Search

This paper presents a fast and generalized space vector pulse width modulation (SVPWM) scheme for any multilevel inverter. The SVPWM scheme generates all the available switching states and switching sequences based on two simple and general mappings, and calculates the duty cycles simply as if for a two-level SVPWM, thus independent of the level number of the inverter. Because the switching states, duty cycles, and switching sequences are all obtained by simple calculation in the proposed SVPWM scheme, no lookup table is needed and the scheme is computationally fast. The generalized method of generating the switching states (first mapping), calculating the duty cycles, and determining the switching sequence (second mapping) is described in this paper. The scheme is suitable for any reference vector with any modulation index, and can be conveniently extended to meet specific requirements, such as symmetric switching sequences. Compared with prior methods, the SVPWM scheme proposed in this paper provides two more degrees of freedom, i.e., the adjustable switching sequences and duty cycles, thus offering significant flexibility for optimizing the performance of multilevel inverters. The influence of redundant switching sequences in the output phase voltage of inverters is demonstrated for a nine-level inverter. This paper also thoroughly compares the proposed SVPWM scheme with prior methods. Both simulation and experimental results are given. [ABSTRACT FROM AUTHOR]

Distributed energy resources (DERs) are expected to provide ancillary functions including reactive power generation and harmonics compensation. Meanwhile, multilevel inverters and two-level converters with optimal pulsewidth modulation (OPWM) will be commonly used for DERs at high power levels. The challenge is to realize harmonic compensation with limited switching angles. This paper presents an online solution to realize the selective harmonics compensation (SHC), and power generation with DERs. For harmonics compensation, the selective harmonic components in the load current are detected. Then, the harmonic voltages are provided with DERs to cancel out these detected components. Since the power converter is requested to realize both harmonics filtering and power generation, limitations on harmonics compensation at the given power are discussed. Power hardware-in-the-loop-based online verifications are shown at the end of the paper. [ABSTRACT FROM AUTHOR]

In this paper, a novel space-vector pulse-width modulation (PWM) scheme for reducing the common-mode voltage (CMV) in the three-phase five-level active neutral-point clamped (5L-ANPC) inverter is proposed, where only the 55 selected voltage vectors among the entire 125 that produce low values of the CMV are utilized. This PWM scheme can significantly reduce the CMV without the increase of switching losses and total harmonic distortion of the output voltages. With the 55 selected voltage vectors, the inverter can still operate up to the maximum modulation index. In addition, the capacitor voltages are controlled by redundant switches of the 5L-ANPC inverters. It has been shown that the peak value of the CMV is decreased to one-twelfth of the dc-link voltage from the simulation and experimental results. [ABSTRACT FROM PUBLISHER]

The flying capacitor multilevel inverter (FCMLI) is one of the well-known structures of multilevel inverters having attracted considerable attention because of its merits. In spite of its many advantages, it has some limitations such as high volume and complicated control method because of its bulky capacitors and their voltage balancing requirement. Moreover, the high number of power semiconductors required makes this structure susceptible to failure. To increase the ratio of the number of levels to the number of components, an uneven distribution of capacitor voltages has been suggested in previous reports; however, this approach complicates the control method. Up to now, almost all presented methods suffer from high computational load and/or structure-dependent algorithm. In this paper, a simple state-based and structure-independent method is proposed for capacitor voltage regulation. The proposed method is straightforward and can perform online computation of switching sequences in a computationally efficient manner without any need for stored information or look-up tables. The method is conveniently extendible to any number of cells and levels in an FCMLI structure with arbitrary dc link voltage distribution schemes. Simulation and experimental results show the effectiveness and simplicity of this method. [ABSTRACT FROM PUBLISHER]

A capacitor voltage-balancing method for a nested neutral point clamped (NNPC) inverter is proposed in this paper. The NNPC inverter is a newly developed four-level voltage-source inverter for medium-voltage applications with properties such as operating over a wide range of voltages (2.4–7.2 kV) without the need for connecting power semiconductor in series and high-quality output voltage. The NNPC topology has two flying capacitors in each leg. In order to ensure that the inverter can operate normally and all switching devices share identical voltage stress, the voltage across each capacitor should be controlled and maintained at one-third of dc bus voltage. The proposed capacitor voltage-balancing method takes advantage of redundancy in phase switching states to control and balance flying capacitor voltages. Simple and effective logic tables are developed for the balancing control. The proposed method is easy to implement and needs very few computations. Moreover, the method is suitable for and easy to integrate with different pulse width modulation schemes. The effectiveness and feasibility of the proposed method is verified by simulation and experiment. [ABSTRACT FROM PUBLISHER]

This paper introduces a novel pulse width modulation (PWM) technique to eliminate common-mode voltage in odd-multilevel inverters using the three zero common-mode vectors principles. Similarly, as in conventional PWM for multilevel inverters, this PWM can be properly depicted in an active two-level voltage inverter. With the help of two standardized PWM patterns, the characteristics of the PWM process can be fully explored in that active inverter as a switching time diagram and switching state sequence. Due to an unequal number of commutations of three phases in each sampling period, the switching loss is optimized by a proposed current-based mapping algorithm. The switching loss reduction can be up to 25% compared to the same PWM technique with nonoptimized algorithms. The PWM method has been then generalized as an equipotential PWM control, which is valid to both odd- and even-multilevel inverters . The theoretical analysis is verified by simulation and experimental results. [ABSTRACT FROM AUTHOR]