Search

The quantification of emissions of greenhouse gases and air pollutants through the inversion of plumes in satellite images remains a complex problem that current methods can only assess with significant uncertainties. The anticipated launch of the CO2M (Copernicus Anthropogenic Carbon Dioxide Monitoring) satellite constellation in 2026 is expected to provide high-resolution images of CO2 (carbon dioxide) column-averaged mole fractions (XCO2), opening up new possibilities. However, the inversion of future CO2 plumes from CO2M will encounter various obstacles. A challenge is the low CO2 plume signal-to-noise ratio due to the variability in the background and instrumental errors in satellite measurements. Moreover, uncertainties in the transport and dispersion processes further complicate the inversion task. To address these challenges, deep learning techniques, such as neural networks, offer promising solutions for retrieving emissions from plumes in XCO2 images. Deep learning models can be trained to identify emissions from plume dynamics simulated using a transport model. It then becomes possible to extract relevant information from new plumes and predict their emissions. In this paper, we develop a strategy employing convolutional neural networks (CNNs) to estimate the emission fluxes from a plume in a pseudo- XCO2 image. Our dataset used to train and test such methods includes pseudo-images based on simulations of hourly XCO2 , NO2 (nitrogen dioxide), and wind fields near various power plants in eastern Germany, tracing plumes from anthropogenic and biogenic sources. CNN models are trained to predict emissions from three power plants that exhibit diverse characteristics. The power plants used to assess the deep learning model's performance are not used to train the model. We find that the CNN model outperforms state-of-the-art plume inversion approaches, achieving highly accurate results with an absolute error about half of that of the cross-sectional flux method and an absolute relative error of ∼ 20 % when only the XCO2 and wind fields are used as inputs. Furthermore, we show that our estimations are only slightly affected by the absence of NO2 fields or a detection mechanism as additional information. Finally, interpretability techniques applied to our models confirm that the CNN automatically learns to identify the XCO2 plume and to assess emissions from the plume concentrations. These promising results suggest a high potential of CNNs in estimating local CO2 emissions from satellite images. [ABSTRACT FROM AUTHOR]

The quantification of emissions of greenhouse gases and air pollutants through the inversion of plumes in satellite images remains a complex problem that current methods can only assess with significant uncertainties. The anticipated launch of the CO2M satellite constellation in 2026 is expected to provide high-resolution images of CO2 column-averaged mole fractions (XCO2), opening up new possibilities. However, the inversion of future CO2 plumes from CO2M will encounter various obstacles. A challenge is the CO2 plume low signal-to-noise ratio, due to the variability of the background and instrumental errors in satellite measurements. Moreover, uncertainties in the transport and dispersion processes further complicate the inversion task. To address these challenges, deep learning techniques, such as neural networks, offer promising solutions for retrieving emissions from plumes in XCO2 images. Deep learning models can be trained to identify emissions from plume dynamics simulated using a transport model. It then becomes possible to extract relevant information from new plumes and predict their emissions. In this paper, we employ convolutional neural networks (CNN) to estimate the emission fluxes from a plume in a pseudo XCO2 image. Our dataset used to train and test such methods includes pseudo images based on simulations of hourly XCO2, NO2 and wind fields near various power plants in Eastern Germany, tracing plumes from anthropogenic and biogenic sources. CNN models are trained to predict emissions from three power plants that exhibit diverse characteristics. The power plants used to assess the deep learning model's performance are not used to train the model. We find that the CNN model outperforms state of the art plume inversion approaches, achieving highly accurate results with an absolute error about half of that of the cross-sectional flux method. Furthermore, we show that our estimations are only slightly affected by the absence of NO2 fields or a detection mechanism as additional information. Finally, interpretability techniques applied to our models confirm that the CNN automatically learns to identify the XCO2 plume and to assess emissions from the plume concentrations. These promising results suggest a high potential of CNNs in estimating local CO2 emissions from satellite images. [ABSTRACT FROM AUTHOR]

Local credit cooperatives have long played an important role in local financial services. It has made a significant contribution to agricultural production, farmers' incomes, and the economic development of rural areas. In particular, as a financial instrument serving farmers, microfinance management by local credit cooperatives plays a key role in pursuing profits and fulfilling social responsibility. It was therefore important to obtain effective instruments for combating poverty in rural areas from all walks of society. This paper first outlines the development of microfinance loans in Germany and other countries and describes the current situation and some of the challenges facing local credit cooperatives in financial management. Next, we present the basic concepts of data mining, describe the common methods and key techniques of data mining, analyze and compare the properties of the individual data, and show how the associated mining can actually be performed. Next, we will explain the basic model of microfinance for farmers and some risks in detail and analyze and evaluate the characteristics of these risks in the context of local credit cooperatives. As a result, this paper proposes an improved deep convolutional neural network. The optimized algorithm selects the optimal weight threshold value and different iteration times. The results are fewer errors, the results are closer to the correct data, and the efficiency is better than before. The algorithm is more efficient because errors have been greatly reduced and the time spent on them has been slightly reduced. [ABSTRACT FROM AUTHOR]

• Soil reflectance composites were generated with Sentinel-2 L2A data. • A multi-channel CNN learning framework for soil organic carbon prediction is proposed. • A dual input deep learning architecture improves the predictions. • The framework produced results that can be interpreted. The Copernicus Sentinel-2 multispectral imagery data may be aggregated to extract large-scale, bare soil, reflectance composites, which enable soil mapping applications. In this paper, this approach was tested in the German federal state of Bavaria, to provide estimations for soil organic carbon (SOC). Different temporal ranges were considered for the generation of the composites, including multi-annual and seasonal ranges. A novel multi-channel convolutional neural network (CNN) is proposed. By leveraging the advantages of deep learning techniques, it utilizes complementary information from different spectral pre-treatment techniques. The SOC predictions indicated little dissimilarity amongst the different composites, with the best performance attained for the six-year composite containing only spring months (RMSE = 12.03 g C · kg−1, R2 = 0.64, RPIQ = 0.89). It has been demonstrated that these outcomes outperform other well-known machine learning techniques. An ablation analysis was accordingly performed to evaluate the interplay of the CNN's different components to disentangle the advantages of each aspect of the proposed framework. Finally, a DUal inPut deep LearnIng architecture, named DUPLICITE, is proposed, which concatenates deep spectral features derived from the CNN mentioned earlier, as well as topographical and environmental covariates through an artificial neural network (ANN) to exploit their complementarity. The proposed approach was demonstrated to provide an improvement in the overall prediction performance (RMSE = 11.60 gC · kg−1, R2 = 0.67, RPIQ = 0.92). [ABSTRACT FROM AUTHOR]

Industry 4.0, a term invented by Wolfgang Wahlster in Germany, is celebrating its 10th anniversary in 2021. Still, the digitalization of the production environment is one of the hottest topics in the computer science departments at universities and companies. Optimization of production processes or redefinition of the production concepts is meaningful in light of the current industrial and research agendas. Both the mentioned optimization and redefinition are considered in numerous subtopics and technologies. One of the most significant topics in these areas is the newest findings and applications of artificial intelligence (AI)—machine learning (ML) and deep convolutional neural networks (DCNNs). The authors invented a method and device that supports the wiring assembly in the control cabinet production process, namely, the Wire Label Reader (WLR) industrial system. The implementation of this device was a big technical challenge. It required very advanced IT technologies, ML, image recognition, and DCNN as well. This paper focuses on an in-depth description of the underlying methodology of this device, its construction, and foremostly, the assembly industrial processes, through which this device is implemented. It was significant for the authors to validate the usability of the device within mentioned production processes and to express both advantages and challenges connected to such assembly process development. The authors noted that in-depth studies connected to the effects of AI applications in the presented area are sparse. Further, the idea of the WLR device is presented while also including results of DCNN training (with recognition results of 99.7% although challenging conditions), the device implementation in the wire assembly production process, and its users' opinions. The authors have analyzed how the WLR affects assembly process time and energy consumption, and accordingly, the advantages and challenges of the device. Among the most impressive results of the WLR implementation in the assembly process one can be mentioned—the device ensures significant process time reduction regardless of the number of characters printed on a wire. [ABSTRACT FROM AUTHOR]

Storms can cause significant damage to forest areas, affecting biodiversity and infrastructure and leading to economic loss. Thus, rapid detection and mapping of windthrows are crucially important for forest management. Recent advances in computer vision have led to highly-accurate image classification algorithms such as Convolutional Neural Network (CNN) architectures. In this study, we tested and implemented an algorithm based on CNNs in an ArcGIS environment for automatic detection and mapping of damaged areas. The algorithm was trained and tested on a forest area in Bavaria, Germany.. It is a based on a modified U-Net architecture that was optimized for the pixelwise classification of multispectral aerial remote sensing data. The neural network was trained on labeled damaged areas from after-storm aerial orthophotos of a ca. 109 k m 2 forest area with RGB and NIR bands and 0.2-m spatial resolution. Around 10 7 pixels of labeled data were used in the process. Once the network is trained, predictions on further datasets can be computed within seconds, depending on the size of the input raster and the computational power used. The overall accuracy on our test dataset was 92 % . During visual validation, labeling errors were found in the reference data that somewhat biased the results because the algorithm in some instance performed better than the human labeling procedure, while missing areas affected by shadows. Our results are very good in terms of precision, and the methods introduced in this paper have several additional advantages compared to traditional methods: CNNs automatically detect high- and low-level features in the data, leading to high classification accuracies, while only one after-storm image is needed in comparison to two images for approaches based on change detection. Furthermore, flight parameters do not affect the results in the same way as for approaches that require DSMs and DTMs as the classification is only based on the image data themselves, and errors occurring in the computation of DSMs and DTMs do not affect the results with respect to the z component. The integration into the ArcGIS Platform allows a streamlined workflow for forest management, as the results can be accessed by mobile devices in the field to allow for high-accuracy ground-truthing and additional mapping that can be synchronized back into the database. Our results and the provided automatic workflow highlight the potential of deep learning on high-resolution imagery and GIS for fast and efficient post-disaster damage assessment as a first step of disaster management. [ABSTRACT FROM AUTHOR]