Search

Atmospheric carbon dioxide (CO2) is recognized as the most important component of the greenhouse gases, the concentration of which has increased rapidly since the pre-industrial era due to anthropogenic emissions of greenhouse gases (GHG). The accurate monitoring of carbon dioxide is essential to study the global carbon cycle and radiation budget on Earth. The Aerosol and Carbon Detection Lidar (ACDL) instrument onboard the Atmospheric Environmental Monitoring Satellite (AEMS) was successfully launched in April 2022, which allows a new perspective to quantify the global spatial distribution of atmospheric CO2 with high accuracy. In this work, the impact of the Doppler shift on CO2 measurements for an integrated-path differential absorption (IPDA) light detection and ranging (lidar) system was evaluated to meet the weighted column-averaged mixing ratio of carbon dioxide (XCO2) measurement requirements of less than one part per million (ppm). The measurement uncertainties due to the Doppler shift were first evaluated in airborne IPDA observations. The result shows that most of the Doppler shift is in the range of 6–8 MHz, resulting in 0.26-0.39 ppm deviations in the XCO2 results. The deviations between the XCO2 retrievals and in situ measurements decreased to 0.16 ppm after the correction of the Doppler shift from 11:28:29 to 11:28:49 in the flight campaign. In addition, the online Doppler shift accounts for 98% of the deviations between XCO2 retrievals and in situ measurements. Furthermore, the impact of the Doppler shift on ACDL measurements is also assessed. The differences between the XCO2 retrievals with and without Doppler shift are used to quantify measurement uncertainties due to the Doppler effect. The simulations reveal that a pointing misalignment of 0.067 mrad can lead to a mean bias of about 0.30 ppm (0.072%) in the CO2 column. In addition, CO2 measurements are more sensitive to the Doppler shift at high altitudes for IPDA lidar, so the largest differences in the CO2 columns are found on the Qinghai–Tibet Plateau in China. [ABSTRACT FROM AUTHOR]

As the second most predominant greenhouse gas, methane-targeted emission mitigation holds the potential to decelerate the pace of global warming. Satellite remote sensing is an important monitoring tool, and we review developments in the satellite detection of methane. This paper provides an overview of the various types of satellites, including the various instrument parameters, and describes the different types of satellite retrieval algorithms. In addition, the currently popular methane point source quantification method is presented. Based on existing research, we delineate the classification of methane remote sensing satellites into two overarching categories: area flux mappers and point source imagers. Area flux mappers primarily concentrate on the assessment of global or large-scale methane concentrations, with a further subclassification into active remote sensing satellites (e.g., MERLIN) and passive remote sensing satellites (e.g., TROPOMI, GOSAT), contingent upon the remote sensing methodology employed. Such satellites are mainly based on physical models and the carbon dioxide proxy method for the retrieval of methane. Point source imagers, in contrast, can detect methane point source plumes using their ultra-high spatial resolution. Subcategories within this classification include multispectral imagers (e.g., Sentinel-2, Landsat-8) and hyperspectral imagers (e.g., PRISMA, GF-5), contingent upon their spectral resolution disparities. Area flux mappers are mostly distinguished by their use of physical algorithms, while point source imagers are dominated by data-driven methods. Furthermore, methane plume emissions can be accurately quantified through the utilization of an integrated mass enhancement model. Finally, a prediction of the future trajectory of methane remote sensing satellites is presented, in consideration of the current landscape. This paper aims to provide basic theoretical support for subsequent scientific research. [ABSTRACT FROM AUTHOR]

The Fourier Transform Spectrometer (FTS) at the Beijing Satellite Meteorological Ground Station observed XCO2 (the dry carbon dioxide column) from 2 March 2016 to 4 December 2018. The validation results of ground-based XCO2, as well as GOSAT, OCO-2, and TanSat XCO2, show that the best temporal matching setting for ground-based XCO2 and satellite XCO2 is ±1 h, and the best spatial matching setting for GOSAT is 0.5° × 0.5°. Consistent with OCO-2, the best spatial matching setting of TanSat is 5° × 5° or 6° × 6°. Among GOSAT, OCO-2, and TanSat, the satellite observation validation characteristics near 5° × 5° from the ground-based station are obviously different from other spatial matching grids, which may be due to the different observation characteristics of satellites near 5° × 5°. To study the influence of local CO2 sources on the characteristics of satellite observation validation, we classified the daily XCO2 observation sequence into concentrated, dispersive, increasing, and decreasing types, respectively, and then validated the satellite observations. The results showed that the concentrated and decreasing sub-datasets have better validation performance. Our results suggest that it is best to use concentrated and decreasing sub-datasets when using the Beijing Satellite Meteorological Ground Station XCO2 for satellite validation. The temporal matching setting should be ±1 h, and the spatial matching setting should consider the satellites observation characteristics of 5° × 5° distance from the ground-based station. [ABSTRACT FROM AUTHOR]