Search

A series of earthquakes, the highest of magnitude $$\text{ M }_\mathrm{w}$$ 5.9, hit a portion of the Po Valley in Northern Italy, which was only recently classified as seismic. The paper reports the findings and the lessons learnt from a preliminary field survey which was conducted immediately after the second event. As a result of the economic attitude of the affected area, and possibly of the characteristics of the event, an unprecedented number of industrial precast buildings were affected, resulting into most of the casualties as well as in large economic losses. Whereas most of the damaged and collapsed buildings were designed for gravity loads only, evidence of poor behavior of some precast buildings designed according to seismic provisions were discovered. The paper provides a description of the performance of precast buildings, highlighting the deficiencies that led to their poor behavior as well as some preliminary recommendations. [ABSTRACT FROM AUTHOR]

The earthquake sequence started on May $$20$$ th 2012 in Emilia (Italy) affected a region where masonry constructions represent a large part of the existing building stock and the construction of new modern masonry buildings is a common practice. The paper is focused on the performance of common architectural configurations, typical for residential or business use. The large majority of old masonry buildings is made of fired clay bricks. The seismic performance of these buildings is particularly interesting since major past earthquakes in Italy affected areas with mainly stone masonry structures. Apart from examples showing systematic or peculiar structural deficiencies governing the vulnerability of several buildings, the overall seismic performance of these structures to repeated shaking, with PGA as large as 0.25-0.3 g was rather good, despite the major part of them were only conceived for carrying vertical loads. In fact, seismic design is mandatory in the area only since 2003. Modern low-rise masonry buildings erected after this date and incorporating seismic design and proper detailing resulted in most cases practically undamaged. The examples reported in the paper allow an evaluation of the superior performance of seismically designed modern masonry buildings in comparison to older ones. [ABSTRACT FROM AUTHOR]

This paper outlines the response of the healthcare system in the area mainly affected by the 2012 Emilia earthquake by drawing on specific surveys and information from local health authorities. Some hospitals were evacuated after the M $$_\mathrm{l}$$ = 5.8 May 20 seismic event due to damage to non structural components and minor structural damage. A short description of the damage suffered and characteristics of the healthcare system as a whole is offered initially, followed by a detailed description of the effects which took place at the Santa Maria Bianca hospital of Mirandola. The focus has been on damage to non structural elements and content, whose integrity is of primary importance for healthcare structures performance during and after a seismic event. Some instruments for the acquisition of accelerometric data were installed after the May 20 event both outside and inside a building which is part of the hospital complex. The seismic behavior of this building has also been analysed by means of a purposely made finite element model and on the basis of the recorded data. The contribution of undamaged and damaged masonry infills to the global seismic response has also been estimated thus providing some hints on the observed building performance. [ABSTRACT FROM AUTHOR]

Vernacular buildings are a relevant part of the building stock affected by the Emilia, 2012, earthquakes and they contribute to shape the rural landscape of the Po valley. Unfortunately, due to overall layout, constructive details and poor maintenance, they have shown a very poor seismic performance. Because most of these buildings are lightly used or abandoned, the risk that they will be demolished is rather high; this could be the most long-lasting outcome of the seismic sequence, deeply affecting the traditional landscape of this portion of the Po valley. In this paper a brief description of the architectural features of these buildings is given and their typical seismic performances are analysed. Because damage is usually related to local-collapse mechanisms, rocking spectra are computed for the near field accelerograms and they are compared with observed behaviours. Finally, suggestions are given to improve the earthquake response of these structures, with the aim of preserving important testimonies of the civilisation of the area. [ABSTRACT FROM AUTHOR]