Search

Materials used for biosensor development normally include silicon, glass, and synthetic polymers, however, paper is a practical and cheap option for the reduction of manufacturing costs with a wide range of applications. Paper-based biosensors have been widely produced, yet poorly characterized on the interaction of different type of molecules with its intricate microstructure. In this work, five ink solutions were prepared as model samples to examine their diffusion and imbibition behavior on grade 3MM chromatography paper. Different mathematical models, previously reported for porous matrices, were fitted and results revealed that upward wicking (r2 ≥ 0.90) equations described the experimental data during the initial stage (< 5 s) and yielded similar permeability values to those calculated from the matrix structural properties. The diffusion coefficient was determined up to attaining equilibrium using the diffusion equation in a cylinder element (r2 ≥ 0.90). This study enabled the characterization of the performance from 3MM chromatography paper, by using ink as a surrogate model of small molecules (e.g. mycotoxins) or small colloidal particles.

Paper drying is the most energy-intensive step in papermaking and around 90% of the total amount of manufactured paper is produced in multi-cylinder dryers. A framework based on a physical model of multi-cylinder drying was developed to assess the effect of various energy-saving measures at a production site. The framework was applied to the drying section of a paper machine producing corrugated paper. The calculated steam and power savings reach up to 1.55 GJth/tpaper and 0.1 GJel/tpaper respectively, depending on the chosen combination of efficiency measures. The cumulative effect of the measures is not equal to the sum of their individual effects, which highlights the importance of accounting for interactions when considering the implementation of several measures. [ABSTRACT FROM AUTHOR]

It is well established that copper sulfide is formed due to reaction of sulfur with copper conductors in transformers and reactors. However, there is very little experimental evidence to demonstrate copper sulfide diffusion into bulk of paper. Diffusion experiments have been carried out on three samples of kraft paper having different thickness. Positron Annihilation Lifetime Spectroscopy has been used to investigate the possibilities of copper sulfide diffusion into bulk of paper. This study has demonstrated that copper sulfide can diffuse into the bulk of paper leading to either increase or decrease in free volume of paper. The reasons for changes in free volume of paper due to copper sulfide deposits are explained. The consequences of copper sulfide diffusion on PD, voltage-current characteristics under ac and volume resistivity are discussed. Electric field simulation has been used to explain the effects of Cu ions and copper sulfide formation on electric stress distribution across paper. [ABSTRACT FROM AUTHOR]

The effects of furfural generation and partitioning on the aging assessment of oil-paper insulation of power equipment were investigated. Oil-paper samples with various furfural contents were prepared using an accelerated thermal aging experiment. The mass of the furfural generated during the aging of insulation paper was calculated and used to establish the quantitative equation between the accumulated furfural and the degree of polymerization (DP) of the insulation paper. Results showed that the reciprocal of the DP value was linearly related to the amount of furfural generated by the insulation paper. Effects of temperature, moisture, and temperature on the furfural partitioning ratio between oil and paper were analyzed using a furfural partitioning experiment, and a furfural partitioning model was established. Results showed that the furfural partitioning ratio in oil was positively correlated with temperature and moisture but negatively correlated with the DP of the insulation paper. A method for assessing the age of an insulation paper by integrating the furfural generation and partitioning models was proposed and applied on a 500-kV reactor that was returned for factory maintenance. The application result indicated that the method could accurately assess the overall aging condition of the oil-paper insulation of the power equipment. [ABSTRACT FROM AUTHOR]

Several miniaturized viscometers, or microviscometers, have been developed exploiting numerous rapid prototyping techniques. Among them, paper microstrips, famously known as microfluidic paper-based analytical devices ($\mu $ PADs), have become popular due to their cost-efficacy, simple fabrication, fast response, and easily disposable. Many fabrication methods are existing to develop paper microstrips. Herein, an alternative fabrication method is proposed where fused deposition modeling (FDM)-based 3-D printer (3DP) has been employed using polycaprolactone (PCL) filament. F, image processing has been utilized to measure viscosity in such microfluidic domain. Viscosity was calculated by measuring the time taken by the fluid to cover a fixed length between two spots in the microchannel based on the programed and color-coded regions-of-interest. The image processing program was developed considering the change in the gray scale in the virtual region of interests (ROIs) in the microchannel during the fluid flow in the paper microstrips. A 3-D printed handheld platform, containing raspberry pi with on-board camera and display, was developed to execute the image processing and automate the entire work flow. In the proposed device, the accuracy was measured to be >92%. [ABSTRACT FROM AUTHOR]

Abstract: The migration of components from paper into Tenax® was studied to determine the influence of molecular size and chemical character of the migrant and the influence of paper characteristics in the migration process. The Weibull model was applied because Fick’s 2nd law of diffusion gave poor fits in some cases. The migration pattern depended on the migrants molecular size and was independent of temperature in the studied range. The migration rate decreased with the migrant molecular size. The influence of the migrants character (polarity and vapour pressure) on the migration behaviour was also studied: nonpolar migrants with high vapour pressure presented low relative migration values and polar migrants presented high values of relative migration. Results indicated that the apparent partition coefficient between paper and the simulant Tenax® increased with the migrant vapour pressure and with both the paper grammage and the recycled pulp content. [ABSTRACT FROM AUTHOR]

A substantial quantity of testing has been performed on the degradation of paper insulation over the decades. The aim being to better educate the electrical industry on how to best operate expensive assets, such as transformers. The longevity of paper insulation is frequently tested using accelerated ageing experiments, where the effects of temperature and the chemical environment on paper lifespan can be studied. Such research has resulted in paper life expectancy curves being published by the IEEE and the IEC. The investigations tend to use sealed vessels. However, the disadvantage of using this method is that the water content of the paper changes during the ageing process which then changes the ageing rate. In these ageing experiments the water and oxygen content was controlled using a special test rig to compare the ageing rate to previous work and to determine the ageing effect of paper by combining temperature, water content of paper and oxygen content of the oil. We found that the rate of paper ageing can be more accurately determined by controlling the water and oxygen during the experiment which then produced noticeable changes in predicting life expectancy. [ABSTRACT FROM PUBLISHER]

Oil-paper insulation ageing of transformer has characteristics of spatial locality due to uneven temperature distribution. The transformer is sealed, it is difficult to obtain the local ageing state of oil-paper insulation by sampling directly. Currently, there are no effective detection method to detect the insulation state of local regions. The oil-immersed paper resistivity inversion method can nondestructively assess the local state of oil-paper insulation. However, the current inversion methods still have shortcomings and need to be improved. In this paper, combining the back propagation neural network (BPNN) and Newton downhill method (NDM), an improved inversion method is proposed to optimize the current inversion method, so as to reduce the effect of initial value on it and make calculated results converge better. Finally, a 3D 10 kV transformer model is established to verify the effectiveness of the proposed method. The resistivity calculated by the improved method show that the method can provide initial resistivity values for technicians and improve the convergence and accuracy of current inversion method, which is more suitable for extending to the engineering practice. [ABSTRACT FROM AUTHOR]

Interest in using vegetable oils as dielectric coolants in power transformers dates back to the early studies on linseed- and castor- based fluids as possible replacements of mineral oil. However, interest in vegetable oils was lost due to their high viscosity and their tendency to oxidize. But, in the early 1990s and due to environmental concerns, the interest in dielectric fluids based on vegetable esters re-emerged. As a result, two vegetable ester? based oils were developed, namely, BIOTEMP, developed by ABB, and FR3?, developed by Cooper Power Systems. [ABSTRACT FROM PUBLISHER]

It is state-of-the-art to describe the dielectric behavior of an insulation material by its permittivity and its specific electric conductivity in order to estimate the dielectric stress of an insulation system. Thus, the electric field at DC voltage stress is determined according to the stationary electrical conduction field with the electric conductivity of the insulation materials. However, at oil-insulated arrangements a higher field strength in front of bare metal electrodes at high DC voltage stress occurs, which is not explainable with this model. Therefore, a charge carrier-based approach is presented to describe the dielectric behavior of the oil-paper insulation. It describes the movement of charge carriers and their effect on the electric field strength. Their drift leads to an accumulation of charge carriers in front of electrodes which results in a higher field strength in these areas, which can be calculated numerically using the Poisson-Nernst-Planck equation system. Compared to the conductivity-based model fundamental differences can be shown. Breakdown experiments qualitatively confirm the expectations according to the charge carrier-based approach. The results show that the charge carrier-based field distribution has to be considered for modelling the electrical field strength distribution at high DC voltage stress. They also show, that the dielectric behavior of these arrangements cannot be explained according to the state-of-the-art model. [ABSTRACT FROM AUTHOR]

Microfluidic paper-based analytical devices ($\mu $ PADs) are a clean-room free, cost-effective, and self-pumping flow-based rapid prototyping technique, which is compatible with a varying range of fluids. Until now, $\mu $ PADs have been primarily fabricated using crayons, and plotting-machine and solid-ink printers. These devices can be easily employed for various detection schemes, such as electrical, electrochemical, and optical. The presence of a capillary effect in the chromatograph paper has made $\mu $ PADs independent of a passive device, such as pumps and valves. In this paper, an alternative and a novel method is proposed to achieve the $\mu $ PADs effortlessly using a 3-D printer (3DP), which has many advantages over the existing methods. For creating hydrophobic barriers for microchannel walls, polycaprolactone (PCL) filament was used with fused-deposition modeling (FDM) 3DP. PCL filaments were deposited on the chromatography paper followed by heating for determining the overall dimension and depth of the microchannel at which PCL melts and penetrates into this paper. The $\mu $ PADs are characterized and optimized for two parameters. First, fabrication parameters, such as heating temperature and time duration, were used for the creation of the hydrophobic barrier using a hot air oven. Second, the microchannel parameters, such as microchannel width, boundary thickness, chromatography paper grade, and microchannel source shape (rectangular, triangular, and circular) were used for the fluid-flow by measuring the time taken by fluid to travel a fixed length of the microchannel. After rigorous analysis, it was found that for the creation of the hydrophobic barrier, $\mu $ PADs heated between temperature 120°C to 150°C require 30 min. Under optimized conditions for the fluid flow, the chromatography paper grade 1441 with a triangular source microchannel was found to be best. This paper provides an alternate, simple, and optimized method toward the development of the application-specific $\mu $ PADs, such as the micro-viscometer, which, in turn, can be widely used to monitor various types of fluids including human bodily fluids. [ABSTRACT FROM AUTHOR]

Cooperation is a fundamental behaviour observed in all forms of life. The evolution of cooperation has been widely studied, but almost all theories focused on the cooperating individual and its genes. We suggest a different approach, taking into account the microbes carried by the interacting individuals. Accumulating evidence reveals that microbes can affect their host’s well-being and behaviour, yet hosts can evolve mechanisms to resist the manipulations of their microbes. We thus propose that coevolution of microbes with their hosts may favour microbes that induce their host to cooperate. Using computational modelling, we show that microbe-induced cooperation can evolve and be maintained in a wide range of conditions, including when facing hosts’ resistance to the microbial effect. We find that host–microbe coevolution leads the population to a rock–paper–scissors dynamics that enables maintenance of cooperation in a polymorphic state. Our results suggest a mechanism for the evolution and maintenance of cooperation that may be relevant to a wide variety of organisms, including cases that are difficult to explain by current theories. This study provides a new perspective on the coevolution of hosts and their microbiome, emphasizing the potential role of microbes in shaping their host’s behaviour. [ABSTRACT FROM AUTHOR]

The methodologies used by various researchers to determine the moisture diffusion coefficients in Kraft paper and pressboard transformer insulation are reviewed. Moisture concentration profiles during insulation drying, calculated using the various coefficients, are presented. [ABSTRACT FROM AUTHOR]

This work investigates the effect of alternating current partial discharge (AC PD) byproducts on the dielectric frequency response (DFR) of oil-paper insulation comprising of a small cavity, in the frequency range of 1.0 mHz to 1.0 kHz. The investigations were done by utilizing experimental results in combination with a Finite Element Method (FEM) model. The results presented in this paper show that ageing by-products in the cavity (PD stressed volume) alone will not result into the change in DFR of oil-paper insulation. According to simulation results, the significant change in the DFR results is mainly caused by PD by-products (positive and negative charges, and electrons) which tend to conduct or diffuse into the bulk of oil-paper insulation. The change in a dissipation factor curve due to PD by-products was observed to occur mainly in the middle and low frequency regions. The results indicate that the dissipation factor curves in the middle and low frequency regions depend on the level of PD by-products in oil and paper, respectively. [ABSTRACT FROM AUTHOR]

This paper proposes a method for estimation of tanδ of cellulosic parts in oil-paper insulation from frequency domain spectroscopy based on equivalent circuit model of oil-paper insulation in real-life transformers. Existing literature shows that overall condition of oil-paper insulation in transformer can be assessed by conventional frequency domain spectroscopy. Also, the condition of oil can be separately and easily predicted through analyzing its dielectric properties by taking out the oil samples from transformer. However, it is quite difficult to assess the dielectric properties of cellulosic parts in oil-paper insulation as it cannot be directly accessed from outside for an operating transformer. Considering the aforesaid fact, this paper presents a segregated equivalent circuit model of composite oil-paper insulation that can separately estimate the tanδ profiles for oil as well as cellulosic parts. The tanδ profiles of cellulosic parts obtained from the equivalent circuit model have been validated experimentally. Results show that the tan? profile obtained from experimental result holds good agreement with that of the proposed model. [ABSTRACT FROM PUBLISHER]

A paper-based channel is a useful platform for the facile development of analytical devices implementing various chemical or biological reactions. To improve the analytical performance for various applications, it was necessary to analyze the detailed mixing characteristics within a paper-based channel. In this paper, we proposed a mathematical model to predict a concentration field created as a result of the imbibition of multiple fluids within a porous material. Interestingly, we found that the model exhibited a constant interdiffusion width within a paper-based channel even though the flow front velocity decreased over time. We were able to verify that our model accurately predicted the concentration field by comparing the experimental and numerical results for mixing in a 2 inlet-channel. Finally, we designed and fabricated paper-based channels to generate two (linear and non-linear) concentration gradients based on predictions made by the model. Both the experimental and numerical results were in good agreement, demonstrating that our model was accurate and useful for developing a paper-based analytical device utilizing the mixing characteristics of a sample and reagent flow system. [ABSTRACT FROM AUTHOR]

Paper materials are used as the insulation of power transformers. Over time these materials slowly degrade, until they reach a point when they no longer function effectively as transformer insulation, and the transformer has then reached its end of life. The aging rate of paper is affected by temperature, water, oxygen and acids. Investigations have been performed previously on Kraft and Kraft thermally upgraded types of paper. However, a different type of paper used in transformer insulation, Grade 3 presspaper (which contains cotton), has not been extensively tested and compared to Kraft paper. In these experiments we studied the aging rate of Grade 3 presspaper and compared it to our previous studies of Kraft paper. Traditionally, the aging rate of paper has been studied in sealed vessels. The problem with this approach is that the chemical environment within the vessel will change during aging, and so the aging rate will be affected. In our experiment setup we controlled the water and oxygen content to more accurately determine the aging rate. Similarly to Kraft paper, the aging rate of Grade 3 presspaper with the same water content increased with oxygen content in the oil. Life curves were developed based on the water content of the paper and the oxygen content of the oil. [ABSTRACT FROM AUTHOR]

Dielectric response testing is a non-destructive insulation testing method that is widely used for assessing insulation properties. Time-and frequency-domain dielectric spectra are closely dependent on insulation conditions. In comparison with the time-domain spectrum, the frequency-domain dielectric response under sweep sinusoidal excitation has a stronger anti-interference capability and a more comprehensive insulation information. However, the wide application of the measurement using the frequency-domain dielectric response under sweep sinusoidal excitation is hindered by its long testing time. A possible solution is obtaining the frequency-domain spectrum by transforming the tested time-domain spectrum, such that the time- and frequency-domain spectra can be obtained in one measurement. Polarization depolarizing current measurement under DC excitation is a common time-domain testing method for time-frequency-domain conversion. However, such conversion is valid only at extremely low frequencies (less than 0.05 Hz), indicating a slight overlap with the frequency range of the measurement using the frequency-domain dielectric response under sweep sinusoidal excitation. Moreover, the effective conversion frequency range cannot be controlled manually, and the measurement using time-domain dielectric response under DC excitation is hindered by the anti-interference capability due to micro polarization-depolarization current. In addition, scholars have found nonlinearity in a partial insulation system. As the bridge of the traditional time-frequency-domain conversion, a linear extended Debye model cannot accurately reflect insulation materials that exhibit nonlinear characteristics, thereby further limiting the application scope of time-frequency-domain conversion. This study introduces the system identification theory to demonstrate the problems existing in the traditional time-frequency-domain conversion and proposes an improved time-domain testing method based on the previous work. The improved method extends the effective frequency range of time-frequency-domain conversion and emphasizes the comprehensive analysis of the insulation by combining the measured time-domain spectrum and the frequency-domain spectrum conversed from time-domain data. [ABSTRACT FROM AUTHOR]

The Last decade saw significant growth in the digital terrestrial television (DTT) subscribers. The High peak-to-average power ratio (PAPR) of the transmitted signal is implied by the large fluctuations in its amplitude, which is a serious issue in the contemporary and next generation DTT broadcasting systems. These large fluctuations prevent feeding the high power amplifier (HPA) at an operating point near its non-linear (NL) saturation region, thereby lowering its power efficiency. For a better future, energy-efficient green communications is the need of hour. This paper focuses on digital predistortion (DPD), which is among the widely used techniques for HPA linearization in order to minimize the NL effects. DPD technique requires a feedback signal. This paper proposes a novel adding signal-based digital predistortion, where the output of the HPA is gradually linearized by adding a signal at the input in an iterative manner. By Taylor series approximation, the DPD problem can be posed as a convex one. We prove that a tighter upper bound exists for the convergence factor and instead of directly solving the convex problem, we pick a convergence factor value within its bounds that offers a good trade-off between convergence speed and residual error value. The simulation results show that the proposed technique can quickly linearize the HPA with good convergence. [ABSTRACT FROM AUTHOR]

This paper proposed a simulation method for the charge transport in single-layer oil-paper insulation. The method of transient upstream finite-element method (FEM) is derived in order to calculate the time variation of charge densities in medium. The numerical simulation of charge transport in the single-layer oil-paper insulation is realized by applying the transient upstream FEM to the transport equations of bipolar charges. With reasonable microparameter, the charge transport in an experimental object is simulated. The simulation results are consistent with the experimental data. A bent model of oil-paper insulation is analyzed to study the charge distribution under the actual condition. This paper provides an exploratory research to the simulation of charge phenomenon in oil-paper, and has guiding significance to the design of oil-paper insulation. [ABSTRACT FROM AUTHOR]

The temperature distribution is vital to the lifetime and reliability of converter transformer bushings. However, the temperature distribution of epoxy impregnated paper converter bushings under a certain current has usually been calculated through the two dimensional model, without considering the heat convection and radiation effects. In this paper, using the computational fluid dynamics (CFD) and finite element method (FEM) analysis, a 3-D electromagnetic-fluid-thermal analysis method has been proposed. With the considering of heat conduction, heat convection and radiation, the temperature distribution of the converter transformer bushing has been simulated according to the actual operating environment. The temperature and velocity distribution of the converter transformer bushing has been obtained. Moreover, the simulation results have been compared with the experimental results to verify the accuracy of the simulation method. The simulation results, especially for the inner conductor, external conductor and the epoxy impregnated paper, are very close to the experimental results and the maximum temperature difference percentage is within 10 %, which indicates the accuracy and effectiveness of the electromagnetic-fluid-thermal analysis method proposed. [ABSTRACT FROM AUTHOR]

Alzheimer's disease is a complex, multi-factorial, and multi-parametric neurodegenerative etiology. Mathematical models can help understand such a complex problem by providing a way to explore and conceptualize principles, merging biological knowledge with experimental data into a model amenable to simulation and external validation, all without the need for extensive clinical trials. We performed a scoping review of mathematical models describing the onset and evolution of Alzheimer's disease as a result of biophysical factors following the PRISMA standard. Our search strategy applied to the PubMed database yielded 846 entries. After using our exclusion criteria, only 17 studies remained from which we extracted data, which focused on three aspects of mathematical modeling: how authors addressed continuous time (since even when the measurements are punctual, the biological processes underlying Alzheimer's disease evolve continuously), howmodels were solved, and how the high dimensionality and non-linearity of models were managed. Most articles modeled Alzheimer's disease at the cellular level, operating on a short time scale (e.g., minutes or hours), i.e., the micro view (12/17); the rest considered regional or brain-level processes with longer timescales (e.g., years or decades) (the macro view). Most papers were concerned primarily with amyloid beta (n = 8), few described both amyloid beta and tau proteins (n = 3), while some considered more than these two factors (n = 6). Models used partial differential equations (n = 3), ordinary differential equations (n = 7), and both partial differential equations and ordinary differential equations (n = 3). Some did not specify their mathematical formalism (n = 4). Sensitivity analyses were performed in only a small number of papers (4/17). Overall, we found that only two studies could be considered valid in terms of parameters and conclusions, and two more were partially valid. This puts the majority (n = 13) as being either invalid or with insufficient information to ascertain their status. This was themain finding of our paper, in that serious shortcomings make their results invalid or non-reproducible. These shortcomings come from insufficient methodological description, poor calibration, or the impossibility of experimentally validating or calibrating the model. Those shortcomings should be addressed by future authors to unlock the usefulness of mathematicalmodels in Alzheimer's disease. [ABSTRACT FROM AUTHOR]

The paper presents new diagnostic method applied to assess aging degree for paper-oil insulation used in professional electrical power device, primarily including medium and high power transformers. The described method is based on modified diagnostics using the recovery voltage effect occurring in dielectrics (RVM ? Recovery Voltage Methods). Modification of the RVM method applied so far, which is now used only to assess moistening degree for paper-oil insulation in power transformers, consists in a new parametric analysis of recovery voltage time characteristics. Simulation and experimental tests carried out in laboratory conditions for adequately prepared insulation samples have proven that the time-constant of recovery voltage decay (?R_MIN) is the most susceptible parameter as regards quantitative change in the function of aging of the examined insulation. This conclusion is also confirmed by statistical studies, in which a multi-parameter variance analysis method has been applied. An original equivalent circuit diagram of the insulation has been used to simulate aging degree of paper-oil insulation samples in numerical tests. The diagram is based on the Cole-Cole type dielectric response model. [ABSTRACT FROM AUTHOR]

Dielectric response measurements in either time or frequency domain are being assessed in modern times for condition monitoring of transformer oil-paper insulation. Proper interpretation of the dielectric test results requires understanding of the physical processes taking place in the insulation structure during such tests. It is thus necessary to establish proper mathematical and analytical formulations of the insulation behavior. Dielectric response functions of various forms based on the classical ?single relaxation time? Debye model have been proposed by various researchers to model the experimental data. In complex dielectrics, it seems however, that the overall response be represented by a distribution of relaxation times (or frequencies), rather than a single ?average? response characteristic. The present contribution provides in brief, the mathematical background for estimating the dielectric response functions used so far for modeling dielectric response measurement data. Function representing distribution of relaxation frequencies has also been estimated. Experimental results on laboratory test samples and field transformers have been presented to study and understand the effects of insulation status and operating conditions on test data. [ABSTRACT FROM AUTHOR]

The service life of a transformer is determined by the condition of its oil?paper insulation. A modified Cole?Cole model was introduced to describe the frequency domain spectroscopy (FDS) curves based on the classic Debye relaxation model and thereby accurately determined the ageing state of the insulation of a power transformer using FDS. Oil?paper insulation samples with different ageing states are prepared under laboratory conditions, and a characteristic parameter is extracted to quantify their ageing states after a detailed investigation of the frequency domain dielectric properties of the samples. Results reveal that the modified Cole?Cole model, including the ? relaxation components, dc and hopping conductivity components, can be employed to effectively model the frequency dielectric characteristics of oil?paper insulation. Furthermore, the extracted characteristic parameter from this model, ??, can be utilized in the quantitative evaluation of the ageing states of transformer insulation. A case example is discussed to demonstrate the applicability of the proposed technique in the condition assessment of field power transformers. [ABSTRACT FROM AUTHOR]

In this paper the accelerated aging experiments of oil-paper insulation are carried out to simulate the oil-paper aging process under normal thermal aging process. On the basis of the results of accelerated aging experiments, how the deviation degree of aging status change under the same aging factors is studied, and a method to calculate the failure probability due to the loss of mechanical strength of the insulation is put forward. This paper presents an approach for economic assessment on insulation diagnosis through accelerated aging experiments. The foundation of this approach for economic assessment on insulation diagnosis is to establish condition simulation method of triple relationships between condition status, aging time and failure probability according to data from accelerated aging experiments. The conclusions are made that the economic and technical factors can affect the optimum life cycle cost of each maintenance strategy, which consequently affects the economic feasibility of condition-based maintenance strategies. [ABSTRACT FROM AUTHOR]

The presence of moisture in oil impregnated paper insulation (OIP) is detrimental to its long time performance. Until recently, it was thought insulation ageing was only a function of temperature and electrical stress. It has now been realized that moisture in all its forms causes rapid degradation of the electrical and mechanical properties with time. In this study, insulation paper samples were conditioned for desired level of moisture and were impregnated with premium quality transformer oil. The oil impregnated samples with 1 to 3 % moisture content were aged at 90 to 130°C. The indices for determining the extent of ageing considered in this work are degree of polymerization (DP), furan, carbon monoxide and carbon dioxide content. These quantities were monitored throughout the ageing experimental run. End-of-life (EOL) criterion used here is the reduction in the value of DP. Phenomenological models for estimating the service life of insulation are proposed and are validated against actual experimental data. [ABSTRACT FROM AUTHOR]

For the stability of composite fibre spinning, the difference in and distribution of the polymer melt velocity during the spinning are among the factors of importance. Based on the basic equation for the control of composite spinning dynamics, boundary conditions are identified and reported in this paper. A mathematical model for the symmetric and asymmetric distribution of the melt flow velocity in the microhole of the spinneret of the composite spinning assembly was developed. The accuracy of the mathematical model was also ascertained. It gives a theoretical basis for the designing of a composite spinning assembly. [ABSTRACT FROM AUTHOR]

Navigational safety necessitates careful route monitoring, which includes staying on the planned course. For a ship to achieve effective route monitoring while changing course, a wheel over point (WOP) must be precisely calculated and marked on a charted course. The reason is to warn the watchkeeping officer that the ship must make a course alteration to prevent overshooting the intended route. One of the techniques for appraising the WOP is the advance transfer technique (ATT). During a practical review by means of an electronic and paper chart work exercise of the ATT, this study discovered two research gaps related to the technique. Following that, this study created an improved advance transfer mathematical model (ATMM) by restructuring the use of the ship's turning circle to overcome the limitations discovered. To validate the improvement of the ATMM over the ATT, data were collected by evaluating both methods using a ship simulator and performing a manoeuvring analysis. The data, specifically the reduction in the cross-track distance (XTD), was validated in three verification stages: compliance with XTL, percentage change, and Mann‒Whitney U test using IBM SPSS. In comparison to the ATT, the ATMM produces better results in terms of the course-keeping capability and it can be implemented as an algorithm in an integrated bridge navigation system for autonomous ship navigation safety. [ABSTRACT FROM AUTHOR]

Dielectric parameters of insulation used in High voltage equipments like power transformers are dependent on insulation size and geometry. As a result parameters evaluated from the model of one insulation system finds limited use in predicting the condition of other. Poles calculated from branch parameters of insulation model, on the other hand are independent of insulation geometry. However such technique requires accurate modeling of dielectric response function. Conventional Debye model does not consider the effect of temperature gradient that exists across the length of the insulation during its operation. In the present paper it is shown that for more accurate modeling and better understanding of dielectric response of oil-paper insulation, a new model which considers the effect of temperature gradient on insulation properties, is necessary. The present paper reports a methodology that is capable of identifying such a model using PDC measurement data. It is also shown that use of conventional Debye model overestimates the pole values and the error increases with usage of the insulation. [ABSTRACT FROM AUTHOR]