paper, we propose a novel deep medical image fusion method based on a deep convolutional neural network (DCNN) for directly learning image features from original images. Specifically, source images are first decomposed by low rank representation to obtain the principal and salient components, respectively. Following that, the deep features are extracted from the decomposed principal components via DCNN and fused by a weighted-average rule. Then, considering the complementary between the salient components obtained by the low rank representation, a simple yet effective sum rule is designed to fuse the salient components. Finally, the fused result is obtained by reconstructing the principal and salient components. The experimental results demonstrate that the proposed method outperforms several state-of-the-art medical image fusion approaches in terms of both objective indices and visual quality. [ABSTRACT FROM AUTHOR]

In this paper, a novel method is introduced to diagnose the cardiac arrhythmias. Automatic diagnosis of cardiac arrhythmias is crucial for successful treatment of heart diseases, and nowadays, machine learning is used to facilitate this purpose. For accurate classification of arrhythmias, it is vital to extract some appropriate features which distinguish different classes. In this research, a deep convolutional neural network is used to extract the features. Since the heart rates of various patients are very different, arrhythmias of a specific class will be placed in different locations of feature space. To reduce the intra-class variations, each patient's heart rate is mapped with a dedicated function to increase its similarity to the heart rate of a training patient. The proposed patient-specific mapping decreases the intra-class variation and significantly increases the classification accuracy of cardiac arrhythmias. The calculated accuracy is about 91.08%, which shows the better performance compared to other similar works. [ABSTRACT FROM AUTHOR]

Denoising electrocardiogram (ECG) signals is a challenge because of the unavoidable artifacts. In this paper, an adaptive and effective signed error normalized least mean square algorithm (SE-NLMS) is proposed to improve denoising and reduce the mean square error (MSE). The performance of the SE-NLMS algorithm with unfolding technique (SE-UNLMS) has been compared with that of the normalized least mean square algorithm with unfolding structure (UNLMS) as well as the least mean square algorithm with unfolding structure (ULMS). SE-NLMS has the advantage of NLMS, namely an adaptive convergence rate and reduced computational complexity. We have implemented all three algorithms, namely LMS, NLMS and SE-NLMS, using an unfolding architecture that offers minimum delay and is suitable for real-time applications. Performance metrics such as an MSE of 0.0062 and a signal-to-noise ratio (SNR) improvement of about 10.2% are achieved through the proposed method of SE-UNLMS compared to other denoising methods. Additionally, exploration has been carried out for the application of denoised ECG signals under various arrhythmia conditions. The time-domain features were extracted from various denoised ECG signals and classified with support vector machines (SVM) to yield a good classification accuracy of 96.5%. The SE-UNLMS denoising method is demonstrated to be a valuable implementation for the detection and diagnosis of arrhythmias in real-world medical situations via this classification process. For real-time validation, the proposed method SE-UNLMS was implemented on a field-programmable gate array (FPGA) using Spartan 6 VPTB-20. The FPGA implementation highlights the feasibility of the proposed SE-UNLMS for real-time ECG monitoring applications. [ABSTRACT FROM AUTHOR]

The unsupervised anomaly detection in high-dimensional and complex settings poses a formidable challenge. To tackle the challenges associated with the recognition of high-dimensional data, this paper proposes a feedback channel between the Variational Auto Encoder and the Gaussian process to enhance its data feature extraction capabilities. In order to alleviate the impact of common mislabeling issues within unsupervised contexts, the proposed model introduces a method for the selection of representative data. Subsequently, these representative data points are employed as anchors for the construction of a full-data Gaussian process model covering the entire dataset. To further disentangle the intertwined normal and abnormal data, the proposed model employs a Bayesian framework to guide the displacement of each data point within the latent space toward its position with the highest confidence. This strategic approach effectively discriminates between normal and abnormal data. This innovative method significantly enhances data consolidation within the latent space, thus preserving robustness, particularly when processing high-complexity data. Also, the numerical experiments not only validate the method's effectiveness but also showcase the model's robustness. These experiments highlight that even a small number of incorrect labels do not significantly impact the accuracy of anomaly detection. [ABSTRACT FROM AUTHOR]

With the rapid development of artificial intelligence and Internet of Things (IoT) technology, increasingly edge devices have entered people's daily lives. However, due to the limited performance of edge devices, complex models can affect the response speed and efficiency of the whole system. Existing research still cannot simultaneously satisfy the demand for accuracy and response speed of edge devices. This paper proposes a lightweight and highly accurate object detection model that uses the Transformer to address edge devices' limited computational capacity and storage space. Specifically, the proposed model adopts the Swin Transformer for multi-scale feature extraction to achieve better global modeling capability. In addition, we propose the Neck module with path aggregation network (PAN), which is designed with a two-feature pyramid structure capable of combining semantic and localization information in order to improve the operational performance by exploiting the underlying location features. A lightweight detection head is then developed using group convolution, fusing the two localization branches and removes the additional decoupling operation. Finally, we conduct comparative experiments on three datasets: the Retail-cabinet dataset, the Roadsign dataset, and the Pascal VOC dataset. Experimental results show that compared with the baseline model, our model achieves an 11.8% improvement in mAP on the Retail-cabinet dataset while reducing Params and FLOPs by 23.19% and 71.50%, respectively. The proposed model effectively reduces the model's computational complexity and improves detection performance, thereby possessing high practical value. This code is released on https://github.com/ydlam/ST-YOLOX. [ABSTRACT FROM AUTHOR]

Lithium-ion batteries are becoming more popular due to their superior performance like high power density, long lifespan, broad operating range of temperatures, quick charging capabilities, and low self-discharge. The implementation of a Battery Management System (BMS) is crucial in order to guarantee the secure and optimal functioning of electric vehicle batteries. BMS monitors, controls, and maintains the health and performance of rechargeable batteries by monitoring the State of Charge (SoC), State of Health (SoH), and State of Temperature (SoT). SoC quantifies the amount of energy stored in a battery at a certain moment, and it is employed to approximate the remaining distance that may be covered. SoH describe the overall health or state of a rechargeable battery. It reveals how well a battery performs in comparison to its original state. SoT estimation keeps the battery temperature within a safe range, allowing it to reach a higher age and safety, which is critical for battery reliability. In this paper SoC, SoH, SoT estimation models for a lithium-ion battery have been developed using an improved EP-based R110-BLSTM approach. The Emperor Penguin based Residual Network-110 incorporated Bidirectional Long-Short Term Memory (EP-based R110-BLSTM) is ideal for estimating SoC, SoH, and SoT and features great accuracy, a quick estimation speed, and strong generalization capabilities. However, Extreme Learning Machine performance is heavily reliant on proper feature extraction. In order to enhance estimate performance by extracting the best features, Simulated-Annealing-based Golden Eagle optimization is utilized. Electric vehicle drive cycles are used to test the model's resilience to temperature changes. MATLAB 2018b software is used in the execution of this research. The results demonstrate that the proposed model performs better in terms of accuracy and has lower SoC, SoH, and SoT error rates than existing models. A thorough comparison between the recommended model and existing methods is also made, further demonstrating the proposed model's superiority. [ABSTRACT FROM AUTHOR]

To improve the precision of defect categorization and localization in images, this paper proposes an approach for detecting surface defects in hot-rolled steel strips. The approach uses an improved YOLOv5 network model to overcome the issues of inadequate feature extraction capacity and suboptimal feature integration when identifying surface defects on steel strips. The proposed method achieves higher detection accuracy and localization precision, making it more competitive and applicable in real production. Firstly, the multi-scale feature fusion (MSF) strategy is utilized to fuse shallow and deep features effectively and enrich detailed information relevant to target defects. Secondly, the CSPLayer Res2Attention block (CRA block) residual module is introduced to reduce the loss of defect information during hierarchical transmission, thereby enhancing the extraction of fine-grained features and improving the perception of details and global features. Finally, the experimental results indicate that the mAP on the NEU-DET and GC10-DET datasets approaches 78.5% and 67.3%, respectively, which is 4.9% and 2.1% higher than that of the baseline. Meanwhile, it has higher precision and more precise localization capabilities than other methods. Furthermore, it also achieves 59.2% mAP on the APDDD dataset, indicating its potential for growth in further domains. [ABSTRACT FROM AUTHOR]

Wearable sensors are widely used in medical applications and human–computer interaction because of their portability and powerful privacy. Human activity identification based on sensor data plays a vital role in these fields. Therefore, it is important to improve the recognition performance of different types of actions. Aiming at the problems of insufficient time-varying feature extraction and gradient explosion caused by too many network layers, a time convolution network recognition model with attention mechanism (TCN-Attention-HAR) was proposed. The model effectively recognizes and emphasizes the key feature information. The ability of extracting temporal features from TCN (temporal convolution network) is improved by using the appropriate size of the receiver domain. In addition, attention mechanisms are used to assign higher weights to important information, enabling models to learn and identify human activities more effectively. The performance of the Open Data Set (WISDM, PAMAP2 and USC-HAD) is improved by 1.13%, 1.83% and 0.51%, respectively, compared with other advanced models, these results clearly show that the network model presented in this paper has excellent recognition performance. In the knowledge distillation experiment, the parameters of student model are only about 0.1% of those of teacher model, and the accuracy of the model has been greatly improved, and in the WISDM data set, compared with the teacher's model, the accuracy is 0.14% higher. [ABSTRACT FROM AUTHOR]

During the manufacturing process of printed circuit boards (PCBs), quality defects can occur, which can affect the performance and reliability of PCBs. Existing deep learning-based PCB defect detection methods are difficult to simultaneously achieve the goals of high detection accuracy, fast detection speed, and small number of parameters. Therefore, this paper proposes a PCB defect detection algorithm based on CDI-YOLO. Firstly, the coordinate attention mechanism (CA) is introduced to improve the backbone and neck network of YOLOv7-tiny, enhance the feature extraction capability of the model, and thus improve the accuracy of model detection. Secondly, DSConv is used to replace part of the common convolution in YOLOv7-tiny to achieve lower computing costs and faster detection speed. Finally, Inner-CIoU is used as the bounding box regression loss function of CDI-YOLO to speed up the bounding box regression process. The experimental results show that the method achieves 98.3% mAP on the PCB defect dataset, the detection speed is 128 frames per second (FPS), the parameters is 5.8 M, and the giga floating-point operations per second (GFLOPs) is 12.6 G. Compared with the existing methods, the comprehensive performance of this method has advantages. [ABSTRACT FROM AUTHOR]

Polyp detection is a challenging task in the diagnosis of Colorectal Cancer (CRC), and it demands clinical expertise due to the diverse nature of polyps. The recent years have witnessed the development of automated polyp detection systems to assist the experts in early diagnosis, considerably reducing the time consumption and diagnostic errors. In automated CRC diagnosis, polyp segmentation is an important step which is carried out with deep learning segmentation models. Recently, Vision Transformers (ViT) are slowly replacing these models due to their ability to capture long range dependencies among image patches. However, the existing ViTs for polyp do not harness the inherent self-attention abilities and incorporate complex attention mechanisms. This paper presents Polyp-Vision Transformer (Polyp-ViT), a novel Transformer model based on the conventional Transformer architecture, which is enhanced with adaptive mechanisms for feature extraction and positional embedding. Polyp-ViT is tested on the Kvasir-seg and CVC-Clinic DB Datasets achieving segmentation accuracies of 0.9891 ± 0.01 and 0.9875 ± 0.71 respectively, outperforming state-of-the-art models. Polyp-ViT is a prospective tool for polyp segmentation which can be adapted to other medical image segmentation tasks as well due to its ability to generalize well. [ABSTRACT FROM AUTHOR]

Microelectronics production failure analysis is an important step in improving product quality and development. In fact, the understanding of the failure mechanisms and therefore the implementation of corrective actions on the cause of the failure depend on the results of this analysis. These analyses are saved under textual features format. Then such data need first to be preprocessed and vectorized (converted to numeric). Second, to overcome the curse of dimensionality caused by the vectorisation process, a dimension reduction is applied. A two-stage variable selection and feature extraction is used to reduce the high dimensionality of a feature space. We are first interested in studying the potential of using an unsupervised variable selection technique, the genetic algorithm, to identify the variables that best demonstrate discrimination in the separation and compactness of groups of textual data. The genetic algorithm uses a combination of the K-means or Gaussian Mixture Model clustering and validity indices as a fitness function for optimization. Such a function improves both compactness and class separation. The second work looks into the feasibility of applying a feature extraction technique. The adopted methodology is a Deep learning algorithm based on variational autoencoder (VAE) for latent space disentanglement and Gaussian Mixture Model for clustering of the latent space for cluster identification. The last objective of this paper is to propose a new methodology based on the combination between variational autoencoder (VAE) for the latent space disentanglement, and genetic algorithm (GA) to find, in an unsupervised way, the latent variables allowing the best discrimination of clusters of failure analysis data. This methodology is called VAE-GA. Experiments on textual datasets of failure analysis demonstrate the effectiveness of the VAE-GA proposed method which allows better discrimination of textual classes compared to the use of GA or VAE separately or the combination of PCA with GA (PCA-GA) or a simple Auto-encoders with GA (AE-GA). [ABSTRACT FROM AUTHOR]

Ultrasonic X-scan testing enables multiple equidistant layer scanning images along the direction of material thickness to obtain an overall characterization of material internal quality. However, ultrasonic sequential images produced by ultrasonic X-scan testing suffer from issues with low brightness, low contrast and poor clarity making it difficult to accurately characterize the internal quality of materials. In order to improve the characterization capabilities, an unsupervised enhancement network called UT_enhancenet is proposed in this paper. The UT_enhancenet combines correlated features of Bi-ConvLSTM with high-frequency features of Octconv to create encoding features. And then these features are input into decoder to generate high-quality sequential images. Simultaneously, an unsupervised loss function integrating content, brightness, and noise is constructed to guide the training of the neural network. To demonstrate the efficacy of the new method, sequential ultrasonic images of particle-reinforced metal matrix composites were enhanced by the new method. Consequently, an average particle detection rate of 91.3% and an average relative size error of 6.9% were observed across the three enhanced sequential image regions. The results indicate that the new method is significantly superior to the old methods. [ABSTRACT FROM AUTHOR]

In this paper, the vibration-based image representation and data fusion demonstrates distinctive benefit in feature extraction, yielding superior performance for damage identification in railway engineering. Specifically, based on vehicle-track coupled dynamics, the rail vibration datasets under diverse fastener damage conditions are generated. By converting 1-D vibration signals into 2-D grayscale images with recurrence plots (RPs) and the aid of conditional variational autoencoder (CVAE), the acceleration RPs and displacement RPs are fused for enhancing feature extraction. It is demonstrated that detecting the variation in texture patterns and color distribution of the vibration-based images facilitates effective damage identification, mitigating the sensitivity of damage recognition to the deterioration of track irregularity. The results show that the displacement RPs characterised by quasi-static features are more suitable for fastener damage identification. Further, by employing the data fusion that combines both the random dynamic features of the acceleration RPs and quasi-static features of the displacement RPs, the tolerance of measurement range for accurate fastener damage identification can be extended. The robustness of the proposed method is validated after testing different sampling frequencies and additional noise. [ABSTRACT FROM AUTHOR]

The presence of haze results in diminished image clarity, the loss of image details, color alterations, and a decline in image visibility. This paper proposes an efficient multi-stage feature fusion defogging network based on the attention mechanism for effective defogging in complex environments. To create a multi-branch defogging network, the model integrates several attention techniques to create various sorts of branching network architectures. The image's spatial details and contextual information are supplemented and merged based on the recovered image feature information of different network branches to increase the effectiveness of the network model. The stage attention fusion mechanism created among several network branches can lessen the loss of image data during feature extraction and improve the effectiveness of the image-defogging operation. The experimental results demonstrate that the proposed algorithm has superior defogging performance in both synthetic and real-world scene datasets and performs more admirably in terms of accuracy compared to other sophisticated algorithms, particularly in the RESIDE and O-Haze datasets. The PSNR metrics on the RESIDE and O-Haze datasets are improved by 1.58 dB and 1.61 dB, respectively, compared to the best-advanced technique suggested in this study, and the SSIM metrics on the O-Haze dataset are improved by 3.4%. [ABSTRACT FROM AUTHOR]