Search

Resource constraints and environmental pollution are common problems that have long plagued sustainable development, and enhancing the efficiency of green development is the key to cracking the problems. Previous studies have not jointly examined the green economic production efficiency and environmental pollution control efficiency of industrial and service sectors, to fill this research gap, this paper use the constructed meta-frontier, dynamic network Super-SBM (slacks-based measure) model to evaluate the environmental efficiency in China's 30 provinces and 107 cities. The results reveal that, (1) the green production efficiency of industrial and service sectors showed a fluctuating downward trend, and the pollution control efficiency improved first and then decreased. The overall environmental efficiency of both sectors is low, indicating a strong potential for improvement of the green development in China. (2) The overall environmental efficiency of industrial and service sectors has obvious regional heterogeneity, and which decreases as the weight of treatment stage increases. Additionly, the overall environmental efficiency of industry is greater than that of service industry. (3) The input inefficiency of the production stage and output inefficiency of the treatment stage are the main sources of inefficiency for the industry and service industry. [Display omitted] • This paper construct a meta-frontier, dynamic network Super-SBM model. • We analyze historical efficiency of GEP and EPC in industrial and service sectors. • Two sectors's efficiency has not been significantly improved from 1991 to 2020. • There is sectoral, regional and stage heterogeneity in efficiency. • "High input of production" and "low output of control" hinder effectiveness. [ABSTRACT FROM AUTHOR]

An increasing amount of resources is being utilized to combat the pollution problem in China. Measuring and improving the efficiency of this resource allocation is an effective way to promote pollution treatment at the present technical level. This paper utilizes a two-stage data envelopment analysis (DEA) model to attain allocation results based on the zero-sum gain and fixed-sum gain assumptions. We divide all the inputs into discretionary and non-discretionary inputs and construct two models for allocating resources based on the environmental efficiency scores. The new models are applied to calculate the performance and resource allocation scheme of 30 Chinese provinces from 2011 to 2015. Most provinces are inefficient at controlling pollution emission or treating pollution while using the given level of input resources. Based on the production possibility set of each province in 2015, the processing capacity of wastewater and gas could be increased by 1% and 3%, respectively, by reallocating resources for pollution treatment among different provinces. Environmental efficiency scores and resource allocation plans based on various assumptions are obtained in this paper to enlighten the corresponding decision-makers. Image 1 • The paper constructs two resource allocation models based on the DEA approach. • This research considers the allocation of public pollution treatment resources between different sectors. • Two strategies for resource allocation are composed to deal with different conditions relating to resources. • We apply the new models to measure the performance of 30 regions in China. [ABSTRACT FROM AUTHOR]

Over recent decades, China's economy has continued to develop steadily and rapidly, contributing to a large environmental cost. Therefore, many researchers propose various methods to evaluate environmental efficiency to deal with these serious issues accurately. This paper is the first to evaluate environmental efficiency using a model featuring not only a parallel structure with three component processes (primary, secondary, and tertiary industries) in the first stage but also a sewage treatment process in the second stage. Simultaneously, we propose radial but also nonradial versions of the Environmental Multiple Variable Return to Scale (EMVRS) model. These two models both consider shared inputs as well as shared outputs, and the proportion of the shared inputs and shared outputs utilized in each component process is assumed to be unknown. Additionally, we further analyze the factors influencing environmental efficiency by utilizing the Tobit model. The results when EMVRS is applied to Chinese provinces can be divided into 3 parts: (1) Most provinces do not purify wastewater appropriately contributing to the bad environmental efficiency. (2) The efficiency values of the three industry types are similar or identical to each other in most provinces. (3) The population of people employed negatively impacts environmental efficiency. [ABSTRACT FROM AUTHOR]

In recent years, the rapid development of transportation industry brings economic benefits, at the same time, the problem of environmental pollution is becoming more and more serious. The emission of CO 2 intensifies the trend of global warming. How to measure the development of environment and economy is a huge challenge for us. This paper proposes a data envelopment analysis (DEA) method based on slacks-based measure (SBM) to evaluate the environmental and economic performance of the transportation industry from 2015 to 2017. According to the economic region, 30 provinces in China are divided into northeast, east, central and western regions for efficiency analysis. The model can determine the low efficiency decision units and finally put forward improvement suggestions for the low efficiency areas. [ABSTRACT FROM AUTHOR]

China Railway Express (CRE) has changed the cargo transportation between China and Europe, as well as the environmental efficiency of relevant cities. This paper uses panel data for China's 256 cities from 2005 to 2018 and multi-period difference-in-differences (DID) method to study the impact and influence mechanism of CRE on environmental efficiency. The results found that the implementation of CRE has significantly improved environmental efficiency. The opening of CRE has improved environmental performance by promoting technological innovation and reducing the introduction of polluting foreign investment. The paper further examines and verifies that there are effects on resource crowding out and knowledge spillover between cities. The opening of CRE has a much greater impact on knowledge spillover. This study provides useful policy insights for improving environmental efficiency. • Cargo transportation and environmental efficiency have been changed. • China Railway Express has significantly improved China's environmental efficiency. • Technological innovation and Foreign investment are two influence channels. • There are both pollution transfer and knowledge spillover effects between cities. [ABSTRACT FROM AUTHOR]

Environmental efficiency improvement has played a crucial role in the theory and practice of stimulating clean production. This paper analyzes the interaction between environmental efficiency and output efficiency, particularly whether they reinforce each other or compete with each other, on the basis of a data set of 137 firms in the textile industry in China's Jiangsu Province. In the first stage, generalized data envelopment analysis is applied to calculate efficiency measures of energy, waste water, waste gas, soot, and output efficiency taking capital, labor, water, and energy as inputs, industrial output value as desirable output, and waste water discharges, waste gas and soot emissions as undesirable outputs. In the second stage analysis, a structural equation model with latent variables is applied to analyze the interaction between the latent variable environmental efficiency, measured by the four observed environmental indicators, and output efficiency, taking also into account the endogenous variable profit. The main outcomes of the structural equation model are the following. Firstly, environmental efficiency negatively impacts on profit while profit positively impacts on environmental efficiency. In a similar vein, output efficiency is found to depress profit while profit increases output efficiency. Thirdly, environmental efficiency has a positive impact on output efficiency while there is no effect of output efficiency on environmental efficiency. Fourthly, taxes impair a firm's output efficiency. From the findings it follows that a swap of general taxes for an energy tax is likely to improve both output efficiency and energy efficiency. The latter outcome implies a win–win situation which will facilitate the further implementation and adoption of environmental policy. Finally, the paper illustrates the applicability of structural equation modeling in efficiency analysis. [ABSTRACT FROM AUTHOR]

Evaluating and improving the environmental efficiency of the power system is the key to achieving sustainable development. However, the classic DEA approach is susceptible to producing biased results due to its inability to address spatial dependence across factors. Considering the spatial dependence of inputs and outputs, this paper proposes a dynamic spatial network DEA model with slacks-based measure (SNSBM) to examine the environmental efficiency of China's power systems, with a focus on the undesirable outputs of CO 2 , NO x , and SO 2. The investigation incorporates the Moran's I test to account for the spatial interactions of patent counts, coal consumption, CO 2 emissions, and renewable power generation. Compared to the classic network DEA, the SNSBM results reveal distinct spatial characteristics and a heightened level of differentiation, which highlights the importance of eliminating spatial dependence. From a dynamic perspective, environmental efficiency shows a visible surge in transmission and distribution divisions after 2015, confirming the success of China's market-oriented reform. In addition, CO 2 is the largest contributor to the environmental inefficiency of the power systems, followed by NO x and SO 2. This study highlights the importance of spatial dependence and provides many insightful policy recommendations for improving the environmental efficiency of China's power systems. • A dynamic spatial network DEA model with slack measures is proposed. • A spatial weight matrix is used to introduce the spatial inputs and outputs into the spatial DEA. • Environmental efficiency of China's power systems is studied with SNSBM model. • Environmental efficiency seems to be overestimated if ignoring the factor's spatial dependence. • CO 2 contributes most to the inefficiency of China's power system compared to SO 2 and NO x. [ABSTRACT FROM AUTHOR]

Highlights • A Super-SBM with undesirable output model is applied. • The environmental efficiency of 283 Chinese cities during 2003–2016 is analyzed. • The overall environmental efficiency performance across the Chinese cities is low. • China has achieved significant improvement in environmental efficiency across survey period. Abstract In the past decades, unprecedented dramatic economic development in the Chinese cities has also brought serious environmental problems. In line with this, the Chinese government has been investing great efforts and resources in addressing environmental problems. However, little previous studies have been conducted in examining whether this development is efficient from a win-win perspective balance between economic growth and environmental protection. This paper presents a comprehensive analysis on the environmental efficiency (EE) in the process of dramatic economic development in the Chinese cities. The Super-slack-based measure (Super-SBM) model is adopted to analyze the EE performance. Data used for analysis are collected from 283 sample cities in China. The research results indicate that the overall EE performance across the Chinese cities is relatively low, and the differences in EE performance among the 283 cities are significant. The top three EE performers are Shenzhen, Sanya and Erdos, and Baiyin, Xinzhou and Liupanshui are the bottom three performers. The results also suggest that the EE performance in the Eastern area, where most first-tier cities are located in, is significantly higher than that in the Central and Western areas (aggregated with fourth and fifth tier-cities). From the dynamic perspective, the results show that China has achieved significant improvement in environmental efficiency across the surveyed period of 2003–2016. The research findings provide valuable references not only for the Chinese policy-makers and practitioners to adopt measures for promoting a win-win balance between environmental protection and economic development in the Chinese context, but also for further studies on environmental efficiency in the international context. [ABSTRACT FROM AUTHOR]

Abstract This paper estimates the shadow price of CO 2 from burning maize straw in the Chinese agricultural sector and explores the related policy implications for decision makers. Using a quadratic directional distance function, we evaluate the production inefficiency and shadow prices of CO 2 reduction for the seven major maize-producing provinces in China for 1996–2014. In general, the efficiency improves over time. Shandong province ranked as the top one with full efficiency considering both economic and environmental impacts as of 2014. The mean shadow price for the CO 2 emission was 0.45 yuan/kg (US$75/t), whereas the province-specific shadow prices varied within the interval bounded by 0 and 0.913 yuan/ha (US$152/t). The marginal abatement cost curve was downward-sloped and indicated the need for curbing CO 2 emission in areas exhibiting the highest pollution rates. Given the marginal abatement cost patterns, the transaction costs associated with implementation of the conservation practices (tillage) should not exceed 335 yuan/ha in order to ensure the welfare gains. This government-provided payment would compensate farmers for yield reductions in favor of implementing conservation practices that would substantially reduce CO 2 emissions. [ABSTRACT FROM AUTHOR]

Abstract The green efficiency of water resources is important for industrial cleaner production and sustainable development. Existing studies pay much attention to the economic efficiency of water resource utilisation, ignoring its green efficiency. In order to solve this problem, an index of green total factor water efficiency (GTFWE) that can reflect the economic efficiency and green efficiency of water resources is constructed based on the DEA-SBM model with undesirable output. In addition, GTFWE is comprised of green total factor water management efficiency (GTFWME) and green total factor water environmental efficiency (GTFWEE) using the four-stage DEA model. The empirical results show that GTFWE in China's industry is at a low level, the effect of GTFWEE on GTFWE is generally increasing, and GTFWME is decreasing. However, there are large differences in these trends between regions and provinces in China. The GTFWME of Beijing, Tianjin, and seven other provinces needs improvement, while the GTFWME and GTFWEE of Hebei, Inner Mongolia, and other 15 provinces is low and also need improving. In contrast, both GTFWME and GTFWEE are high in the Shandong and Guangdong provinces. This paper provides a method for assessing GTFWE in China's industry and proposes some important policy implications for promoting the efficiency of China's industrial green total factor water resources. [ABSTRACT FROM AUTHOR]

The increasingly high frequency of heavy air pollution in most regions of China signals the urgent need for the transition to an environmentally friendly production performance by socioeconomic sectors for the sake of people's health and sustainable development. Focusing on CO 2 and major air pollutants, this paper presents a comprehensive environmental efficiency index based on evaluating the environmental efficiency of major socioeconomic sectors, including agriculture, power, industry, residential and transportation, at the province level in China in 2010 based on a slack-based measure DEA model with non-separable bad output and weights determined by the coefficient of variation method. In terms of the environment, 5, 16, 6, 7 and 4 provinces operated along the production frontier for the agricultural, power, industrial, residential and transportation sectors, respectively, in China in 2010, whereas Shanxi, Heilongjiang, Ningxia, Hubei and Yunnan showed lowest efficiency correspondingly. The comprehensive environmental efficiency index varied from 0.3863 to 0.9261 for 30 provinces in China, with a nationwide average of 0.6383 in 2010; Shanghai ranked at the top, and Shanxi was last. Regional disparities in environmental efficiency were identified. A more detailed inefficiency decomposition and benchmarking analysis provided insight for understanding the source of comprehensive environmental inefficiency and, more specifically, the reduction potential for CO 2 and air pollutants. Some specific research and policy implications were uncovered from this work. [ABSTRACT FROM AUTHOR]

This paper mainly investigates how 2008's Beijing Olympic Games affects environmental efficiency of China's cities. First, we evaluate environmental efficiency through metafrontier directional distance function (DDF), and compare environmental efficiency in different region from static and dynamic perspectives. We also analyze the different treatment of before Olympic Games, during Olympic Games, after Olympic Games on different groups. We find that TGR in the east is the highest, which indicates that environmental production technology in the east has relatively less difference than other three regions. During Olympic Games positively affected environmental efficiency in Beijing, which negatively affected on environmental efficiency under metafrontier in neighbor cities. After Olympic Games positively affected environmental efficiency in Beijing and co-host cities, however, which has insignificant effect on environmental efficiency in neighbor cities. We try to propose some policy implication. First, it is import to develop high-end industry and lengthen value chain of China's secondary industry. Furthermore, it is necessary to improve environmental threshold of FDI and attract clean FDI, which can decrease environmental pollution. Last, China will host 2022 Winter Olympic Games. It is important to use more environmental-soundly building material, and increase clean renewable energy public bus, which can promote green Olympic Games. [ABSTRACT FROM AUTHOR]

Improvement of coal consumption efficiency is very important both for China in solving its problems of energy security and environmental pollution and for the world in addressing the issue of greenhouse gas emissions. Using a total-factor framework, this paper employs a data envelopment analysis (DEA) approach to evaluate the coal consumption efficiency of six energy intensive sub-industries in China in 2015. Coal consumption efficiency is factorized into economic efficiency and environmental efficiency, with sulfur dioxide, nitrogen oxide, and industrial smoke, dust and soot emissions treated as undesirable outputs of energy consumptions. The results show the following. (1) Of the six energy intensive sub-industries studied, two exhibit both DEA-effective coal economic efficiency and coal environmental efficiency. Coal economic efficiency is found to be greater than coal environmental efficiency, indicating that the benefits of economic efficiency have masked the negative effects of the environmental impact. China should therefore pay more attention to the clean utilization of coal. (2) Low environmental efficiency mainly resulted from the joint effects of pure technical efficiency and scale efficiency; therefore, enterprises in these industries must engage in management efforts to improve their ability to manage large enterprises. (3) The energy intensive industries characterized by coal environmental efficiency that failed to achieve pure technological effectiveness all exhibited input redundancy or output inadequacy of varying degrees while showing a potential for energy conservation and emissions reductions. [ABSTRACT FROM AUTHOR]

In recent years, economy grows rapidly in China but it also pays a huge cost of destroy of resources and environment, and energy-saving and emission reduction has become a hot topic. This paper aims at calculating the environmental efficiency and environmental total factor productivity (TFP) of Beijing under the constraint of energy-saving and emission reduction to explore the relationship of the city’s economy and environment. We used an improved directional distance function – Biennial Directional Distance Function (BDDF) and Luenberger (L) productivity index which is corresponding to BDDF. This method can decompose the efficiency and productivity according to input and output factors and solve the problem of infeasible solution. The study found that the environmental efficiency of Beijing is different from regions and it takes on a concave distribution from the urban center to the edge of the city. Energy inputs and environmental pollution are the main influence factors of environmental inefficiency. The environmental TFP of the two central regions is higher than the two fringe regions, and through the decomposition results, we learned that the technology progress and the energy-saving emission reduction are the core of productivity growth momentum. From the change trend, the environmental efficiency of Beijing reached a high level in 2011 and followed by a slow decline. Whereas environmental TFP showed a tortuous rise trend which is down to the lowest in 2011–2012 and up to the highest in 2015. Based on our conclusions, we can say that energy-saving and emission reduction work of Beijing has made some good achievements, but with the difficulties increase we should take more reasonable measures according to the actual situation and join together to make the results of energy-saving and emission reduction work more effective. [ABSTRACT FROM AUTHOR]

Haze has seriously threatened the ecological environment and public health, so researching environmental efficiency under haze constraints is significant in managing pollution and evaluating the balance between economic development and environmental health. Based on the panel data of China's 99 cities during 2005–2017, this paper uses α-convergence and β-convergence models to analyze the spatial convergence of environmental efficiency under haze constraints and its drivers in China,specifically in Eastern China, Central China, and Western China.The main results are as follows: (1) The trend of environmental efficiency under haze constraints in these regions evidently follows a dumbbell curve. In recent years, it has been growing slowly in Eastern China, Central China, and Western China, and the environmental efficiency in the Eastern China is the highest, the Central China is the second, and the Western China is the lowest; (2) it demonstrates both α-convergence and β-convergence in Central China, Western China, and Eastern China, and the speed of convergence is the fastest in the Central China, the second in the Western China and the slowest in the Eastern China; there is a "catch-up effect" in cities from less environmentally efficient regions to more efficient regions; and (3) Industrial structure and degree of trade dependence have a significantly negative correlation; characteristics of the region and dependence on foreign investment have significantly positive correlations with the environmental efficiency of Eastern China and Central China; environmental regulations and economic scale limit the improvement of environmental efficiency of Central China and Western China; and technological innovation significantly impacts Eastern China only. Although the paper refers to the specific evidence of China, with haze as a new indicator in the comprehensive evaluation of environmental efficiency can be extended to other developing countries as well as to other pollutants such as land pollution and waste water. The understanding of drivers of environmental efficiency under haze constraints in China provides international policy-makers with valuable reference for formulating effective measures to balance the dilemma between economic development and environmental health. • Haze was brought into the framework of environmental efficiency. • The environmental efficiency in China followed a dumbbell curve. • A "catch-up effect" in less environmentally efficient regions was confirmed. • Industrial structure had a negative correlation with the environmental efficiency [ABSTRACT FROM AUTHOR]

China's economic has got remarkable achievements during the past 30 years, which has brought tremendous pressure on natural resources and serious environmental pollution at the same time. In this paper, we aim to make environmental efficiency analysis of China's regional industry. Data envelopment analysis (DEA) method is incorporated and the slacks-based measure (SBM) model considering undesirable outputs is introduced to measure the environmental efficiency of different regions. Big data theory is introduced in the collection and selection of the input and output data of the regions. Further, we evaluate the environmental efficiencies of China's industry using data from 2008 to 2012. The results show that apart from several developed provinces, the environmental efficiencies of China's industry are generally low. And the environmental efficiencies of the regions did not show any increasing trend through the past 5 years. Additionally, lager differences exist in environmental efficiencies between the regions in China. Finally, we suggest the Chinese government to focus on the low environmental efficiencies and the unbalanced development of its regional industry. [ABSTRACT FROM AUTHOR]

There is great interest in measuring energy efficiency of China's industry using data envelopment analysis (DEA) approaches. This paper proposes a new exponential transformation of undesirable outputs into desirable outputs as part of a DEA approach for calculating environmental efficiency by using all kinds of classic models. Different from the existing transformations, the exponential model should provide a more flexible way to deal with undesirable outputs, allowing the user to adjust the slope and distribution of the transformation function by setting a parameter. A strategy for maximizing the standard variance among the undesirable outputs after transformation is employed in this paper to determine the optimal parameter value for the exponential model. This paper empirically examines the energy performance of sectors in Chinese industry from 2010 to 2014 using the proposed DEA model and the results show that most sectors in Chinese industry have not performed well, especially the sectors concerned with energy extraction. Based on the results of the efficiency evaluation, this paper calculates how can each sector achieve efficiency improvement through energy conservation and emission reduction, and propose specific improvement target values for each sector accordingly. Image 106227 • Alternative approach is constructed to deal with undesirable output in DEA models. • A new transformation is provided to reflect the exponential relationship between desirable and undesirable outputs. • The slope and distribution of data under the new transformation function are controllable. • The new presented approach is applied to measure the performance of 38 industries in China. [ABSTRACT FROM AUTHOR]

As a main method for achieving environmental protection, improvement of environmental efficiency is vitally important for reducing environmental risk and level of ecological scarcity. Thus, quantitative analysis of environmental efficiency is not only an important premise for understanding the situation of regional environmental protection, but also a prerequisite for designing and adjusting relevant policies. In this paper, we treat the undesirable output in an economic activity by a linear monotonic decreasing transformation approach. We employ data envelopment analysis (DEA) technique to evaluate environmental efficiency in 30 provinces of China during the period 2001–2010, and conduct hypothesis tests on these environmental efficiencies. Furthermore, we investigate the horizontal differences of environmental efficiency in six regions of China and the vertical differences among different years. The results show that our empirical tests have a high statistical reliability that provides support for prompting environmental policies in different parts of China. [ABSTRACT FROM AUTHOR]

Improving the express industry's environmental efficiency is of practical significance to green and sustainable economic development. The development of internet may help achieve this goal. However, previous studies have not provided a consistent result about the relationship between internet development and the express industry's environmental efficiency. This paper provides a deeper understanding of this relationship by analyzing the threshold effects from the perspectives of road network density, openness to international trade and competition, and e-commerce level. Based on Chinese provincial data from 2012 to 2017, we first use a range directional data envelopment analysis model to evaluate the express industry environmental efficiency. Then, a threshold model is constructed to analyze the threshold effects in the relationship between internet development and environmental efficiency. The results show that: (1) The impact of internet development on the express industry's environmental efficiency shows a single threshold effect as road network density increases, which indicates that internet development significantly improves that environmental efficiency when the road network density is above a threshold value. (2) The impact of internet development on express industry environmental performance shows a dual-threshold effect as the degree of openness increases. (3) There is also a dual-threshold effect in this relationship as the proportion of e-commerce business transactions increases, but this effect is not significant. Based on these results, suggestions are given for the express industry to improve its environmental efficiency in China. [ABSTRACT FROM AUTHOR]

By-production (BP) technologies, modeled as an intersection of intended production technologies (production efficiency) and nature's residual-generation technologies (environmental efficiency), was applied in this paper to estimate the regional eco-efficiency in China during 2008–2017. This model is firstly formulated by directional-distance-function (DDF) and Färe-Grosskopf-Lovell (FGL), and then modified by bootstrap sensitivity analysis. The empirical results demonstrate that: (i) BP technologies based on the multiple production relations tend to produce lower efficiency scores than conventional model based on a single production relation. Moreover, BP-FGL can be a better choice for the measurement of efficiency index; (ii) The low economic development level is not necessarily associated with low environmental efficiency. Most of the eastern provinces had superior production efficiencies while inferior environmental efficiencies compared with inland provinces; (iii) At the regional level, a greater improvement in environmental efficiency than in production efficiency can be observed, and the gaps on the latter had widened over time among these regions; (iv) The great efficiency gaps between production efficiency and environmental efficiency appeared in the North Coast and Northwest, which are disadvantage to the inter-regional coordinated development. The results indicate that promoting production performance is crucial to improve the eco-efficiency for sustainable development in China. Image 10492 • BP technologies based on multiple production relation is applied. • Most of the eastern provinces have superior production efficiency. • Some western provinces perform well in environmental efficiency. • A greater improvement in environmental efficiency than in production efficiency. • Great efficiency gaps appeared in North Coast and Northwest regions. [ABSTRACT FROM AUTHOR]