Search

The work is built on a previous research by Wiryana and Berg, in which wicking into four wet-formed paper stripes, consisting of cellulose fibers and four different percentages of the powdered carboxymethyl cellulose (CMC) superabsorbent, was studied experimentally. Because of the swelling of cellulose fibers and CMC powder on contact with water, the wicking was accompanied by a swelling of the matrix. A finite element/control volume (FE/CV)-based computer program is used for the first time to model the wicking in such swelling porous medium. The simulation used a novel form of continuity equation, which included the effects of liquid absorption and matrix swelling, in conjunction with the Darcy's law to model the single-phase flow behind a clearly defined liquid-front. A new method of estimating the time-varying permeability of the paper, based on the absorbed liquid-mass vs. time plots, is also proposed. Later, this time-dependent permeability is used in the numerical simulation to change the permeability in elements behind the moving liquid-front as a function of the time that the element has been wetted by the liquid, since the passage of the liquid-front. The numerical prediction of the wicking-front location as a function of time compares well with the reported experimental data. © 2011 American Institute of Chemical Engineers AIChE J, 58: 2536-2544, 2012 [ABSTRACT FROM AUTHOR]

Adsorption isotherms of 3 selected paper-based packaging materials, that is, vegetable parchment (VP) paper, Kraft paper, and solid-bleached-sulfate (SBS) paperboard, were determined at 3 different temperatures (25, 40, and 50 °C). The GAB isotherm model was found to fit adequately for describing experimental adsorption isotherm data for the paper samples. The monolayer moisture content of the paper samples decreased with increase in temperature, which is in the range of 0.0345 to 0.0246, 0.0301 to 0.0238, and 0.0318 to 0.0243 g water/g solid for the MG paper, the Kraft paper, and the SBS paperboard, respectively. The net isosteric heats of sorption ( qst) for the paper samples decreased exponentially with increase in moisture content after reaching the maximum values of 18.51, 27.39, and 26.80 kJ/mol for the VP paper, the Kraft paper, and the SBS paperboard, respectively, at low-moisture content. The differential enthalpy and entropy of 3 paper samples showed compensation phenomenon with the isokinetic temperature of 399.7 K indicating that water vapor had been adsorbed onto the paper samples with the same mechanism. Depending on the paper material, tensile strength of paper samples was affected by moisture content. [ABSTRACT FROM AUTHOR]