Search

An optimized top-down approach was utilized to fabricate vertical GaN-on-GaN nanowire Schottky barrier diodes (NWSBDs) in this letter. The suppressed reverse leakage current and enhanced breakdown voltage (BV) of the vertical GaN NWSBDs are attributed to the reduced electric field at the interface of the Schottky junction achieved through the dielectric reduced surface field technique. As-fabricated NWSBD delivers a low turn-on voltage of 0.80 V, a near-unity ideality factor of 1.04, along with a soft BV of 480 V. The measured soft BV is comparable with the avalanche BV of the p–n diode with a similar net doping concentration in the drift region. [ABSTRACT FROM AUTHOR]

An AlGaN-recess-free, ultrathin-barrier (UTB) AlGaN (<6 nm)/GaN heterostructure is presented for the fabrication and integration of AlGaN/GaN enhancement/depletion-mode (E/D-mode) heterojunction field-effect transistors (HFETs), and metal–insulator-semiconductor HFETs (MIS-HFETs). The 2D electron gas in the access region of the UTB-AlGaN/GaN (MIS)HFETs can effectively be recovered by a low-pressure chemical-vapor-deposited SiNx passivation layer (LPCVD-SiNx), which is capable of introducing about 2.75 × 1013 cm−2 positive fixed charges at the LPCVD-SiNx/(Al)GaN interface. LPCVD-SiNx can also serve as a good gate insulator for D-mode MIS-HFETs. Using the self-terminating etching of LPCVD-SiNx on III-nitride as well as a low-damage remote plasma pretreatment, high uniformity E-mode HFETs and low-hysteresis E-mode MIS-HFETs have been fabricated using the GaN-on-Si platform. E/D-mode MIS-HFET inverters with a large logic swing have also been demonstrated on this platform. The UTB-AlGaN/GaN heterostructure is an attractive technology platform for the on-chip integration of power and RF devices with power-driven circuits for GaN-based smart power integrated circuits. [ABSTRACT FROM AUTHOR]

GaN power transistors are attracting increasing attention for next-generation power switching applications. However, GaN power transistors should not be regarded as a direct replacement for silicon power metal–oxide–semiconductor field-effect transistors, since the unique properties of GaN power transistors require special treatment. In this work we review a unique and critical property of GaN power transistors, the dynamic threshold voltage (Vth). GaN power transistors feature a p-GaN gate structure, while the gate metal contacts the p-GaN layer through a Schottky junction. This unique p-GaN gate structure is distinctively different from the silicon metal–oxide–semiconductor gate structure in that the p-GaN layer is actually a floating region without direct electrical contact to the external electrodes of the device. The floating p-GaN layer enables a charge storage process during the switching operation of a p-GaN gate high-electron-mobility transistor. Through carefully designed experiments, the strong correlation between charge storage and the dynamic Vth shift has been revealed; this also serves as an approach to accurately predict the dynamic Vth during switching operation. The influence of the dynamic Vth on power switching applications is discussed. For example, with a positive dynamic Vth shift, the reverse conduction voltage of a GaN power transistor is significantly increased, adding to the power loss. This positive Vth shift also demands a sufficiently high gate drive voltage to ensure that the GaN power transistor can be fully turned on, which reduces the safety margin for the gate reliability of the device. To design a GaN based power switching circuit, accurate simulation of the device/circuit characteristics is necessary. Circuit simulations that do not consider the dynamic Vth lead to a large deviation from the measurement circuit characteristics. We demonstrate that by incorporating the dynamic Vth into the circuit model this deviation can be effectively eliminated. [ABSTRACT FROM AUTHOR]