Search

The rapid discrimination of bacteria is currently an emerging trend in the fields of food safety, medical detection, and environmental observation. Traditional methods often require lengthy culturing processes, specialized analytical equipment, and bacterial recognition receptors. In response to this need, we have developed a paper-based fluorescence sensor array platform for identifying different bacteria. The sensor array is based on three unique carbon quantum dots (CQDs) as sensing units, each modified with a different antibiotic (polymyxin B, ampicillin, and gentamicin). These antibiotic-modified CQDs can aggregate on the bacterial surface, triggering aggregation-induced fluorescence quenching. The sensor array exhibits varying fluorescent responses to different bacterial species. To achieve low-cost and portable detection, CQDs were formulated into fluorescent ink and used with an inkjet printer to manufacture paper-based sensor arrays. A smartphone was used to collect the responses generated by the bacteria and platform. Diverse machine learning algorithms were utilized to discriminate bacterial types. Our findings showcase the platform's remarkable capability to differentiate among five bacterial strains, within a detection range spanning from 1.0 × 10 3  CFU/mL to 1.0 × 10 7  CFU/mL. Its practicality is further validated through the accurate identification of blind bacterial samples. With its cost-effectiveness, ease of fabrication, and high degree of integration, this platform holds significant promise for on-site detection of diverse bacteria., (© 2024. The Author(s).)

The rapid spread of SARS-CoV-2 caused the COVID-19 pandemic and accelerated vaccine development to prevent the spread of the virus and control the disease. Given the sustained high infectivity and evolution of SARS-CoV-2, there is an ongoing interest in developing COVID-19 serology tests to monitor population-level immunity. To address this critical need, we designed a paper-based multiplexed vertical flow assay (xVFA) using five structural proteins of SARS-CoV-2, detecting IgG and IgM antibodies to monitor changes in COVID-19 immunity levels. Our platform not only tracked longitudinal immunity levels but also categorized COVID-19 immunity into three groups: protected, unprotected, and infected, based on the levels of IgG and IgM antibodies. We operated two xVFAs in parallel to detect IgG and IgM antibodies using a total of 40 μL of human serum sample in <20 min per test. After the assay, images of the paper-based sensor panel were captured using a mobile phone-based custom-designed optical reader and then processed by a neural network-based serodiagnostic algorithm. The serodiagnostic algorithm was trained with 120 measurements/tests and 30 serum samples from 7 randomly selected individuals and was blindly tested with 31 serum samples from 8 different individuals, collected before vaccination as well as after vaccination or infection, achieving an accuracy of 89.5%. The competitive performance of the xVFA, along with its portability, cost-effectiveness, and rapid operation, makes it a promising computational point-of-care (POC) serology test for monitoring COVID-19 immunity, aiding in timely decisions on the administration of booster vaccines and general public health policies to protect vulnerable populations.

A new analytical method for chronic kidney disease (CKD) detection utilizing paper spray mass spectrometry (PS-MS) combined with machine learning is presented. The analytical protocol is rapid and simple, based on metabolic profile alterations in urine. Anonymized raw urine samples were deposited (10 μL each) onto pointed PS-MS sample strips. Without waiting for the sample to dry, 75 μL of acetonitrile and high voltage were applied to the strips, using high resolution mass spectrometry measurement (15 s per sample) with polarity switching to detect a wide range of metabolites. Random forest machine learning was used to classify the resulting data. The diagnostic performance for the potential diagnosis of CKD was evaluated for accuracy, sensitivity, and specificity, achieving results >96% for the training data and >91% for validation and test data sets. Metabolites selected by the classification model as up- or down-regulated in healthy or CKD samples were tentatively identified and in agreement with previously reported literature. The potential utilization of this approach to discriminate albuminuria categories (normo, micro, and macroalbuminuria) was also demonstrated. This study indicates that PS-MS combined with machine learning has the potential to be used as a rapid and simple diagnostic tool for CKD.

Colorimetric paper sensors are used in various fields due to their convenience and intuitive manner. However, these sensors present low accuracy in practical use because it is difficult to distinguish color changes for a minute amount of analyte with the naked eye. Herein, we demonstrate that a machine learning (ML)-based paper sensor platform accurately determines the color changes. We fabricated a colorimetric paper sensor by adsorbing polyaniline nanoparticles (PAni-NPs), whose color changes from blue to green when the ambient pH decreases. Adding glucose oxidase (GOx) to the paper sensor enables colorimetric glucose detection. Target analytes (10 μL) were aliquoted onto the paper sensors, and their images were taken with a smartphone under the same conditions in a darkroom. The red-green-blue (RGB) data from the images were extracted and used to train and test three regression models: support vector regression (SVR), decision tree regression (DTR), and random forest regression (RFR). Of the three regression models, RFR performed the best at estimating pH levels ( R 2 = 0.957) ranging from pH 2 to 10 and glucose concentrations ( R 2 = 0.922) ranging from 0 to 10 mg mL -1 .

Caused by the tick-borne spirochete Borrelia burgdorferi , Lyme disease (LD) is the most common vector-borne infectious disease in North America and Europe. Though timely diagnosis and treatment are effective in preventing disease progression, current tests are insensitive in early stage LD, with a sensitivity of <50%. Additionally, the serological testing currently recommended by the U.S. Center for Disease Control has high costs (>$400/test) and extended sample-to-answer timelines (>24 h). To address these challenges, we created a cost-effective and rapid point-of-care (POC) test for early-stage LD that assays for antibodies specific to seven Borrelia antigens and a synthetic peptide in a paper-based multiplexed vertical flow assay (xVFA). We trained a deep-learning-based diagnostic algorithm to select an optimal subset of antigen/peptide targets and then blindly tested our xVFA using human samples ( N (+) = 42, N (-) = 54), achieving an area-under-the-curve (AUC), sensitivity, and specificity of 0.950, 90.5%, and 87.0%, respectively, outperforming previous LD POC tests. With batch-specific standardization and threshold tuning, the specificity of our blind-testing performance improved to 96.3%, with an AUC and sensitivity of 0.963 and 85.7%, respectively.

Paper spray ionization has been used as a fast sampling/ionization method for the direct mass spectrometric analysis of biological samples at ambient conditions. Here, we demonstrated that by utilizing paper spray ionization-mass spectrometry (PSI-MS) coupled with field asymmetric waveform ion mobility spectrometry (FAIMS), predictive metabolic and lipidomic profiles of routine breast core needle biopsies could be obtained effectively. By the combination of machine learning algorithms and pathological examination reports, we developed a classification model, which has an overall accuracy of 87.5% for an instantaneous differentiation between cancerous and noncancerous breast tissues utilizing metabolic and lipidomic profiles. Our results suggested that paper spray ionization-ion mobility spectrometry-mass spectrometry (PSI-IMS-MS) is a powerful approach for rapid breast cancer diagnosis based on altered metabolic and lipidomic profiles.

Pre-evaluating scientific paper quality aids in alleviating peer review pressure and fostering scientific advancement. Although prior studies have identified numerous quality-related features, their effectiveness and representativeness of paper content remain to be comprehensively investigated. Addressing this issue, we propose a content-based interpretable method for pre-evaluating the quality of scientific papers. Firstly, we define quality attributes of computer science (CS) papers as integrity, clarity, novelty, and significance, based on peer review criteria from 11 top-tier CS conferences. We formulate the problem as two classification tasks: Accepted/Disputed/Rejected (ADR) and Accepted/Rejected (AR). Subsequently, we construct fine-grained features from metadata and knowledge entity networks, including text structure, readability, references, citations, semantic novelty, and network structure. We empirically evaluate our method using the ICLR paper dataset, achieving optimal performance with the Random Forest model, yielding F1 scores of 0.715 and 0.762 for the two tasks, respectively. Through feature analysis and case studies employing SHAP interpretable methods, we demonstrate that the proposed features enhance the performance of machine learning models in scientific paper quality evaluation, offering interpretable evidence for model decisions.

One of the most widely used measures of scientific impact is the number of citations. However, due to its heavy-tailed distribution, citations are fundamentally difficult to predict but can be improved. This study was aimed at investigating the factors and parts influencing the citation number of a scientific paper in the otology field. Therefore, this work proposes a new solution that utilizes machine learning and natural language processing to process English text and provides a paper citation as the predicted results. Different algorithms are implemented in this solution, such as linear regression, boosted decision tree, decision forest, and neural networks. The application of neural network regression revealed that papers' abstracts have more influence on the citation numbers of otological articles. This new solution has been developed in visual programming using Microsoft Azure machine learning at the back end and Programming Without Coding Technology at the front end. We recommend using machine learning models to improve the abstracts of research articles to get more citations., Competing Interests: The authors declare that they have no conflict of interest., (Copyright © 2022 Yousef A. Alohali et al.)

Computer scientists often publish their source code accompanying their publications, prominently using code repositories across various domains. Despite the concurrent existence of scholarly articles and their associated official code repositories, explicit references linking the two are often missing. Traditionally, identifying whether scholarly content and code repositories pertain to the same research project requires manual inspection, a time-consuming task. This paper proposes a deep learning-based algorithm for automatically matching scholarly articles with their corresponding official code repositories. Our findings indicate that the most common linking information includes the paper title and BibTeX entries, typically found in the repository’s readme document. In this study, we employed SPECTER for vector embedding of paper and repository metadata. Utilizing these embedding representations with the Light Gradient Boosting Machine (LGBM), our method achieved an F1 score of 0.94. Moreover, combining our best model with a rule-based approach improved performance by 5.31%. This study successfully delineates a connection between academic papers and associated official code repositories, minimizing reliance on explicit bibliographic information in repositories.

Machine-learning techniques are used in this BJPsych special issue on precision medicine in attempts to create statistical models that make clinically relevant predictions for individual patients. In this primer, we outline five key points that are helpful for a new reader to consider in order to engage with the field and evaluate the literature. These points include the consideration of why we are interested in new statistical approaches, how they may produce individualised predictions, what caveats need to be kept in-mind and why the interest and engagment of clinicians and clinical researchers is critical to successful model development and implementation. We hope that the following primer will provide shared understanding to encourage dialogue between clinical and methodological fields.

It is difficult to predict index values or stock prices with a single financial formula. They are affected by many factors, such as political conditions, global economy, unexpected events, market anomalies, and the characteristics of the relevant companies, and many computer science techniques are being used to make more accurate predictions about them. This study aimed to predict the values of the XKAGT index by using the monthly closing values of the Borsa Istanbul (BIST) Forestry, Paper and Printing (XKAGT) index between 2002 and 2023, and the machine learning techniques artificial neural networks (ANN), random forest (RF), k-nearest neighbor (KNN), and gradient boosting machine (GBM). Furthermore, the performances of four machine learning techniques were compared. Factors affecting stock prices are generally classified as macroeconomic and microeconomic factors. As a result of examining the studies on determining the macroeconomic factors affecting the stock markets, 10 macroeconomic factors were determined as input. The macroeconomic variables used were crude oil price, exchange rate of USD/TRY, dollar index, BIST100 index, gold price, money supply (M2), S&P 500 index, US 10-year bond interest, export-import coverage rate in the forest products sector, and deposits interest rate. It was determined that all machine learning techniques used in the study performed successfully in predicting the index value, but the k-nearest neighbor algorithm showed the best performance with R2=0.996, RMSE=71.36, and a MAE of 40.8. Therefore, in line with the current variables, investors can make analyzes using any of the ANN, RF, KNN, and GBM techniques to predict the future index value, which will lead them to accurate results.

Since the fusing process in electrophotography has a significant impact not only on printing quality but also on machine internal temperature and toner blocking on outlet tray, accurate paper temperature prediction for various types of papers is essential, especially in the production printing. To develop the thermophysical model of fusing process to predict the paper temperature after the fusing process, thermal properties such as thermal conductivity, specific heat, and thermal contact resistance of several types of papers are necessary. However, paper is composed of complex fiber, surface coating, filler, and moisture, making it difficult to measure thermophysical properties of paper accurately. This work developed a machine learning (ML) model that can predict the thermophysical properties of paper based on a conventionally used 1D thermal network model of the fusing process and experiment results. The thermophysical properties of each paper obtained by ML and the thermophysical properties obtained by the conventional method were input to the thermal network model to predict the paper temperature after the fusing process and compared with the measured paper temperatures of the experiment. The results showed that the paper temperature was predicted with higher accuracy by using thermophysical properties obtained by ML than that by the conventional method. Although the method for predicting paper temperature by using only ML had been proposed, it had the disadvantage of requiring a large number of training experiments. In contrast, this method trained under the conditions of one fusing temperature and two printing speeds, and was able to predict under five fusing temperatures and four printing speeds. [ABSTRACT FROM AUTHOR]

Objective: To identify and highlight research papers representing noteworthy developments in signals, sensors, and imaging informatics in 2020., Method: A broad literature search was conducted on PubMed and Scopus databases. We combined Medical Subject Heading (MeSH) terms and keywords to construct particular queries for sensors, signals, and image informatics. We only considered papers that have been published in journals providing at least three articles in the query response. Section editors then independently reviewed the titles and abstracts of preselected papers assessed on a three-point Likert scale. Papers were rated from 1 (do not include) to 3 (should be included) for each topical area (sensors, signals, and imaging informatics) and those with an average score of 2 or above were subsequently read and assessed again by two of the three co-editors. Finally, the top 14 papers with the highest combined scores were considered based on consensus., Results: The search for papers was executed in January 2021. After removing duplicates and conference proceedings, the query returned a set of 101, 193, and 529 papers for sensors, signals, and imaging informatics, respectively. We filtered out journals that had less than three papers in the query results, reducing the number of papers to 41, 117, and 333, respectively. From these, the co-editors identified 22 candidate papers with more than 2 Likert points on average, from which 14 candidate best papers were nominated after intensive discussion. At least five external reviewers then rated the remaining papers. The four finalist papers were found using the composite rating of all external reviewers. These best papers were approved by consensus of the International Medical Informatics Association (IMIA) Yearbook editorial board., Conclusions: Sensors, signals, and imaging informatics is a dynamic field of intense research. The four best papers represent advanced approaches for combining, processing, modeling, and analyzing heterogeneous sensor and imaging data. The selected papers demonstrate the combination and fusion of multiple sensors and sensor networks using electrocardiogram (ECG), electroencephalogram (EEG), or photoplethysmogram (PPG) with advanced data processing, deep and machine learning techniques, and present image processing modalities beyond state-of-the-art that significantly support and further improve medical decision making., Competing Interests: Disclosure The authors report no conflicts of interest in this work., (IMIA and Thieme. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/).)

Machine learning, a branch of artificial intelligence, is increasingly used in health research, including nursing and maternal outcomes research. Machine learning algorithms are complex and involve statistics and terminology that are not common in health research. The purpose of this methods paper is to describe three machine learning algorithms in detail and provide an example of their use in maternal outcomes research. The three algorithms, classification and regression trees, least absolute shrinkage and selection operator, and random forest, may be used to understand risk groups, select variables for a model, and rank variables' contribution to an outcome, respectively. While machine learning has plenty to contribute to health research, it also has some drawbacks, and these are discussed as well. To provide an example of the different algorithms' function, they were used on a completed cross-sectional study examining the association of oxytocin total dose exposure with primary cesarean section. The results of the algorithms are compared to what was done or found using more traditional methods., (© 2021 Wiley Periodicals LLC.)

The development and implementation of clinical decision support (CDS) that trains itself and adapts its algorithms based on new data-here referred to as Adaptive CDS-present unique challenges and considerations. Although Adaptive CDS represents an expected progression from earlier work, the activities needed to appropriately manage and support the establishment and evolution of Adaptive CDS require new, coordinated initiatives and oversight that do not currently exist. In this AMIA position paper, the authors describe current and emerging challenges to the safe use of Adaptive CDS and lay out recommendations for the effective management and monitoring of Adaptive CDS., (© The Author(s) 2021. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Oil–paper insulation is the critical insulation element in the modern power system. Under a harsh operating environment, oil–paper insulation will deteriorate gradually, resulting in electrical accidents. Thus, it is important to evaluate and monitor the insulation state of oil–paper insulation. Firstly, this paper introduces the geometric structure and physical components of oil–paper insulation and shows the main reasons and forms of oil–paper insulation's degradation. Then, this paper reviews the existing condition assessment techniques for oil–paper insulation, such as the dissolved gas ratio analysis, aging kinetic model, cellulose–water adsorption isotherm, oil–paper moisture balance curve, and dielectric response technique. Additionally, the advantages and limitations of the above condition assessment techniques are discussed. In particular, this paper highlights the dielectric response technique and introduces its evaluation principle in detail: (1) collecting the dielectric response data, (2) extracting the feature parameters from the collected dielectric response data, and (3) establishing the condition assessment models based on the extracted feature parameters and the machine learning techniques. Finally, two full potential studies are proposed, which research hotspots' oil–paper insulation and the electrical–chemical joint evaluation technique. In summary, this paper concludes the principles, advantages and limitation of the existing condition assessment techniques for oil–paper insulation, and we put forward two potential research avenues. [ABSTRACT FROM AUTHOR]

The printing process of box packaging paper can generate volatile organic compounds, resulting in odors that impact product quality and health. An efficient, objective, and cost-effective detection method is urgently needed. We utilized a self-developed electronic nose system to test four different cigarette packaging paper samples. Employing multivariate statistical methods like Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA), Statistical Quality Control (SQC), and Similarity-based Independent Modeling of Class Analogy (SIMCA), we analyzed and processed the collected data. Comprehensive evaluation and quality control models were constructed to assess sample stability and distinguish odors. Results indicate that our electronic nose system rapidly detects odors and effectively performs quality control. By establishing models for quality stability control, we successfully identified samples with acceptable quality and those with odors. To further validate the system’s performance and extend its applications, we collected two types of cigarette packaging paper samples with odor data. Using data augmentation techniques, we expanded the dataset and achieved an accuracy rate of 0.9938 through classification and discrimination. This highlights the significant potential of our self-developed electronic nose system in recognizing cigarette packaging paper odors and odorous samples.

A longstanding issue with knowledge bases that discuss drug-drug interactions (DDIs) is that they are inconsistent with one another. Computerized support might help experts be more objective in assessing DDI evidence. A requirement for such systems is accurate automatic classification of evidence types. In this pilot study, we developed a hierarchical classifier to classify clinical DDI studies into formally defined evidence types. The area under the ROC curve for sub-classifiers in the ensemble ranged from 0.78 to 0.87. The entire system achieved an F1 of 0.83 and 0.63 on two held-out datasets, the latter consisting focused on completely novel drugs from what the system was trained on. The results suggest that it is feasible to accurately automate the classification of a sub-set of DDI evidence types and that the hierarchical approach shows promise. Future work will test more advanced feature engineering techniques while expanding the system to classify a more complex set of evidence types., (©2020 AMIA - All rights reserved.)

The task of predicting the interactions between drugs and targets plays a key role in the process of drug discovery. There is a need to develop novel and efficient prediction approaches in order to avoid costly and laborious yet not-always-deterministic experiments to determine drug-target interactions (DTIs) by experiments alone. These approaches should be capable of identifying the potential DTIs in a timely manner. In this article, we describe the data required for the task of DTI prediction followed by a comprehensive catalog consisting of machine learning methods and databases, which have been proposed and utilized to predict DTIs. The advantages and disadvantages of each set of methods are also briefly discussed. Lastly, the challenges one may face in prediction of DTI using machine learning approaches are highlighted and we conclude by shedding some lights on important future research directions., (© The Author(s) 2020. Published by Oxford University Press.)

In this era of knowledge, academic researchers are growing every day, this also spikes a growth in published literature on the new innovations and findings. This leads to a problem where the reviewers at the conferences must go through many research papers to determine whether they are suitable for the conference or not. This problem has caused the necessity of an effective paper screening tool for optimizing the literature review process. This research presents a development of a new Paper Screening Tool (PST) aimed at increasing the efficiency and accuracy of the literature screening phase. Leveraging the NPL processing techniques this PST and reduces a lot of manual efforts. Through comprehensive evaluation using a diverse dataset, the tools provide high precision. The PST also has user friendly interfaces and customizable report generation which empowers the researchers screening process to their specific needs. This paper contributes to literature by solving the challenge of information overloading during the literature review. [ABSTRACT FROM AUTHOR]

Objectives: The International Society for Bipolar Disorders Big Data Task Force assembled leading researchers in the field of bipolar disorder (BD), machine learning, and big data with extensive experience to evaluate the rationale of machine learning and big data analytics strategies for BD., Method: A task force was convened to examine and integrate findings from the scientific literature related to machine learning and big data based studies to clarify terminology and to describe challenges and potential applications in the field of BD. We also systematically searched PubMed, Embase, and Web of Science for articles published up to January 2019 that used machine learning in BD., Results: The results suggested that big data analytics has the potential to provide risk calculators to aid in treatment decisions and predict clinical prognosis, including suicidality, for individual patients. This approach can advance diagnosis by enabling discovery of more relevant data-driven phenotypes, as well as by predicting transition to the disorder in high-risk unaffected subjects. We also discuss the most frequent challenges that big data analytics applications can face, such as heterogeneity, lack of external validation and replication of some studies, cost and non-stationary distribution of the data, and lack of appropriate funding., Conclusion: Machine learning-based studies, including atheoretical data-driven big data approaches, provide an opportunity to more accurately detect those who are at risk, parse-relevant phenotypes as well as inform treatment selection and prognosis. However, several methodological challenges need to be addressed in order to translate research findings to clinical settings., (© 2019 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

The evaluation and classification of chemical properties in different copy-paper products could significantly help address document forgery. This study analyzes the feasibility of utilizing infrared spectroscopy in conjunction with machine learning algorithms for classifying copy-paper products. A dataset comprising 140 infrared spectra of copy-paper samples was collected. The classification models employed in this study include partial least squares-discriminant analysis, support vector machine, and K-nearest neighbors. The key findings indicate that a classification model based on the use of attenuated-total-reflection infrared spectroscopy demonstrated good performance, highlighting its potential as a valuable tool in accurately classifying paper products and ensuring assisting in solving criminal cases involving document forgery.

Objective: To assess the current trends in the field of artificial intelligence in medicine by analysing 100 most cited original articles relevant to the field. Methods: The systematic review was conducted in September 2022, and comprised literature search on Scopus database for original articles only. Google and Medical Subject Headings databases were used as resources to extract key words. In order to cover a broad range of articles, original studies comprising human as well as non-human subjects, studies without abstract and studies in languages other than English were part of the inclusion criteria. There was no specific time period applied to the search and no specific selection was done regarding the journals in the database. The screening was done using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines to extract the top 100 most cited articles in the field of artificial intelligence usage in medicine. Data was analysed using SPSS 23. Results: Of the 11,571 studies identified, 100(0.86%) were analysed in detail. The studies were published between 1986 and 2021, with a median of 43 citations (IQR 53) per article. The journal ‘Artificial Intelligence in Medicine’ accounted for the highest number 9(9%)) of articles, and the United States was the country of origin for most of the articles 36(36%). Conclusion: The trends, development and shortcomings in field of artificial intelligence usage in medicine need to be understood to conduct an effective research in areas that still need attention, and to guide the authorities to direct their funding accordingly.

The rise of online transactions has led to a corresponding increase in online criminal activities. Account takeover attacks, in particular, are challenging to detect, and novel approaches utilize machine learning to identify compromised accounts. This paper aims to conduct a literature review on account takeover detection and user behavior analysis within the cybersecurity domain. By exploring these areas, the goal is to combat account takeovers and other fraudulent attempts effectively.

Paper mills, companies that write scientific papers and gain acceptance for them, then sell authorships of these papers, present a key challenge in medicine and other healthcare fields. This challenge is becoming more acute with artificial intelligence (AI), where AI writes the manuscripts and then the paper mills sell the authorships of these papers. The aim of the current research is to provide a method for detecting fake papers. The method reported in this article uses a machine learning approach to create decision trees to identify fake papers. The data were collected from Web of Science and multiple journals in various fields. The article presents a method to identify fake papers based on the results of decision trees. Use of this method in a case study indicated its effectiveness in identifying a fake paper. This method to identify fake papers is applicable for authors, editors, and publishers across fields to investigate a single paper or to conduct an analysis of a group of manuscripts. Clinicians and others can use this method to evaluate articles they find in a search to ensure they are not fake articles and instead report actual research that was peer reviewed prior to publication in a journal. [ABSTRACT FROM AUTHOR]

Abstract Wearable sensors are establishing themselves as options for real‐time continuous health monitoring in health care and wellness. In particular, the use of flexible interfaces that conform to the skin have attracted considerable interest for the extraction of meaningful pathophysiological information through continuous and painless sampling and analysis of biofluids. In contrast, conventional techniques for biomarkers analysis are difficult to adapt to real‐time portable monitoring due to their invasive sampling protocols, biosample preparation and reagent stabilization. Here a shelf‐stable, non‐invasive, paper‐based colorimetric wearable lactate sensor is reported. This sensor exploits the ability of silk to control the concentration, print, and functionally preserve labile transducing biomolecules in the format of a shelf‐stable digital patch for optical readout. This novel approach overcomes major challenges associated with the commercialization of colorimetric wearable sensors (e.g., enzyme thermal instability, narrow sensing range, low sensitivity, and qualitative response) by showing a combination of unprecedented stability (i.e., up to 2 years in refrigerated conditions), wide sensing range, and high sensitivity. Additionally, real‐time quantitative signal readouts are achieved using machine learning‐driven image analysis enabling physiological status evaluation with a simple smartphone camera.

It is difficult to predict index values or stock prices with a single financial formula. They are affected by many factors, such as political conditions, global economy, unexpected events, market anomalies, and the characteristics of the relevant companies, and many computer science techniques are being used to make more accurate predictions about them. This study aimed to predict the values of the XKAGT index by using the monthly closing values of the Borsa Istanbul (BIST) Forestry, Paper and Printing (XKAGT) index between 2002 and 2023, and the machine learning techniques artificial neural networks (ANN), random forest (RF), k-nearest neighbor (KNN), and gradient boosting machine (GBM). Furthermore, the performances of four machine learning techniques were compared. Factors affecting stock prices are generally classified as macroeconomic and microeconomic factors. As a result of examining the studies on determining the macroeconomic factors affecting the stock markets, 10 macroeconomic factors were determined as input. The macroeconomic variables used were crude oil price, exchange rate of USD/TRY, dollar index, BIST100 index, gold price, money supply (M2), S&P 500 index, US 10-year bond interest, export-import coverage rate in the forest products sector, and deposits interest rate. It was determined that all machine learning techniques used in the study performed successfully in predicting the index value, but the k-nearest neighbor algorithm showed the best performance with R2=0.996, RMSE=71.36, and a MAE of 40.8. Therefore, in line with the current variables, investors can make analyzes using any of the ANN, RF, KNN, and GBM techniques to predict the future index value, which will lead them to accurate results. [ABSTRACT FROM AUTHOR]

We used the random forest classifier to predict Gross Motor Function Classification System (GMFCS) levels I-IV from patient reported abilities recorded on the Gillette Functional Assessment Questionnaire (FAQ). The classifier exhibited outstanding accuracy across GMFCS levels I-IV, with 83%-91% true positive rate (TPR), area under the receiver operation characteristic (ROC) curve greater than 0.96 for all levels, and misclassification by more than one level only occurring 1.2% of the time. This new approach to GMFCS level assignment overcomes several difficulties with the current method: (i) it is based on a broad spectrum of functional abilities, (ii) it resolves functional ability profiles that conflict with existing GMFCS level definitions, (iii) it is based entirely on self-reported abilities, and (iv) it removes complex age dependence. Further work is needed to examine inter-center differences in classifier performance-which would most likely reflect interpretive differences in GMFCS level definitions between centers., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The growth of artificial intelligence combined with the collection and storage of large amounts of data in the electronic medical record collection has created an opportunity for orthopedic research and translation into the clinical environment. Machine learning (ML) is a type of artificial intelligence tool well suited for processing the large amount of available data. Specific areas of ML frequently used by orthopedic surgeons performing total joint arthroplasty include tabular data analysis (spreadsheets), medical imaging processing, and natural language processing (extracting concepts from text). Previous studies have discussed models able to identify fractures in radiographs, identify implant type in radiographs, and determine the stage of osteoarthritis based on walking analysis. Despite the growing popularity of ML, there are limitations including its reliance on "good" data, potential for overfitting, long life cycle for creation, and ability to only perform one narrow task. This educational article will further discuss a general overview of ML, discussing these challenges and including examples of successfully published models. [Display omitted] [ABSTRACT FROM AUTHOR]

This paper reflects the research to design and application the complex method to evaluate the quality of the paper written in the IMRaD format. As a field we choose Russian segment of the financial technologies area since we had interest to use multilingual language model. The method covers paper's relevance to the chosen field and internal topics, the actuality, relation between parts, text borrowing, and experiment part. The clustering and classifying algorithms, and language machine learning model were used. The experimental part based on corpus of Russian papers shows the deviation of method's recommendations from expert opinion not more than 20%. The results may be interested not only reviewers but student as authors of futures papers to avoid common mistakes during paper's writing. [ABSTRACT FROM AUTHOR]

The article discusses the potential of advanced technologies in the field of cultural heritage. It highlights how these technologies, such as virtual reality, artificial intelligence, and 3D printing, can be used to understand, preserve, and enhance cultural heritage. The article also presents scientific papers from the Florence Heri-Tech International Conference, showcasing the various applications of these technologies. The papers cover topics such as the use of hyperspectral imaging for hieroglyph recognition, the enhancement of user experience in cultural spaces through advanced systems, and the use of non-invasive techniques for conservation. Overall, the article emphasizes the significant impact of technology on the research, preservation, and promotion of cultural heritage. [Extracted from the article]

Identifying factors that associate with more cited or higher quality research may be useful to improve science or to support research evaluation. This article reviews evidence for the existence of such factors in article text and metadata. It also reviews studies attempting to estimate article quality or predict long‐term citation counts using statistical regression or machine learning for journal articles or conference papers. Although the primary focus is on document‐level evidence, the related task of estimating the average quality scores of entire departments from bibliometric information is also considered. The review lists a huge range of factors that associate with higher quality or more cited research in some contexts (fields, years, journals) but the strength and direction of association often depends on the set of papers examined, with little systematic pattern and rarely any cause‐and‐effect evidence. The strongest patterns found include the near universal usefulness of journal citation rates, author numbers, reference properties, and international collaboration in predicting (or associating with) higher citation counts, and the greater usefulness of citation‐related information for predicting article quality in the medical, health and physical sciences than in engineering, social sciences, arts, and humanities. [ABSTRACT FROM AUTHOR]