Search

The article focuses on process intensification in the pulp and paper industry, where opportunities exist to improve efficiency and yield while reducing energy and water use and corresponding CO2 emissions. Topics include the kraft chemical pulping process, challenges of the process, and the production of final paper products.

Once retracted, the citation count of a research paper might be intuitively expected to drop precipitously. Here, we assessed the post-retraction citation of life and medical sciences papers from two top-ranked, multidisciplinary journals Nature and Science, from 2010 to 2018. Post-retraction citations accounted for a staggering 47.7% and 40.9% of total citations (median values), respectively, of the papers included in our analysis. These numbers are comparable with those from two journals with lower impact factors, and with retracted papers from the physical sciences discipline. A more qualitative assessment of five papers from the two journals with a high percentage (>50%) of post-retraction citations, all of which are associated with misconduct, reveal different contributing reasons and factors. Retracted papers associated with highly publicized misconduct cases are more prone to being cited with the retraction status indicated, or projected negatively (such as in the context of research ethics and misconduct discussions), with the latter also indicated by cross-disciplinary citations by humanities and social sciences articles. Retracted papers that retained significant validity in their main findings/conclusions may receive a large number of neutral citations that are somewhat blind to the retraction. Retracted papers in popular subject areas with massive publication outputs, particularly secondary publications such as reviews, may also have a high background citation noise. Our findings add further insights to the nature of post-retraction citations beyond the plain notion that these are largely made through sheer ignorance or negligence by the citing authors. [ABSTRACT FROM AUTHOR]

In each of 41 research journals in the physical, life, and social sciences there is a linear relationship between average number of references and paper lengths. Because papers of average lengths in various sciences have the same number of references, this article concludes that citation counts to them can be inter-compared within that accuracy, except in the case of review journals. (AEF)

We describe herein a method of recharging used commercial spin columns or assembling homemade spin columns using filter paper as binding material for cost-effective, low throughput nucleic acid purification. The efficiency of filter paper-based spin columns was evaluated for purification of nucleic acids from various sources. Following protocols of commercial kits, we found filter paper to be a useful binding material for purification of nucleic acids, including plant genomic DNA, plant total RNA, PCR products, and DNA from agarose gels. However, filter paper has a weak binding affinity to plasmid DNA in tested miniprep protocols. Protocols for the use of filter paper recharged spin columns or homemade spin columns for low throughput purification of plant genomic DNA and total RNA with unused commercial kit buffers or less expensive homemade buffers are presented. [ABSTRACT FROM AUTHOR]

This paper describes a study in which five physical science teachers were requested to take photographs and describe the science concepts embedded in these. Particularly, the science had to be relevant to the grade 10-grade 12 curriculum they were teaching. This study was an exploratory case study employing qualitative methods. To analyze data from the study, the four-field method for analyzing photographs was used (Käpylä, 2014). The analysis reveals that in all the narratives accompanying the captured photographs, the Indirect Observation-Cognitive Domain dominated. The overall findings of the study demonstrate that the corresponding narrations reflect the cognitive role of photographs. However, this paper argues that phenomenological thinking about human experience connects emotions and personal and social meanings to factual knowledge and knowledge structures, therefore these purposes of pictures in teaching and learning of physical science could be divided into cognitive, affective and psychomotor domains.

This article focuses on the nature of acidity in pulp paper as found in comic books and library collections. Some of the various factors that contribute to the deterioration of paper are considered from a chemical perspective. (CW)

The objective of this work was to investigate the influence of hydrogen bonds between fibres on static and dynamic strength properties of paper. A commercial bleached pinewood kraft pulp was soaked in water, refined in a PFI, and used to form paper webs in different solvents, such as water, methanol, ethanol, n-propanol and n-butanol, to determine the effect of their dipole moment on static and dynamic strength properties of resulting paper sheets. Paper which was formed in water, being the solvent of the highest dipole moment among the tested ones, showed the highest breaking length and tear resistance. When paper webs were formed in n-butanol, which was the least polar among the solvents, these parameters were reduced by around 75%. These results provide evidence of the importance of water in paper web formation and strong impact of hydrogen bonds between fibres on strength properties of paper. [ABSTRACT FROM AUTHOR]

The cost of specialized scientific equipment can be high and with limited funding resources, researchers and students are often unable to access or purchase the ideal equipment for their projects. In the fields of materials science and mechanical engineering, fundamental equipment such as tensile testing devices can cost tens to hundreds of thousands of dollars. While a research lab often has access to a large-scale testing machine suitable for conventional samples, loading devices for meso- and micro-scale samples for in-situ testing with the myriad of microscopy tools are often hard to source and cost prohibitive. Open-source software has allowed for great strides in the reduction of costs associated with software development and open-source hardware and additive manufacturing have the potential to similarly reduce the costs of scientific equipment and increase the accessibility of scientific research. To investigate the feasibility of open-source hardware, a micro-tensile tester was designed with a freely accessible computer-aided design package and manufactured with a desktop 3D-printer and off-the-shelf components. To our knowledge this is one of the first demonstrations of a tensile tester with additively manufactured components for scientific research. The capabilities of the tensile tester were demonstrated by investigating the mechanical properties of Graphene Oxide (GO) paper and thin films. A 3D printed tensile tester was successfully used in conjunction with an atomic force microscope to provide one of the first quantitative measurements of GO thin film buckling under compression. The tensile tester was also used in conjunction with an atomic force microscope to observe the change in surface topology of a GO paper in response to increasing tensile strain. No significant change in surface topology was observed in contrast to prior hypotheses from the literature. Based on this result obtained with the new open source tensile stage we propose an alternative hypothesis we term ‘superlamellae consolidation’ to explain the initial deformation of GO paper. The additively manufactured tensile tester tested represents cost savings of >99% compared to commercial solutions in its class and offers simple customization. However, continued development is needed for the tensile tester presented here to approach the technical specifications achievable with commercial solutions. [ABSTRACT FROM AUTHOR]

The bibliographic methodology of citation tabulation was applied to the problem of identifying highly cited Soviet scientific papers (in Science Citation Index). Findings indicate that lists generated are indicative of areas of strong Soviet research and that institutions producing these papers include the most important Soviet labs. (Author/JN)

The present work was focused to design a cheap, rapid, portable and easy to use filter paper based assay for the qualitative and quantitate analysis of acetone. Sodium alginate gel was loaded with the acetone specific optical signal probe, and subsequently coated onto filter paper surface to design portable colorimetric assays for acetone monitoring. The color of the paper sensor strip was observed to change from dark yellow to light yellowish in the presence of varying concentrations of acetone. Three different color analyzing models including RGB, HSV, and LAB were employed to probe the output optical signal, and their performance was compared in terms of better interpretation of the generated signal. The LAB model was found to provide better analytical figures of merit with a linear response for the acetone concentration ranging from 2.5 to 1500 ppm, and a limit of detection of 0.5 ppm. Furthermore, the specificity of the designed filter paper based sensor was demonstrated against different common interfering compounds. The results demonstrated the potential of our proposed filter paper based sensor as a novel tool for the analysis of acetone. [ABSTRACT FROM AUTHOR]

Purpose: In 2017 and 2018, engineering applications and design process were given weight to with the updates carried out in the Physical Sciences Lesson Curriculum in Turkey. For the STEM education which is at the center of this update to reach its target, it is highly important that students accurately learn what engineers do, what their work field is, the characteristics they should carry and understand the nature of engineering. The present study aims to identify the perception of engineers of 5th, 6th and 7th grade middle school students through drawings. Research Methods: The study group of this research which is a descriptive survey model consisted of 119 students from a city located in the East Anatolian region of Turkey who were 5th, 6th and 7th grade students. The "Draw an Engineer" form was used as the data collection tool and the drawings were evaluated with a checklist. Findings: As a result of this study, it was determined that a majority of the students adopted the stereotyped idea that engineers are male. The findings showed that as the age increased, the rate of male engineers in the drawings increased as well and engineers creating designs were given more place to. In this study, it was concluded that in general the students mixed up what engineers do with the work construction workers or repairmen do and that they perceived engineers as individuals who work alone. Implications for Research and Practice: To be able to develop students' perception of engineers in a positive manner, it is considered important for students' to experience STEM education applications. In this context, it is suggested to give place to 'Science, Engineering and Entrepreneurship Applications' in all grade levels both in school and outside school learning environments. [Paper presented at the International Congress on Science and Education organized in Afyonkarahisar on 23-25 March, 2018.]

Recently "Curriculum and Assessment Policy Statements" ("CAPS") were introduced in South Africa in response to confusion precipitated by previous curriculum documents. The purpose of this paper is to explore that confusion in the subject 'Physical Sciences' and consider the nature of the transformation from the previous curriculum by looking at curriculum documents and examination papers. We present a two phase curriculum change model which suggests that congruency between curriculum documents and examinations is critical for effective curriculum change. We analyse the pre-"CAPS" curriculum, the "National Curriculum Statement" ("NCS"), on its own terms by using the stated outcomes as our reference point. Our analysis reveals that the weighting and conceptualization of the outcomes shifted through successive documents, which undermined congruency between the documents and meant that content-oriented science masqueraded as inquiry-oriented science. This led to a retreat from the original vision of weighting skills and relevance equally with content. The examinations took this retreat a step further. Evidence of the retreat is that the nature of the questions asked in the 2008 examinations on the "NCS" was similar to that of the 2007 examinations on the previous curriculum which had not changed since apartheid. However, in the "NCS" examinations there was a small shift towards contextualisation and inquiry oriented science. The retreat means the vision of transformation which was the rationale for the "NCS" curriculum was eroded--instead of transformation, there was transmutation back to the old apartheid curriculum. The Physical Sciences "CAPS" cements the retreat and creates new confusion by changing the syllabus again without signposting the change.

This paper outlines the development of a comparative research framework in subject didactics and applies this in the process of analysing the transformations from academic disciplines across different school subjects. The theoretical framework builds on the concepts of 'powerful knowledge' and 'transformation' and 'epistemic quality' within which transformation processes from the classroom to the societal level are considered as 'trajectories of powerful knowledge and epistemic quality'. The framework is used to analyse the findings from recent empirical studies across school subjects that have been reported on in publications arising from the Knowledge and Quality across School Subjects and Teacher Education (KOSS) network. The paper then focuses on analysing the transformations from disciplines across school subjects, given that the first boundary in defining powerful knowledge concerns knowledge that is specialized in both how it is produced and transmitted. To analyse this boundary, the findings from the empirical studies are grouped into broad subject categories. These are then compared with the corresponding disciplines by using the widely cited Biglan classification scheme of academic disciplines in higher education. Finally, we consider the implications for curriculum planning and teacher education policy and reflect on the concept of subject-specific educational content knowledge (SSECK).

The following paper continues the previous part, and examines the influence of crystallography on Fröbel's conception of mathematics. In this part we focus on yet unpublished material. These unpublished notes of Fröbel underline the visual transfer of drawing and images of crystals, mainly developed by Haüy, which were widespread at the turn of the eighteenth to the nineteenth century, into the Fröbelian activities. Hence, the paper shows that a transfer of knowledge occurred from crystallography to mathematical education as well as the interweaving of philosophical and scientific reflections in Fröbel's thought as early as the late 1810s. [For Part 1, see EJ1381074.]

Friedrich Fröbel is known as the founder of the modern kindergarten and for his development of novel learning materials called Gifts and Occupations. One of the foci of Fröbel's programme was mathematical education, which he addressed and taught through various activities that encouraged the largely implicit transmission of mathematical principles. Based on a historical analysis of Fröbel's background in mathematics and crystallography and drawing on Fröbel's notes, the first part of this paper proposes that the mathematics and the various Gifts taught and used in Fröbelian kindergartens have their roots in two traditions, both of which intersected in Fröbel's thought: first, a visual tradition, influenced by drawings of crystals; second, a tradition influenced implicitly by German Idealism consisting of geometric methods and conceptions as well as notions derived from crystallography used to analyse the structure of crystals and mainly developed by Christian Samuel Weiß. The second part of this paper will inspect these influences drawing on Fröbel's previously unpublished notes.

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education. [ABSTRACT FROM AUTHOR]

Students in higher engineering education should develop competencies to be prepared for their future professional careers. However, in the field of food technology it is not clear what set of competencies is most relevant. This paper created a comprehensive list of competencies for food technologists by combining both domain-specific and general literature (n = 4), and policy documents (n = 6). This list was used to establish the relative importance of its elements and map opportunities for optimal curricular improvement at Wageningen University. Data were collected via a survey and interviews with graduates and professionals. A comparison of the perceived importance of competencies versus the perceived opportunities for learning showed that "analytical thinking, critical thinking, problem solving" and "decision making" needed more attention in the study curriculum. The comprehensiveness of the list was assessed by pilot testing with respondents. The list and method show potential for other disciplines to identify and select important competencies.

Early industrialization and the development of cheap production processes for paper have led to an exponential accumulation of paper-based documents during the last two centuries. Archives and libraries harbor vast amounts of ancient and modern documents and have to undertake extensive endeavors to protect them from abiotic and biotic deterioration. While services for mechanical preservation such as ex post de-acidification of historic documents are already commercially available, the possibilities for long-term protection of paper-based documents against fungal attack (apart from temperature and humidity control) are very limited. Novel processes for mechanical enhancement of damaged cellulosic documents use Ionic Liquids (IL) as essential process components. With some of these ILs having azole-functionalities similar to well-known fungicides such as Clotrimazole, the possibility of antifungal activities of these ILs was proposed but has not yet been experimentally confirmed. We evaluated the potency of four ILs with potential application in paper restoration for suppression of fungal growth on five relevant paper-infesting molds. The results revealed a general antifungal activity of all ILs, which increased with the size of the non-polar group. Physiological experiments and ultimate elemental analysis allowed to determine the minimal inhibitory concentration of each IL as well as the residual IL concentration in process-treated paper. These results provide valuable guidelines for IL-applications in paper restoration processes with antifungal activity as an added benefit. With azoles remaining in the paper after the process, simultaneous repair and biotic protection in treated documents could be facilitated. [ABSTRACT FROM AUTHOR]

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery. [ABSTRACT FROM AUTHOR]

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs. [ABSTRACT FROM AUTHOR]

We investigate the degree to which impact in science and technology is associated with surprising breakthroughs, and how those breakthroughs arise. Identifying breakthroughs across science and technology requires models that distinguish surprising from expected advances at scale. Drawing on tens of millions of research papers and patents across the life sciences, physical sciences and patented inventions, and using a hypergraph model that predicts realized combinations of research contents (article keywords) and contexts (cited journals), here we show that surprise in terms of unexpected combinations of contents and contexts predicts outsized impact (within the top 10% of citations). These surprising advances emerge across, rather than within researchers or teams—most commonly when scientists from one field publish problem-solving results to an audience from a distant field. Our approach characterizes the frontier of science and technology as a complex hypergraph drawn from high-dimensional embeddings of research contents and contexts, and offers a measure of path-breaking surprise in science and technology. Here, using hypergraph modeling the authors show that surprising research (in terms of unexpected combinations of research contents and contexts) is associated with impact and arises from scientific outsiders solving problems in distant disciplines. [ABSTRACT FROM AUTHOR]

Microbial fuel cells (MFCs) can evolve in a viable technology if environmentally sound materials are developed and became available at low cost for these devices. This is especially important not only for the designing of large wastewater treatment systems, but also for the fabrication of low-cost, single-use devices. In this work we synthesized membranes by a simple procedure involving easily-biodegradable and economic materials such as poly (vinyl alcohol) (PVA), chitosan (CS) and the composite PVA:CS. Membranes were chemical and physically characterized and compared to Nafion®. Performance was studied using the membrane as separator in a typical H-Type MFCs showing that PVA:CS membrane outperform Nafion® 4 times (power production) while being 75 times more economic. We found that performance in MFC depends over interactions among several membrane characteristics such as oxygen permeability and ion conductivity. Moreover, we design a paper-based micro-scale MFC, which was used as a toxicity assay using 16 μL samples containing formaldehyde as a model toxicant. The PVA:CS membrane presented here can offer low environmental impact and become a very interesting option for point of need single-use analytical devices, especially in low-income countries where burning is used as disposal method, and toxic fluoride fumes (from Nafion®) can be released to the environment. [ABSTRACT FROM AUTHOR]

Introduction: Rolf Landauer declared in 1991 that "information is physical". Since then, information has come to be seen by many physicists as a fundamental component of the physical world; indeed by some as the physical component. This idea is now gaining currency in popular science communication. However, it is often far from clear what exactly this statement means; exactly how is information physical? And why this should matter for information science? The purpose of this paper is to clarify just what is meant by the physical nature of information, and the significance of these considerations for our discipline. Methods: A selective literature review and conceptual analysis, based on literature from both physical science and information science. Results: The prospect of attempting to make links between objective and subjective conceptions of information has been strongly advocated by some authors and doubted by others. The physical nature of information can be understood from three main perspectives: the relation between information and physical entropy; the strongly informational nature of the quantum view of nature; and the possibility of recasting physical laws in informational terms. Conclusions: Based on this analysis, we muse on the relevance of such issues to information science, with particular reference to emergent properties of information. Apart from the added public awareness of the i-word in a very different context from the norm, it may that that there are general laws and principles, or at least useful metaphors and analogies, linking the concept of information in the physical, biological and social domains. [This paper was published as part of: Proceedings of the Eighth International Conference on Conceptions of Library and Information Science, Copenhagen, Denmark, 19-22 August, 2013.]

Quantifying the impact of a scholarly paper is of great significance, yet the effect of geographical distance of cited papers has not been explored. In this paper, we examine 30,596 papers published in Physical Review C, and identify the relationship between citations and geographical distances between author affiliations. Subsequently, a relative citation weight is applied to assess the impact of a scholarly paper. A higher-order weighted quantum PageRank algorithm is also developed to address the behavior of multiple step citation flow. Capturing the citation dynamics with higher-order dependencies reveals the actual impact of papers, including necessary self-citations that are sometimes excluded in prior studies. Quantum PageRank is utilized in this paper to help differentiating nodes whose PageRank values are identical. [ABSTRACT FROM AUTHOR]

The article presents several rules for restructuring papers to avoid losing readers. Authors are instructed to focus their papers on a central contribution and to concentrate on the context-content-conclusion (C-C-C) scheme. They are also advised to optimize a paper's logical flow by avoiding zig-zag and using parallelism and to include complete story in the abstract.

Since 1990, a large and dynamic global science system has evolved, based on grass roots collaboration, and resting on the resources, infrastructure and personnel housed by national science systems. Euro-American science systems have become intensively networked in a global duopoly; and many other countries have built national science systems, including a group of large- and middle-sized countries that follow semi-autonomous trajectories based on state investment, intensive national network building, and international engagement, without integrating tightly into the global duopoly. The dual global/national approach pursued by these systems, including China, South Korea, Iran and India, is not always fully understood in papers on science. Nevertheless, China is now the number two science country in the world, the largest producer of papers and number one in parts of STEM physical sciences. The paper investigates the remarkable evolution of China's science funding, output, discipline balance, internationalisation strategy and national and global networking. China has combined global activity and the local/national building of science in positive sum manner, on the ground of the nationally nested science system. The paper also discusses limits of the achievement, noting that while China-US relations have been instrumental in building science, a partial decoupling is occurring and the future is unclear.

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming. [ABSTRACT FROM AUTHOR]

In papers in areas such as engineering and the physical sciences, figures, tables and formulae are the basic elements to communicate the authors' core ideas, workings and results. As a computational text-matching tool, CrossCheck cannot work on these non-textual elements to detect plagiarism. Consequently, when comparing engineering or physical sciences papers, CrossCheck may return a low similarity index even when plagiarism has in fact taken place. A case of demonstrated plagiarism involving engineering papers with a low similarity index is discussed, and editor's experiences and suggestions are given on how to tackle this problem. The case shows a lack of understanding of plagiarism by some authors or editors, and illustrates the difficulty of getting some editors and publishers to take appropriate action. Consequently, authors, journal editors, and reviewers, as well as research institutions all are duty-bound not only to recognize the differences between ethical and unethical behavior in order to protect a healthy research environment, and also to maintain consistent ethical publishing standards. [ABSTRACT FROM AUTHOR]

Biosensors have emerged as a valuable tool with high specificity and sensitivity for fast and reliable detection of hazardous substances in drinking water. Numerous substances have been addressed using synthetic biology approaches. However, many proposed biosensors are based on living, genetically modified organisms and are therefore limited in shelf life, usability and biosafety. We addressed these issues by the construction of an extensible, cell-free biosensor. Storage is possible through freeze drying on paper. Following the addition of an aqueous sample, a highly efficient cell-free protein synthesis (CFPS) reaction is initiated. Specific allosteric transcription factors modulate the expression of ‘superfolder’ green fluorescent protein (sfGFP) depending on the presence of the substance of interest. The resulting fluorescence intensities are analyzed with a conventional smartphone accompanied by simple and cheap light filters. An ordinary differential equitation (ODE) model of the biosensors was developed, which enabled prediction and optimization of performance. With an optimized cell-free biosensor based on the Shigella flexneri MerR transcriptional activator, detection of 6 μg/L Hg(II) ions in water was achieved. Furthermore, a completely new biosensor for the detection of gamma-hydroxybutyrate (GHB), a substance used as date-rape drug, was established by employing the naturally occurring transcriptional repressor BlcR from Agrobacterium tumefaciens. [ABSTRACT FROM AUTHOR]

This paper deals with the use of metadiscourse by Italian university lecturers who teach through the medium of English (EMI, English-Medium Instruction). The objective is to verify whether, irrespective of possible shortcomings in their mastery of the language, lecturers demonstrate sensitivity to the situational demands of the EMI classroom, paying attention to the needs of the audience. A small, specialised corpus of undergraduate university lectures in the fields of Physical Sciences and Technology will be analysed. In particular, the focus will be on references to the discourse, the code, the lecturer as speaker and the students as listeners. I will investigate what discourse functions metadiscourse markers perform, what form-function associations can be identified, and whether signs of dysfluency and non-standard forms can be found in relation to metadiscourse. The pedagogical implications of the findings will be considered and suggestions provided on how to incorporate metadiscourse in teacher training programmes. The paper will conclude with some methodological reflections on how to investigate metadiscourse in university lectures.

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing. [ABSTRACT FROM AUTHOR]

In this study, we address the question whether (and to what extent, respectively) altmetrics are related to the scientific quality of papers (as measured by peer assessments). Only a few studies have previously investigated the relationship between altmetrics and assessments by peers. In the first step, we analyse the underlying dimensions of measurement for traditional metrics (citation counts) and altmetrics–by using principal component analysis (PCA) and factor analysis (FA). In the second step, we test the relationship between the dimensions and quality of papers (as measured by the post-publication peer-review system of F1000Prime assessments)–using regression analysis. The results of the PCA and FA show that altmetrics operate along different dimensions, whereas Mendeley counts are related to citation counts, and tweets form a separate dimension. The results of the regression analysis indicate that citation-based metrics and readership counts are significantly more related to quality, than tweets. This result on the one hand questions the use of Twitter counts for research evaluation purposes and on the other hand indicates potential use of Mendeley reader counts. [ABSTRACT FROM AUTHOR]

The need to complete multiple tasks concurrently is a common occurrence both daily life and in occupational activities, which can often include simultaneous cognitive and physical demands. As one example, there is increasing availability of head-worn display technologies that can be employed when a user is mobile (e.g., while walking). This new method of information presentation may, however, introduce risks of adverse outcomes such as a decrement to gait performance. The goal of this study was thus to quantify the effects of a head-worn display (i.e., smart glasses) on motor variability during gait and to compare these effects with those of other common information displays (i.e., smartphone and paper-based system). Twenty participants completed four walking conditions, as a single task and in three dual-task conditions (three information displays). In the dual-task conditions, the information display was used to present several cognitive tasks. Three different measures were used to quantify variability in gait parameters for each walking condition (using the cycle-to-cycle standard deviation, sample entropy, and the “goal-equivalent manifold” approach). Our results indicated that participants used less adaptable gait strategies in dual-task walking using the paper-based system and smartphone conditions compared with single-task walking. Gait performance, however, was less affected during dual-task walking with the smart glasses. We conclude that the risk of an adverse gait event (e.g., a fall) in head-down walking conditions (i.e., the paper-based system and smartphone conditions) were higher than in single-task walking, and that head-worn displays might help reduce the risk of such events during dual-task gait conditions. [ABSTRACT FROM AUTHOR]

Background: There is widespread evidence that statistical methods play an important role in original research articles, especially in medical research. The evaluation of statistical methods and reporting in journals suffers from a lack of standardized methods for assessing the use of statistics. The objective of this study was to develop and evaluate an instrument to assess the statistical intensity in research articles in a standardized way. Methods: A checklist-type measure scale was developed by selecting and refining items from previous reports about the statistical contents of medical journal articles and from published guidelines for statistical reporting. A total of 840 original medical research articles that were published between 2007–2015 in 16 journals were evaluated to test the scoring instrument. The total sum of all items was used to assess the intensity between sub-fields and journals. Inter-rater agreement was examined using a random sample of 40 articles. Four raters read and evaluated the selected articles using the developed instrument. Results: The scale consisted of 66 items. The total summary score adequately discriminated between research articles according to their study design characteristics. The new instrument could also discriminate between journals according to their statistical intensity. The inter-observer agreement measured by the ICC was 0.88 between all four raters. Individual item analysis showed very high agreement between the rater pairs, the percentage agreement ranged from 91.7% to 95.2%. Conclusions: A reliable and applicable instrument for evaluating the statistical intensity in research papers was developed. It is a helpful tool for comparing the statistical intensity between sub-fields and journals. The novel instrument may be applied in manuscript peer review to identify papers in need of additional statistical review. [ABSTRACT FROM AUTHOR]

Research paper recommenders emerged over the last decade to ease finding publications relating to researchers’ area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user’s expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list. [ABSTRACT FROM AUTHOR]

We have developed a new litmus paper test (DipTest) for detecting Escherichia coli (E. coli) in water samples by performing enzymatic reactions directly on the porous paper substrate. The paper strip consists of a long narrow piece of cellulose blotting paper coated with chemoattractant (at bottom edge), wax hydrophobic barrier (at the top edge), and custom formulated chemical reagents (at reaction zone immediately below the wax hydrophobic barrier). When the paper strip is dipped in water, E. coli in the water sample is attracted toward the paper strip due to a chemotaxic mechanism followed by the ascent along the paper strip toward the reaction zone due to a capillary wicking mechanism, and finally the capillary motion is arrested at the top edge of the paper strip by the hydrophobic barrier. The E. coli concentrated at the reaction zone of the paper strip will react with custom formulated chemical reagents to produce a pinkish-red color. Such a color change on the paper strip when dipped into water samples indicates the presence of E. coli contamination in potable water. The performance of the DipTest device has been checked with different known concentrations of E. coli contaminated water samples using different dip and wait times. The DipTest device has also been tested with different interfering bacteria and chemical contaminants. It has been observed that the different interfering contaminants do not have any impact on the DipTest, and it can become a potential solution for screening water samples for E. coli contamination at the point of source. [ABSTRACT FROM AUTHOR]

This is the second of two papers on a novel physical science course for student teachers that develops and uses an imaginative approach to Primary Physical Science Education. General philosophical, cognitive, developmental, and scientific issues have been presented in the first paper; here, we briefly recapitulate the most important aspects. In the main part of the current paper, we present in some detail concrete elements of the implementation of the course at three Italian universities where Primary Physical Science Education has been taught for more than 6 years. After a brief description of the course structure, we discuss which parts of macroscopic physics are taught, and how this is done in lectures and labs. Most importantly, we show how the science is entwined with methods related to pedagogy and didactics that (1) help our students approach the science and (2) can be transferred quite readily to teaching children in kindergarten and primary school. These methods include the design of direct physical experience of forces of nature, embodied simulations, writing and telling of stories of forces of nature, and design and performance of Forces-of-Nature Theater plays. The paper continues with a brief description of feedback from former students who have been teaching for some time, and an in-depth analysis of the research and teaching done by one of the students for her master thesis. We conclude the paper by summarizing aspects of both the philosophy and the design of the course that we believe to be of particular value. [For "Primary Physical Science for Student Teachers at Kindergarten and Primary School Levels: Part I--Foundations of an Imaginative Approach to Physical Science," see EJ1260267.]

Background: Identification of the source of mosquito blood meals is an important component for disease control and surveillance. Recently, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiling has emerged as an effective tool for mosquito blood meal identification, using the abdomens of freshly engorged mosquitoes. In the field, mosquito abdomens are crushed on Whatman filter papers to determine the host feeding patterns by identifying the origin of their blood meals. The aim of this study was to test whether crushing engorged mosquito abdomens on Whatman filter papers was compatible with MALDI-TOF MS for mosquito blood meal identification. Both laboratory reared and field collected mosquitoes were tested. Material and methods: Sixty Anopheles gambiae Giles were experimentally engorged on the blood of six distinct vertebrate hosts (human, sheep, rabbit, dog, chicken and rat). The engorged mosquito abdomens were crushed on Whatman filter papers for MALDI-TOF MS analysis. 150 Whatman filter papers, with mosquitoes engorged on cow and goat blood, were preserved. A total of 77 engorged mosquito abdomens collected in the Comoros Islands and crushed on Whatman filter papers were tested with MALDI-TOF MS. Results: The MS profiles generated from mosquito engorged abdomens crushed on Whatman filter papers exhibited high reproducibility according to the original host blood. The blood meal host was correctly identified from mosquito abdomens crushed on Whatman filter papers by MALDI-TOF MS. The MS spectra obtained after storage were stable regardless of the room temperature and whether or not they were frozen. The MS profiles were reproducible for up to three months. For the Comoros samples, 70/77 quality MS spectra were obtained and matched with human blood spectra. This was confirmed by molecular tools. Conclusion: The results demonstrated that MALDI-TOF MS could identify mosquito blood meals from Whatman filter papers collected in the field during entomological surveys. The application of MALDI-TOF MS has proved to be rapid and successful, making it a new and efficient tool for mosquito-borne disease surveillance. [ABSTRACT FROM AUTHOR]

Written communication plays a crucial role in the history of modern civilizations as manuscripts do not only exist contemporarily, but are passed on to subsequent generations. Besides a document’s content, information is stored in the materials used for its production. Analyses of the composition allow, for example, identifying the biological origins of materials, dating, and help to understand degradation patterns. A combination of microscopic and DNA approaches was applied in order to analyze various plant derived writing sheets. Given their diversity and abundance in museum collections, plant based writing supports are yet an underexplored target for DNA studies. DNA retrieval of paper is low compared to raw paper plant material, which is likely due to the loss of organic components during paper production. Optimizing DNA extraction for each respective material drastically increased DNA recovery. Finally, we present a non-invasive DNA sampling method that utilizes nylon membranes, commonly used for bacterial DNA sampling and that is applicable to delicate material. Although bacterial infestation was visible on one sample, as indicated by scanning electron microscopy, endogenous DNA was retrieved. The results presented here are promising as they extend the scope of sources for DNA analyses by demonstrating that DNA molecules can be retrieved from a variety of plant derived writing supports. In future, such analyses can help to explore the biological diversity not only of plants and of additives utilized for producing writing supports, but also of the plenty products made from paper. [ABSTRACT FROM AUTHOR]

Cooperation among kin is common in animal societies. Kin groups may form by individuals directly discriminating relatives based on kin recognition cues, or form passively through natal philopatry and limited dispersal. We describe the genetic landscape for a primitively eusocial wasp, Polistes dominula, and ask whether individuals choose cooperative partners that are nearby and/or that are genetic relatives. Firstly, we genotyped an entire sub-population of 1361 wasps and found genetic structuring on an extremely fine scale: the probability of finding genetic relatives decreases exponentially within just a few meters of an individual’s nest. At the same time, however, we found a lack of genetic structuring between natural nest aggregations within the population. Secondly, in a separate dataset where ~2000 wasps were genotyped, we show that wasps forced experimentally to make a new nest choice tended to choose new nests near to their original nests, and that these nests tended to contain some full sisters. However, a significant fraction of wasps chose nests that did not contain sisters, despite sisters being present in nearby nests. Although we cannot rule out a role for direct kin recognition or natal nest-mate recognition, our data suggest that kin groups may form via a philopatric rule-of-thumb, whereby wasps simply select groups and nesting sites that are nearby. The result is that most subordinate helpers obtain indirect fitness benefits by breeding cooperatively. [ABSTRACT FROM AUTHOR]

The safety of highly aggregated tourist crowds is a challenging and important issue. This paper not only provided a comprehensive analysis of the accidents of highly aggregated tourist crowds but also determined the occurrence mechanism and coping paths. Based on the analysis of multiple cases, we found that the variable status of highly aggregated tourist crowds was the result of the interaction of three main elements: multisource pressure, state mutations and management responses. A series of factors interact and result in accidents, and the lack of a management response or a low-quality management response is the root cause of such accidents. A high-quality management response is a basic safety precaution for highly aggregated tourist crowds. Therefore, forming a virtuous circle of multisource pressure, state mutations and management responses is an effective path for coping with accidents. [ABSTRACT FROM AUTHOR]

The section presents a list of articles in periodicals including "Acta Geologica Polonica," "American Mineralist," "Applied Earth Science," "Applied Geochemistry," 'Australian Journal of Earth Sciences" and "Canadian Mineralogist."

In each of 41 research journals in the physical, life, and social sciences there is a linear relationship between the average number of references and the normalized paper lengths. For most of the journals in a given field, the relationship is the same within statistical errors. For papers of average lengths in different sciences the average number of references is the same within ±17%. Because papers of average lengths in various sciences have the same number of references, we conclude that the citation counts to them can be inter-compared within that accuracy. However, review journals are different: after scanning 18 review journals we found that those papers average twice the number of references as research papers of the same lengths. [ABSTRACT FROM AUTHOR]

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors’ collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews. [ABSTRACT FROM AUTHOR]