Search

In order to cope with the problems of energy shortage and environmental pollution, carbon emissions need to be reduced and so the structure of the power grid is constantly being optimized. Traditional centralized power networks are not as capable of controlling and distributing non-renewable energy as distributed power grids. Therefore, the optimal dispatch of microgrids faces increasing challenges. This paper proposes a multi-strategy fusion slime mould algorithm (MFSMA) to tackle the microgrid optimal dispatching problem. Traditional swarm intelligence algorithms suffer from slow convergence, low efficiency, and the risk of falling into local optima. The MFSMA employs reverse learning to enlarge the search space and avoid local optima to overcome these challenges. Furthermore, adaptive parameters ensure a thorough search during the algorithm iterations. The focus is on exploring the solution space in the early stages of the algorithm, while convergence is accelerated during the later stages to ensure efficiency and accuracy. The salp swarm algorithm's search mode is also incorporated to expedite convergence. MFSMA and other algorithms are compared on the benchmark functions, and the test showed that the effect of MFSMA is better. Simulation results demonstrate the superior performance of the MFSMA for function optimization, particularly in solving the 24 h microgrid optimal scheduling problem. This problem considers multiple energy sources such as wind turbines, photovoltaics, and energy storage. A microgrid model based on the MFSMA is established in this paper. Simulation of the proposed algorithm reveals its ability to enhance energy utilization efficiency, reduce total network costs, and minimize environmental pollution. The contributions of this paper are as follows: (1) A comprehensive microgrid dispatch model is proposed. (2) Environmental costs, operation and maintenance costs are taken into consideration. (3) Two modes of grid-tied operation and island operation are considered. (4) This paper uses a multi-strategy optimized slime mould algorithm to optimize scheduling, and the algorithm has excellent results. [ABSTRACT FROM AUTHOR]

Inspired by insects in nature, an increasing number of soft robots have been proposed to mimic their locomotion patterns. As a wireless actuation method, the magnetic actuation technique has been widely applied to drive soft magnetic robots for diverse applications. Although recent works on soft materials have stimulated the development of soft robots, it is challenging to achieve the efficient movement of soft robots for in vivo biomedical application. Inspired by centipede locomotion, a soft octopodal robot is designed in this paper. The robot is fabricated by mixing magnetic particles with silicone polymers, which is then magnetized by a specific magnetic field. The prototypes can be actuated by an external magnetic field (5–8 mT) produced by custom-made electromagnetic coils. Experimental results show that the soft robot can move at a high speed in the range of 0.536–1.604 mm/s on different surfaces, including paper, wood, and PMMA. This indicates that the soft robot can achieve comparable speeds to other robots, while being driven by a lower magnitude, resulting in energy savings. Furthermore, it achieves a high speed of 0.823 mm/s on the surface of a pig colon. The fine capabilities of the soft robot in terms of crossing uneven biological surfaces and carrying external loads are demonstrated. The results indicate that the reported soft robot exhibits promising applications in the biomedical field. [ABSTRACT FROM AUTHOR]

Energy constraint has become the major challenge for designing wireless sensor networks. Network lifetime is considered as the most substantial metric in these networks. Routing technique is one of the best choices for maintaining network lifetime. This paper demonstrates implementation of new methodology of routing in WSN using firefly swarm intelligence. Energy consumption is the dominant issue in wireless sensor networks routing. For network cutoff avoidance while maximize net lifetime energy exhaustion must be balanced. Balancing energy consumption is the key feature for rising nets lifetime of WSNs. This routing technique involves determination of optimal route from node toward sink to make energy exhaustion balance in network and in the same time maximize network throughput and lifetime. The proposed technique show that it is better than other some routing techniques like Dijkstra routing, Fuzzy routing, and ant colony (ACO) routing technique. Results demonstrate that the proposed routing technique has beat the three routing techniques in throughput and extend net lifetime. [ABSTRACT FROM AUTHOR]

In order to improve the autonomy and intelligence of group animation behavior, this paper proposes a particle swarm optimization algorithm for automatic control of group animation behavior. After the user inputs the group animation behavior construction target, the individual path is planned according to the fixed behavior rules, and the particle swarm optimization algorithm and the improved artificial fish swarm optimization algorithm are used to select the optimal action for the individual in the group animation according to the top-down control process. The experimental results show that after the PSO converges to the global optimal solution, the evolution times of the PSO converge to the global optimal solution again when the surrounding environment changes 10 times. The population diversity of particle swarm optimization algorithm is obviously better than those of the other two algorithms in the process of automatically controlling the movement of individuals to the circle and to the stand in the crowd animation. Compared with the original algorithm AFSA, the improved artificial fish swarm algorithm proposed in this paper is easier to obtain the global optimal value, and the optimization speed is also improved. In conclusion, the example analysis verifies that the algorithm can effectively realize the automatic control of group animation behavior and has high convergence speed and high autonomy. [ABSTRACT FROM AUTHOR]

This paper proposes a novel multi-hybrid algorithm named DHPN, using the best-known properties of dwarf mongoose algorithm (DMA), honey badger algorithm (HBA), prairie dog optimizer (PDO), cuckoo search (CS), grey wolf optimizer (GWO) and naked mole rat algorithm (NMRA). It follows an iterative division for extensive exploration and incorporates major parametric enhancements for improved exploitation operation. To counter the local optima problems, a stagnation phase using CS and GWO is added. Six new inertia weight operators have been analyzed to adapt algorithmic parameters, and the best combination of these parameters has been found. An analysis of the suitability of DHPN towards population variations and higher dimensions has been performed. For performance evaluation, the CEC 2005 and CEC 2019 benchmark data sets have been used. A comparison has been performed with differential evolution with active archive (JADE), self-adaptive DE (SaDE), success history based DE (SHADE), LSHADE-SPACMA, extended GWO (GWO-E), jDE100, and others. The DHPN algorithm is also used to solve the image fusion problem for four fusion quality metrics, namely, edge-based similarity index ( Q A B / F ), sum of correlation difference (SCD), structural similarity index measure (SSIM), and artifact measure ( N A B / F ). The average Q A B / F = 0.765508 , S C D = 1.63185 , S S I M = 0.726317 , and N A B / F = 0.006617 shows the best combination of results obtained by DHPN with respect to the existing algorithms such as DCH, CBF, GTF, JSR and others. Experimental and statistical Wilcoxon's and Friedman's tests show that the proposed DHPN algorithm performs significantly better in comparison to the other algorithms under test. [ABSTRACT FROM AUTHOR]

Optimization of scheduling problems that involve single or multiple machines with a multimodal objective function and linear or non-linear constraints are generally NP-Hard. The Artificial Bee Colony (ABC) algorithm is a metaheuristic proposed about eighteen years ago and has gained popularity in the swarm intelligence-based evolutionary computation approaches. Various scheduling requirements in diverse domains viz. Electric Vehicle charging, Operating Room, Nurse, Automatic Guided Vehicle (AGV), production, manufacturing, hydrothermal, Printed Circuit Board (PCB), and call centre scheduling are studied. The NP-Hard nature of these scheduling problems render exact methods incompetent for large problem instances thus requiring meta-heuristics such as ABC to produce feasible solutions in a reasonable computation time. The adaptation of ABC in these domains and the outcomes and performance of ABC are highlighted. Based on the case studies, it is found that the requirements of scheduling problems that would benefit from ABC are those that have a planning horizon requiring a near-optimal solution in a reasonably fast time when run on minimal computing capacity. Future works that would merit the application and enhancement of existing ABC techniques are proposed. The case studies presented in this paper motivate R&D Engineers and young researchers to apply ABC techniques of optimization and scheduling in different research topics for achieving energy and cost efficiency. [ABSTRACT FROM AUTHOR]

This paper presents a concept of a routing algorithm for a network of sensors monitoring the condition of machinery and equipment operating in areas at risk of methane and/or coal dust explosion. It was assumed that the proposed algorithm would find application in sensor networks monitoring, among other things, oil pressure in powered roof supports and the position of powered roof support elements. The results of a literature analysis were presented, which included the simulation of sensor network routing algorithms, including, among others, reactive algorithms, proactive algorithms and algorithms based on so-called swarm intelligence (SI). As a result of the analyses, several algorithms were selected and implemented in a prototype sensor network. The characteristics of each of these algorithms are described. The article includes a description of the commissioning work of the network, which consisted of between 3 and 30 nodes. An analysis of the collected measurement data obtained for each criterion of the performance evaluation of the routing algorithms is presented. [ABSTRACT FROM AUTHOR]

This research introduces innovative approaches to enhance intrusion detection systems (IDSs) by addressing critical challenges in existing methods. Various machine-learning techniques, including nature-inspired metaheuristics, Bayesian algorithms, and swarm intelligence, have been proposed in the past for attribute selection and IDS performance improvement. However, these methods have often fallen short in terms of detection accuracy, detection rate, precision, and F-score. To tackle these issues, the paper presents a novel hybrid feature selection approach combining the Bat metaheuristic algorithm with the Residue Number System (RNS). Initially, the Bat algorithm is utilized to partition training data and eliminate irrelevant attributes. Recognizing the Bat algorithm's slower training and testing times, RNS is incorporated to enhance processing speed. Additionally, principal component analysis (PCA) is employed for feature extraction. In a second phase, RNS is excluded for feature selection, allowing the Bat algorithm to perform this task while PCA handles feature extraction. Subsequently, classification is conducted using naive bayes, and k-Nearest Neighbors. Experimental results demonstrate the remarkable effectiveness of combining RNS with the Bat algorithm, achieving outstanding detection rates, accuracy, and F-scores. Notably, the fusion approach doubles processing speed. The findings are further validated through benchmarking against existing intrusion detection methods, establishing their competitiveness. [ABSTRACT FROM AUTHOR]

Inspired by the migration and reproduction of species in nature to explore suitable habitats, this paper proposed a new swarm intelligence algorithm called the Migration and Reproduction Algorithm (MARA). This new algorithm discusses how to transform the behavior of an organism looking for a suitable habitat into a mathematical model, which can solve optimization problems. MARA has some common features with other optimization methods such as particle swarm optimization (PSO) and the fireworks algorithm (FWA), which means MARA can also solve the optimization problems that PSO and FWA are used to, namely, high-dimensional optimization problems. MARA also has some unique features among biology-based optimization methods. In this paper, we articulated the structure of MARA by correlating it with natural biogeography; then, we demonstrated the performance of MARA on sets of 12 benchmark functions. In the end, we applied it to optimize a practical problem of power dispatching in a multi-microgrid system that proved it has certain value in practical applications. [ABSTRACT FROM AUTHOR]

The Ultra-Wideband (UWB) indoor positioning method is widely used in areas where no satellite signals are available. However, during the measurement process of UWB, the collected data contain random errors. To alleviate the effect of random errors on positioning accuracy, an improved adaptive sparrow search algorithm (IASSA) based on the sparrow search algorithm (SSA) is proposed in this paper by introducing three strategies, namely, the two-step weighted least squares algorithm, adaptive adjustment of search boundary, and producer–scrounger quantity adaptive adjustment. The simulation and field test results indicate that the IASSA algorithm achieves significantly higher localization accuracy than previous methods. Meanwhile, the IASSA algorithm requires fewer iterations, which overcomes the problem of the long computation time of the swarm intelligence optimization algorithm. Therefore, the IASSA algorithm has advantages in indoor positioning accuracy and robustness performance. [ABSTRACT FROM AUTHOR]

Swarm Intelligence (SI) algorithms are frequently applied to tackle complex optimization problems. SI is especially used when good solutions are requested for NP hard problems within a reasonable response time. And when such problems possess a very high dimensionality, a dynamic nature, or present intrinsic complex intertwined independent variables, computational costs for SI algorithms may still be too high. Therefore, new approaches and hardware support are needed to speed up processing. Nowadays, with the popularization of GPU and multi-core processing, parallel versions of SI algorithms can provide the required performance on those though problems. This paper aims to describe the state of the art of such approaches, to summarize the key points addressed, and also to identify the research gaps that could be addressed better. The scope of this review considers recent papers mainly focusing on parallel implementations of the most frequently used SI algorithms. The use of nested parallelism is of particular interest, since one level of parallelism is often not sufficient to exploit the computational power of contemporary parallel hardware. The sources were main scientific databases and filtered accordingly to the set requirements of this literature review. [ABSTRACT FROM AUTHOR]

We propose an adaptive fractional multi-scale optimization optical flow algorithm, which for the first time improves the over-smoothing of optical flow estimation under the total variation model from the perspective of global feature and local texture balance, and solves the problem that the convergence of fractional optical flow algorithms depends on the order parameter. Specifically, a fractional-order discrete L1-regularization Total Variational Optical Flow model is constructed. On this basis, the Ant Lion algorithm is innovatively used to realize the iterative calculation of the optical flow equation, and the fractional order is dynamically adjusted to obtain an adaptive optimization algorithm with strong search accuracy and high efficiency. In this paper, the flexibility of optical flow estimation in weak gradient texture scenes is increased, and the optical flow extraction rate of target features at multiple scales is greatly improved. We show excellent recognition performance and stability under the MPI_Sintel and Middlebury benchmarks. [ABSTRACT FROM AUTHOR]

Chinese traditional culture is a typical "moral culture," and traditional morality is the core and essence of culture. However, in recent years, the phenomenon of following the trend of rural construction has been particularly serious, and many villages have lost their original features. To solve the above problems, the genetic algorithm can be used to further explore the traditional culture of urbanization construction. A genetic algorithm is a natural evolutionary process that imitates natural selection and genetic operation in nature to obtain optimal solution, in which genetic operation mainly includes the processes of gene replication, crossover, and mutation. This paper studies the traditional culture of urbanization construction based on the genetic algorithm under the concept of environmental protection. Among the accuracy of urban construction land expansion, in 2018, the accuracy of ant colony algorithm, data mining algorithm, and particle swarm optimization algorithm is 58%, 51.8%, and 56.7%, respectively. The accuracy of this genetic algorithm is as high as 58.8%. It can be seen that the genetic algorithm in this paper has the highest accuracy in the expansion of urban construction land. Therefore, in the process of large-scale urbanization based on the genetic algorithm, we should pay attention to not being separated from traditional culture, not letting farmers lose their regional culture, local culture, and grassroots culture, and protecting the cultural-ecological environment on which these cultures depend. [ABSTRACT FROM AUTHOR]

In existing meta-heuristic algorithms, population initialization forms a huge part towards problem optimization. These calculations can impact variety and combination to locate a productive ideal arrangement. Especially, for perceiving the significance of variety and intermingling, different specialists have attempted to improve the presentation of meta-heuristic algorithms. Particle Swarm Optimization (PSO) algorithm is a populace-based, shrewd stochastic inquiry strategy that is motivated by the inherent honey bee swarm food search mechanism. Population initialization is an indispensable factor in the PSO algorithm. To improve the variety and combination factors, rather than applying the irregular circulation for the introduction of the populace, semi-arbitrary successions are more helpful. This examination presents a thorough overview of the different PSO initialization approaches which are dependent on semi-arbitrary successions systems. In this precise review, the best in class in the populace instatement is uncovered. The procedures are classified by utilizing a theoretical model that parts the cycle of populace introduction into two phases: that is, right now expressly or certainly utilized for reinstatement in every single present approach. The deliberate investigation unveils the potential examination zones of populace introduction and, furthermore, research holes, despite the fact that the fundamental center is to give the headings to future upgrade and advancement around there. This paper gives a deliberate study identified with this calculated model for the cutting edge of exploration, which is talked about in the predefined writing to date. The study is envisioned to be useful in examining the PSO algorithm in detail for the specialist. Likewise, the paper finds the proficiency of numerous quasi-random sequences (QRS) based on initialization approaches by looking at their exhibition analyzed for sixteen notable benchmark test problems. [ABSTRACT FROM AUTHOR]

Optimizing the heliostat field aiming strategy is crucial for maximizing thermal power production in solar power tower (SPT) plants while adhering to operational constraints. Although existing approaches can yield highly optimal solutions, their considerable computational cost makes them unsuitable for real-time optimization in large-scale scenes. This study introduces an efficient, intelligent, real-time optimization method based on a meta-heuristic algorithm to effectively and reliably manage SPT plant operations under varying solar conditions, such as cloud shadowing variations. To minimize redundant calculations, the real-time optimization problem is framed in a way that captures the operational continuity of the heliostat, which can be utilized to streamline the solution process. The proposed method is tested in a simulation environment that includes a heliostat field, cylindrical receiver, and cloud movement model. The results demonstrate that the algorithm presented in this paper offers higher intercept efficiency, improved robustness, and reduced optimization time in more complex scenes. [ABSTRACT FROM AUTHOR]

The slime mould algorithm (SMA) is a new swarm intelligence algorithm inspired by the oscillatory behavior of slime moulds during foraging. Numerous researchers have widely applied the SMA and its variants in various domains in the field and proved its value by conducting various literatures. In this paper, a comprehensive review of the SMA is introduced, which is based on 130 articles obtained from Google Scholar between 2022 and 2023. In this study, firstly, the SMA theory is described. Secondly, the improved SMA variants are provided and categorized according to the approach used to apply them. Finally, we also discuss the main applications domains of the SMA, such as engineering optimization, energy optimization, machine learning, network, scheduling optimization, and image segmentation. This review presents some research suggestions for researchers interested in this algorithm, such as conducting additional research on multi-objective and discrete SMAs and extending this to neural networks and extreme learning machining. [ABSTRACT FROM AUTHOR]

In today's automation control systems, the PID controller, as a core technology, is widely used to maintain the system output near the set value. However, in some complex control environments, such as the application of ball screw-driven rotating motors, traditional PID parameter adjustment methods may not meet the requirements of high precision, high performance, and fast response time of the system, making it difficult to ensure the stability and production efficiency of the mechanical system. Therefore, this paper proposes a cuckoo search optimisation coupled with an improved grey wolf optimisation (CSO_IGWO) algorithm to tune PID controller parameters, aiming at resolving the problems of the traditional grey wolf optimisation (GWO) algorithm, such as slow optimisation speed, weak exploitation ability, and ease of falling into a locally optimal solution. First, the tent chaotic mapping method is used to initialise the population instead of using random initialization to enrich the diversity of individuals in the population. Second, the value of the control parameter is adjusted by the nonlinear decline method to balance the exploration and development capacity of the population. Finally, inspired by the cuckoo search optimisation (CSO) algorithm, the Levy flight strategy is introduced to update the position equation so that grey wolf individuals are enabled to make a big jump to expand the search area and not easily fall into local optimisation. To verify the effectiveness of the algorithm, this study first verifies the superiority of the improved algorithm with eight benchmark test functions. Then, comparing this method with the other two improved grey wolf algorithms, it can be seen that this method increases the average and standard deviation by an order of magnitude and effectively improves the global optimal search ability and convergence speed. Finally, in the experimental section, three parameter tuning methods were compared from four aspects: overshoot, steady-state time, rise time, and steady-state error, using the ball screw motor as the control object. In terms of overall dynamic performance, the method proposed in this article is superior to the other three parameter tuning methods. [ABSTRACT FROM AUTHOR]

This paper presents a method for unsupervised classification of entities by a group of agents with unknown domains and levels of expertise. In contrast to the existing methods based on majority voting ("wisdom of the crowd") and their extensions by expectation-maximization procedures, the suggested method first determines the levels of the agents' expertise and then weights their opinions by their expertise level. In particular, we assume that agents will have relatively closer classifications in their field of expertise. Therefore, the expert agents are recognized by using a weighted Hamming distance between their classifications, and then the final classification of the group is determined from the agents' classifications by expectation-maximization techniques, with preference to the recognized experts. The algorithm was verified and tested on simulated and real-world datasets and benchmarked against known existing algorithms. We show that such a method reduces incorrect classifications and effectively solves the problem of unsupervised collaborative classification under uncertainty, while outperforming other known methods. [ABSTRACT FROM AUTHOR]

This paper provides a real application of a popular swarm-intelligence optimisation method. The aim is to analyse the efficiency of various settings of the marine predator algorithm (MPA). Four crucial numerical parameters of the MPA are statistically analysed to propose the most efficient setting for solving engineering problems. Besides population size, particle velocity parameter P, Lévy flight parameter β , and fish aggregating device (FAD) probabilities are studied. Finally, 193 various settings, including fixed values and dynamic changes of the MPA parameters, are experimentally compared when solving 13 engineering problems. Standard statistical approaches are employed to highlight significant differences in various MPA settings. The setting of two MPA parameters (P, FADs) significantly influences MPA performance. Three newly proposed MPA settings outperform the original variant significantly. The best results provide the MPA variant with the dynamic linear change of P from 0.5 to 0. These parameters influence the velocity of prey and predator individuals in all three stages of the MPA search process. Decreasing the value of P showed that decreasing the velocity of individuals during the search provides good performance. Further, lower efficiency of the MPA with higher FAD values was detected. It means that more occasional use of fish aggregating devices (FADs) can increase the solvability of engineering problems. Regarding population size, lower values ( N = 10 ) provided significantly better results compared with the higher values ( N = 500 ). [ABSTRACT FROM AUTHOR]

Bat algorithm is an effective swarm intelligence optimization algorithm which is widely used to solve continuous optimization problems. But it still has some limitations in search process and can't solve discrete optimization problems directly. Therefore, this paper introduces an unordered pair and proposes an unordered pair bat algorithm (UPBA) to make it more suitable for solving symmetric discrete traveling salesman problems. To verify the effectiveness of this method, the algorithm has been tested on 23 symmetric benchmarks and compared its performance with other algorithms. The results have shown that the proposed UPBA outperforms all the other alternatives significantly in most cases. [ABSTRACT FROM AUTHOR]

Accurate localization of partial discharge in GIS equipment remains a key focus of daily maintenance for substations, which can be achieved through advanced detection and location techniques, as well as regular maintenance and testing of the equipment. However, there is currently an issue with low accuracy in the localization algorithm. Aiming at the problems of low precision and local optimization of the swarm intelligence algorithm in partial discharge localization system of GIS equipment, this paper proposes a 3D localization algorithm based on a time difference of arrival (TDOA) model of the improved artificial fish swarm algorithm (IAFSA). By introducing the investigation behaviour of the artificial bee colony(ABC) algorithm into the artificial fish swarms algorithm (AFSA), this algorithm is more efficient to jump out of the local extremum, enhance the optimization performance, improve the global search ability and overcome the premature convergence. Furthermore, more precise positioning can be achieved with dynamic parameters. The results of the testing function show that IAFSA is significantly superior to AFSA and particle swarm optimization (PSO) in terms of positioning accuracy and stability. When applied to partial discharge localization experiments, the maximum relative positioning error is less than 2.5%. This validates that the proposed method in this paper can achieve high-precision partial discharge localization, has good engineering application value, and provides strong support for the safe operation of GIS equipment. [ABSTRACT FROM AUTHOR]

Swarm intelligence algorithms are metaheuristics inspired by the collective behavior of species such as birds, fish, bees, and ants. They are used in many optimization problems due to their simplicity, flexibility, and scalability. These algorithms get the desired convergence during the search by balancing the exploration and exploitation processes. These metaheuristics have applications in various domains such as global optimization, bioinformatics, power engineering, networking, machine learning, image processing, and environmental applications. This paper presents a systematic literature review (SLR) on applications of four swarm intelligence algorithms i.e., grey wolf optimization (GWO), whale optimization algorithms (WOA), Harris hawks optimizer (HHO), and moth-flame optimizer (MFO) in the field of software engineering. It presents an in-depth study of these metaheuristics' adoption in the field of software engineering. This SLR is mainly comprised of three phases such as planning, conducting, and reporting. This study covers all related studies published from 2014 up to 2022. The study shows that applications of the selected metaheuristics have been utilized in various fields of software engineering especially software testing, software defect prediction, and software reliability. The study also points out some of the areas where applications of these swarm intelligence algorithms can be utilized. This study may act as a guideline for researchers in improving the current state-of-the-art on generally adopting these metaheuristics in software engineering. [ABSTRACT FROM AUTHOR]

Recent advancements in computer science include some optimization models that have been developed and used in real applications. Some metaheuristic search/optimization algorithms have been tested to obtain optimal solutions to speed controller applications in self-driving cars. Some metaheuristic algorithms are based on social behaviour, resulting in several search models, functions, and parameters, and thus algorithm-specific strengths and weaknesses. The present paper proposes a fitness function on the basis of the mathematical description of proportional integrative derivate controllers showing that mean square error is not always the best measure when looking for a solution to the problem. The fitness developed in this paper contains features and equations from the mathematical background of proportional integrative derivative controllers to calculate the best performance of the system. Such results are applied to quantitatively evaluate the performance of twenty-one optimization algorithms. Furthermore, improved versions of the fitness function are considered, in order to investigate which aspects are enhanced by applying the optimization algorithms. Results show that the right fitness function is a key point to get a good performance, regardless of the chosen algorithm. The aim of this paper is to present a novel objective function to carry out optimizations of the gains of a PID controller, using several computational intelligence techniques to perform the optimizations. The result of these optimizations will demonstrate the improved efficiency of the selected control schema. [ABSTRACT FROM AUTHOR]

Copyright of Baghdad Science Journal is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper applies the innovative idea of DLCI to PV array reconfiguration under various PSCs to capture the maximum output power of a PV generation system. DLCI is a hybrid algorithm that integrates multiple meta-heuristic algorithms. Through the competition and cooperation of the search mechanisms of different metaheuristic algorithms, the local exploration and global development of the algorithm can be effectively improved to avoid power mismatch of the PV system caused by the algorithm falling into a local optimum. A series of discrete operations are performed on DLCI to solve the discrete optimization problem of PV array reconfiguration. Two structures (DLCI-I and DLCI-II) are designed to verify the effect of increasing the number of sub-optimizers on the optimized performance of DLCI by simulation based on 10 cases of PSCs. The simulation shows that the increase of the number of sub-optimizers only gives a relatively small improvement on the DLCI optimization performance. DLCI has a significant effect on the reduction in the number of power peaks caused by PSC. The PV array-based reconstruction system of DLCI-II is reduced by 4.05%, 1.88%, 1.68%, 0.99% and 3.39%, when compared to the secondary optimization algorithms. [ABSTRACT FROM AUTHOR]

With the development of the drying rack system, users with limited time tend to use the fully functional drying rack system to realize various intelligent control functions. However, the existing control methods for drying rack system has some defects such as, low intelligence and system delay, which are unsuitable for most users. In this paper, an efficient intelligent control algorithm based on the back‐propagation (BP) neural network is proposed. In this system, STM32F103 is first utilized as the central controller and multiple sensors are used to collect environmental information. Then, the remote control, voice keywords, and buttons can be used to achieve intelligent control. Subsequently, a motor drive intelligence control algorithm based on the BP neural network (MCBP) is proposed to improve the accuracy of the intelligent control. Next, an Application (APP) that can display environmental data such as wind speed, temperature, and humidity is developed. The APP can realize various intelligent control functions such as lifting, panning, rotating, and harvesting. Finally, MCBP is compared with normal control and programmable logic controller control. The accuracy of the MCBP is higher than other two control methods. The final extensive experiments confirm the accuracy and efficiency of the proposed intelligent control algorithm. [ABSTRACT FROM AUTHOR]

In the past decades, surrogate-assisted evolutionary algorithms (SAEAs) have become one of the most popular methods to solve expensive multi-objective optimization problems (EMOPs). However, most existing methods focus on low-dimensional EMOPs because a large number of training samples are required to build accurate surrogate models, which is unrealistic for high-dimensional EMOPs. Therefore, this paper develops a two-stage dominance-based surrogate-assisted evolution algorithm (TSDEA) for high-dimensional EMOPs which utilizes the RBF model to approximate each objective function. First, a two-stage selection strategy is applied to select individuals for re-evaluation. Then considering the training time of the model, proposing a novel archive updating strategy to limit the number of individuals for updating. Experimental results show that the proposed algorithm has promising performance and computational efficiency compared to the state-of-the-art five SAEAs. [ABSTRACT FROM AUTHOR]

Metaheuristic optimization algorithms play a crucial role in optimization problems. However, the traditional identification methods have the following problems: (1) difficulties in nonlinear data processing; (2) high error rates caused by local stagnation; and (3) low classification rates resulting from premature convergence. This paper proposed a variant based on the gray wolf optimization algorithm (GWO) with chaotic disturbance, candidate migration, and attacking mechanisms, naming it the enhanced gray wolf optimizer (EGWO), to solve the problem of premature convergence and local stagnation. The performance of the EGWO was tested on IEEE CEC 2014 benchmark functions, and the results of the EGWO were compared with the performance of three GWO variants, five traditional and popular algorithms, and six recent algorithms. In addition, EGWO optimized the weights and biases of a multi-layer perceptron (MLP) and proposed an EGWO-MLP disease identification model; the model was tested on IEEE CEC 2014 benchmark functions, and EGWO-MLP was verified by UCI dataset including Tic-Tac-Toe, Heart, XOR, and Balloon datasets. The experimental results demonstrate that the proposed EGWO-MLP model can effectively avoid local optimization problems and premature convergence and provide a quasi-optimal solution for the optimization problem. [ABSTRACT FROM AUTHOR]

In recent years, the sine cosine algorithm (SCA) has become one of the popular swarm intelligence algorithms due to its simple and convenient structure. However,the standard SCA tends to fall into the local optimum when solving complex multimodal tasks, leading to unsatisfactory results. Therefore, this study presents the SCA with communication and quality enhancement, called CCEQSCA. The proposed algorithm includes two enhancement strategies: the communication and collaboration strategy (CC) and the quality enhancement strategy (EQ). In the proposed algorithm, CC strengthens the connection of SCA populations by guiding the search agents closer to the range of optimal solutions. EQ improves the quality of candidate solutions to enhance the exploitation of the algorithm. Furthermore, EQ can explore potential candidate solutions in other scopes, thus strengthening the ability of the algorithm to prevent trapping in the local optimum. To verify the capability of CCEQSCA, 30 functions from the IEEE CEC2017 are analyzed. The proposed algorithm is compared with 5 advanced original algorithms and 10 advanced variants. The outcomes indicate that it is dominant over other comparison algorithms in global optimization tasks. The work in this paper is also utilized to tackle three typical engineering design problems with excellent optimization capabilities. It has been experimentally demonstrated that CCEQSCA works as an effective tool to tackle real issues with constraints and complex search space. [ABSTRACT FROM AUTHOR]

This paper provides an in-depth study and analysis of a distributed allocation algorithm for collaborative resources for cloud-edge-vehicle-based Telematics. The approach starts from the emerging application of urban environmental monitoring based on vehicular networking, with an integrated design of data sensing detection and transmission, and collaborative monitoring of vehicle swarm intelligence based on urban air quality collection to avoid redundancy of information and communication overload. A hybrid routing method with minimal delay for reliable data transmission is proposed. The power adjustment algorithm divides the channel into 3 states. When the CBR is less than 0.5, the channel is in an idle state, and when the CBR is greater than 0.5 and less than 0.8, the channel is in an active state. The algorithm designs redundancy strategies based on coding mechanisms to improve the reliability of data transmission, combines coding mechanisms with routing design, incorporates routing switching ideas, and performs probability-based routing decisions to minimize the delay. In straight-line road sections, a fuzzy logic prediction-based vehicle adaptive connectivity clustering routing algorithm is proposed to reduce the communication overhead during vehicle collaboration and ensure high network connectivity; at intersections, a probability-based minimum delay routing decision algorithm is proposed to reduce the information transmission delay. Experiments show that the proposed method effectively improves the efficiency of data-aware collection and transmission, and increases the reliability of transmission. With the explosive growth of video services, the problem of intelligent transmission of DASH-based video streams has become another research hotspot in mobile edge networks. Based on the edge container cloud architecture of vehicular networking, the resource constraints of microservices when deployed in the edge cloud platform were analyzed, and a multi-objective optimization model for microservice resource scheduling was established with the comprehensive performance objectives of shortest microservice invocation distance, highest resource utilization of physical machine clusters, and ensuring load balancing as much as possible. [ABSTRACT FROM AUTHOR]

In the Internet of Things (IoT) ecosystem, localization is critical for tracking and monitoring targets via nodes. The distance vector-hop (DV-Hop) technique is a good choice for localizing neighborhood in IoT networks. The conventional DV-Hop algorithm is a distributed localization approach that does not consider the distribution of the nodes into full deliberation when calculating the hop count from the source to destined nodes. The transfer distance and node positions thus do not attain higher efficiency while ascertaining the distance between sources and destined nodes. The study aims to resolve the pitfalls in the traditional algorithm by making enhancements in controlling the original DV-Hop algorithm's hop count and transfer distance method by utilizing the particle swarm to estimate the node positions. Error rate in the distance between beacon nodes and unseen nodes is effectively reduced with the proposed technique that calculate error factors with corrections in a reversed fashion to revise hop counts. An escape factor is introduced to take control of updating particles' velocity in the system, and the inertia weight is defined by a piecewise function to enlarge search space. This mechanism increases the diversity of the particle populations and mitigates the tendency of estimations on node positions to be trapped into local optima under stationary state. Also, the improved DV-Hop algorithm described in the paper has a better convergence speed due to the presence of random inertia weight logarithmic method. Finally, the problem of premature convergence is also tackled as a variation factor is adopted in collaboration with a fitness function that affects the particles' movement range and assists in global convergence. The overall performance of improved DV-Hop is evaluated by statistical metrics and also compared with the traditional DV-Hop algorithm under simulated environment with the data collected from real-world scenarios. Industry 4.0 is fully dependent upon IoT and the count of hops is very important for deciding the routing from the source to destination for speedy transmission of data. The improved DV-hop algorithm can achieve better results and has reduced error rate by more than 30%. The DV-Hop algorithm plays an important role in IoT-enabled environment especially in Industry 4.0. [ABSTRACT FROM AUTHOR]

Table tennis is China 's national game and the proudest sport in China's sports field. During the research and technology service work of the Chinese table tennis team for many years, it has accumulated a large amount of valuable data on the analysis of skills and tactics of training and matches, match video, training monitoring, and so on. This paper discusses the relevant theory of swarm intelligence algorithm processing big data on the table tennis training competition knowledge interaction platform system, as well as the technical support of Nginx and Tomcat, and determines the technical basis of the table tennis training competition knowledge interaction platform. Through the establishment of the firefly algorithm model, the resource search ability is enhanced, and the traditional firefly algorithm is improved. From the results of the system performance test, it can be found that the improved swarm intelligence algorithm adopted in this paper improves the global convergence, and the load balancing degree gradually decreases with the increase of time. The improved firefly algorithm shows good performance when the bandwidth is low, and the resource occupancy rate is greatly reduced. When the bandwidth is 20, it is reduced by 12.55%. It solves the shortcomings of long time and low success rate, so as to verify the convenience of the system operation and the power of functions and make the platform more intelligent and efficient. [ABSTRACT FROM AUTHOR]

Recycling tasks are the most effective method for reducing waste generation, protecting the environment, and boosting the overall national economy. The productivity and effectiveness of the recycling process are strongly dependent on the cleanliness and precision of processed primary sources. However, recycling operations are often labor intensive, and computer vision and deep learning (DL) techniques aid in automatically detecting and classifying trash types during recycling chores. Due to the dimensional challenge posed by pre-trained CNN networks, the scientific community has developed numerous techniques inspired by biology, swarm intelligence theory, physics, and mathematical rules. This research applies a new meta-heuristic algorithm called the artificial hummingbird algorithm (AHA) to solving the waste classification problem based on feature selection. However, the performance of the AHA is barely satisfactory; it may be stuck in optimal local regions or have a slow convergence. To overcome these limitations, this paper develops two improved versions of the AHA called the AHA-ROBL and the AHA-OBL. These two versions enhance the exploitation stage by using random opposition-based learning (ROBL) and opposition-based learning (OBL) to prevent local optima and accelerate the convergence. The main purpose of this paper is to apply the AHA-ROBL and AHA-OBL to select the relevant deep features provided by two pre-trained models of CNN (VGG19 & ResNet20) to recognize a waste classification. The TrashNet dataset is used to verify the performance of the two proposed approaches (the AHA-ROBL and AHA-OBL). The effectiveness of the suggested methods (the AHA-ROBL and AHA-OBL) is compared with that of 12 modern and competitive optimizers, namely the artificial hummingbird algorithm (AHA), Harris hawks optimizer (HHO), Salp swarm algorithm (SSA), aquila optimizer (AO), Henry gas solubility optimizer (HGSO), particle swarm optimizer (PSO), grey wolf optimizer (GWO), Archimedes optimization algorithm (AOA), manta ray foraging optimizer (MRFO), sine cosine algorithm (SCA), marine predators algorithm (MPA), and rescue optimization algorithm (SAR). A fair evaluation of the proposed algorithms' performance is achieved using the same dataset. The performance analysis of the two proposed algorithms is applied in terms of different measures. The experimental results confirm the two proposed algorithms' superiority over other comparative algorithms. The AHA-ROBL and AHA-OBL produce the optimal number of selected features with the highest degree of precision. [ABSTRACT FROM AUTHOR]

This paper concerns the problem of vibration reduction during milling. For this purpose, it is proposed that the standard supports of the workpiece be replaced with adjustable stiffness supports. This affects the modal parameters of the whole system, i.e., object and its supports, which is essential from the point of view of the relative tool–workpiece vibrations. To reduce the vibration level during milling, it is necessary to appropriately set the support stiffness coefficients, which are obtained from numerous milling process simulations. The simulations utilize the model of the workpiece with adjustable supports in the convention of a Finite Element Model (FEM) and a dynamic model of the milling process. The FEM parameters are tuned based on modal tests of the actual workpiece. For assessing simulation results, the proper indicator of vibration level must be selected, which is also discussed in the paper. However, simulating the milling process is time consuming and the total number of simulations needed to search the entire available range of support stiffness coefficients is large. To overcome this issue, the artificial intelligence salp swarm algorithm is used. Finally, for the best combination of stiffness coefficients, the vibration reduction is obtained and a significant reduction in search time for determining the support settings makes the approach proposed in the paper attractive from the point of view of practical applications. [ABSTRACT FROM AUTHOR]

Breast cancer is one of the most common cancers in women, with an estimated 287,850 new cases identified in 2022. There were 43,250 female deaths attributed to this malignancy. The high death rate associated with this type of cancer can be reduced with early detection. Nonetheless, a skilled professional is always necessary to manually diagnose this malignancy from mammography images. Many researchers have proposed several approaches based on artificial intelligence. However, they still face several obstacles, such as overlapping cancerous and noncancerous regions, extracting irrelevant features, and inadequate training models. In this paper, we developed a novel computationally automated biological mechanism for categorizing breast cancer. Using a new optimization approach based on the Advanced Al-Biruni Earth Radius (ABER) optimization algorithm, a boosting to the classification of breast cancer cases is realized. The stages of the proposed framework include data augmentation, feature extraction using AlexNet based on transfer learning, and optimized classification using a convolutional neural network (CNN). Using transfer learning and optimized CNN for classification improved the accuracy when the results are compared to recent approaches. Two publicly available datasets are utilized to evaluate the proposed framework, and the average classification accuracy is 97.95%. To ensure the statistical significance and difference between the proposed methodology, additional tests are conducted, such as analysis of variance (ANOVA) and Wilcoxon, in addition to evaluating various statistical analysis metrics. The results of these tests emphasized the effectiveness and statistical difference of the proposed methodology compared to current methods. [ABSTRACT FROM AUTHOR]

Recently, swarm intelligence algorithms have received much attention because of their flexibility for solving complex problems in the real world. Recently, a new algorithm called the colony predation algorithm (CPA) has been proposed, taking inspiration from the predatory habits of groups in nature. However, CPA suffers from poor exploratory ability and cannot always escape solutions known as local optima. Therefore, to improve the global search capability of CPA, an improved variant (OLCPA) incorporating an orthogonal learning strategy is proposed in this paper. Then, considering the fact that the swarm intelligence algorithm can go beyond the local optimum and find the global optimum solution, a novel OLCPA-CNN model is proposed, which uses the OLCPA algorithm to tune the parameters of the convolutional neural network. To verify the performance of OLCPA, comparison experiments are designed to compare with other traditional metaheuristics and advanced algorithms on IEEE CEC 2017 benchmark functions. The experimental results show that OLCPA ranks first in performance compared to the other algorithms. Additionally, the OLCPA-CNN model achieves high accuracy rates of 97.7% and 97.8% in classifying the MIT-BIH Arrhythmia and European ST-T datasets. [ABSTRACT FROM AUTHOR]

To address the problems of low accuracy and slow convergence of traditional multilevel image segmentation methods, a symmetric cross-entropy multilevel thresholding image segmentation method (MSIPOA) with multi-strategy improved pelican optimization algorithm is proposed for global optimization and image segmentation tasks. First, Sine chaotic mapping is used to improve the quality and distribution uniformity of the initial population. A spiral search mechanism incorporating a sine cosine optimization algorithm improves the algorithm's search diversity, local pioneering ability, and convergence accuracy. A levy flight strategy further improves the algorithm's ability to jump out of local minima. In this paper, 12 benchmark test functions and 8 other newer swarm intelligence algorithms are compared in terms of convergence speed and convergence accuracy to evaluate the performance of the MSIPOA algorithm. By non-parametric statistical analysis, MSIPOA shows a greater superiority over other optimization algorithms. The MSIPOA algorithm is then experimented with symmetric cross-entropy multilevel threshold image segmentation, and eight images from BSDS300 are selected as the test set to evaluate MSIPOA. According to different performance metrics and Fridman test, MSIPOA algorithm outperforms similar algorithms in global optimization and image segmentation, and the symmetric cross entropy of MSIPOA algorithm for multilevel thresholding image segmentation method can be effectively applied to multilevel thresholding image segmentation tasks. [ABSTRACT FROM AUTHOR]

This paper discusses the merging of two optimization algorithms, atom search optimization and particle swarm optimization, to create a hybrid algorithm called hybrid atom search particle swarm optimization (h-ASPSO). Atom search optimization is an algorithm inspired by the movement of atoms in nature, which employs interaction forces and neighbor interaction to guide each atom in the population. On the other hand, particle swarm optimization is a swarm intelligence algorithm that uses a population of particles to search for the optimal solution through a social learning process. The proposed algorithm aims to reach exploration-exploitation balance to improve search efficiency. The efficacy of h-ASPSO has been demonstrated in improving the time-domain performance of two high-order real-world engineering problems: the design of a proportional-integral-derivative controller for an automatic voltage regulator and a doubly fed induction generator-based wind turbine systems. The results show that h-ASPSO outperformed the original atom search optimization in terms of convergence speed and quality of solution and can provide more promising results for different high-order engineering systems without significantly increasing the computational cost. The promise of the proposed method is further demonstrated using other available competitive methods that are utilized for the automatic voltage regulator and a doubly fed induction generator-based wind turbine systems. [ABSTRACT FROM AUTHOR]

Multi‐objective optimization problems frequently appear in many diverse research areas and application domains. Metaheuristics, as efficient techniques to solve them, need to be easily accessible to users with different expertise and programming skills. In this context, metaheuristic optimization frameworks are helpful, as they provide popular algorithms, customizable components and additional facilities to conduct experiments. Due to the broad range of available tools, this paper presents a systematic evaluation and experimental comparison of 10 frameworks, covering from multi‐purpose, consolidated tools to recent libraries specifically designed for multi‐objective optimization. The evaluation is organized around seven characteristics: search components and techniques, configuration, execution, utilities, external support and community, software implementation and performance. An analysis of code metrics and a series of experiments serves to assess the last two features. Lesson learned and open issues are also discussed as part of the comparative study. The outcomes of the evaluation process reveal a contrasted support to recent advances in multi‐objective optimization, with a lack of novel algorithms and variety of metaheuristics other than evolutionary algorithms. The experimental comparison also reports significant differences in terms of both execution time and memory usage under demanding configurations. [ABSTRACT FROM AUTHOR]

Based on the principle of particle swarm algorithm and support vector machine, this article aims to improve the classification performance of college English teaching effect and explores the best support vector machine parameter optimization algorithm to promote college English teaching for the theory and application research of data analysis. First, the advantages and disadvantages of common support vector machine parameter selection methods such as grid search algorithm, gradient descent method, and swarm intelligence algorithm are studied. Secondly, this article has a detailed analysis and comparison of various other algorithms. Finally, the study analyzed the advantages and disadvantages of the quantum particle swarm algorithm, introduced the dual-center idea into the quantum particle swarm algorithm, and proposed an improved quantum particle swarm algorithm. Through simulation experiments, it is proved that the improved quantum particle swarm algorithm is more superior in optimizing the parameters of support vector machine. In general, this paper uses the PSO algorithm to simultaneously solve the SVM feature selection and parameter optimization problems and has achieved good results. Within the scope of the literature that the author has, there is still a lack of work in this area. Compared with the existing algorithms, the algorithm proposed in this paper has stronger feature selection ability and higher efficiency. [ABSTRACT FROM AUTHOR]

Cost management is an important part of enterprise management and is fundamental to the survival and development of enterprises. Cost management is of great significance to promote production and cost-saving, strengthen cost accounting, improve management, and enhance the overall management level of enterprises. In this paper, different factors affecting mapping are combined with a group intelligence algorithm to study virtual network mapping, which dissects enterprise cost management in a new perspective and analyzes the relationship between enterprises in each supply chain and the association between the processes of each link in the supply chain. The algorithm uses node CPU, node degree, and neighboring bandwidth resources as advisors' strategies, respectively, and customers consult multiple advisors in the process of constructing mapping solutions, and the advisors give suggestions to customers according to their strategies. CGS-VNE uses an advisor-guided search mechanism to ensure the diversity of mapping solutions, which can fully explore the solution space and derive high-quality enterprise costing solutions through iteration. Whether in evaluating enterprise cost control or enhancing enterprise cost control capability, the value chain theory can be practically applied to clarify the current situation of enterprise cost control under the premise of combining theory and practice and truly achieve the fundamental purpose of helping enterprises to fully implement cost control. [ABSTRACT FROM AUTHOR]

Sensor deployment is an important issue in wireless sensor network (WSN), which is a typical nonlinear system. Conditions of both area coverage and point coverage should be considered in research studies on sensor coverage. It is generally necessary to ensure high coverage ratio of area when controlling sensor locations, and covering specific point targets to ensure long lifetime is also important sometimes. In current studies, swarm intelligence algorithms such as particle swarm optimization (PSO) are widely used to solve the sensor deployment problem in WSN. In this paper, coverage rate and network life indicators are analyzed comprehensively with establishment of a more general K-coverage model. In related calculation examples with different coverage requirements including target coverage, area coverage, and boundary coverage, several improved algorithms based on PSO are applied to solve the problem in the paper. Simulation results show that the improved algorithms can achieve a good performance and deployment effect. [ABSTRACT FROM AUTHOR]

Massively complex systems, such as social networks (Camacho, Panizo-LLedot, Bello-Orgaz, Gonzalez-Pardo, & Cambria, 2020; Lara-Cabrera et al., 2017), renewable energy problems (Twidell & Weir, 2015), or Internet-of-Things problems (Lin et al., 2017), generate massive amounts of data. This special issue welcomed submissions of original papers introducing research results on all the aspects covering the application of CI algorithms to massively complex systems, ranging from concepts and theoretical developments to advanced technologies and innovative applications. GRASP algorithm is also used in the paper by Pérez-Peló, Sánchez-Oro, & Duarte (2020), where the authors tackle the I i -separator problem. [Extracted from the article]

In the mobile crowdsensing task assignment, under the premise that the data platform does not know the user's perceived quality or cost value, how to establish a suitable user recruitment mechanism is the critical issue that this article needs to solve. It is necessary to learn the user's perceived quality in the execution p. It also needs to try its best to ensure the efficiency and profit maximization of the mobile group intelligence perception platform. Therefore, this paper proposes a mobile crowdsensing user recruitment algorithm based on Combinatorial Multiarmed Bandit (CMAB) to solve the recruitment problem with known and unknown user costs. Firstly, the user recruitment process is modeled as a combined multiarm bandit model. Each rocker arm represents the selection of different users, and the income obtained represents the user's perceived quality. Secondly, it proposes the upper confidence bound (UCB) algorithm, which updates the user's perceptual quality according to the completion of the task. This algorithm sorts the users' perceived quality values from high to low, then selects the most significant ratio of perceived quality to recruitment costs under the budget condition, assigns tasks, and updates their perceived quality. Finally, this paper introduces the regret value to measure the efficiency of the user recruitment algorithm and conducts many experimental simulations based on real data sets to verify the feasibility and effectiveness of the algorithm. The experimental results show that the recruitment algorithm with known user cost is close to the optimal algorithm, and the recruitment algorithm with unknown user cost is more than 75% of the optimal algorithm result, and the gap tends to decrease as the budget cost increases, compared with other comparisons. The algorithm is 25% higher, which proves that the proposed algorithm has good learning ability and can independently select high-quality users to realize task assignments. [ABSTRACT FROM AUTHOR]

In recent years, there is massive development of new metaheuristics as stochastic methods. Meanwhile, there is not any metaheuristics is powerful to handle all problems as stated in the no-free-lunch (NFL) theory. Based on this circumstance, this paper introduces a new swarm-based metaheuristics with the main strategy moving toward the resultant of better swarm members and avoiding the resultant of worse swarm members called group better-worse algorithm (GBWA). It consists of five searches: moving toward the best swarm member, moving toward the resultant of better swarm members, moving away from the resultant of worse swarm members, searching locally, and jumping to the opposite area. GBWA is then evaluated in three ways. The first evaluation is a comparative evaluation where GBWA is compared to five recent metaheuristics: coati optimization algorithm (COA), average and subtraction-based optimization (ASBO), clouded leopard optimization (CLO), total interaction algorithm (TIA), and osprey optimization algorithm (OOA). The second evaluation is the individual search evaluation. The third evaluation is hyperparameter test. The collection of 23 classic functions is chosen as the use case in all evaluations. The result of the first evaluation shows that GBWA is better than COA, ASBO, CLO, TIA, and OOA in 20, 21, 20, 21, and 21 functions consecutively. Meanwhile, the result of the second evaluation shows the equal contribution between the motion toward the best swarm member and the motion toward the resultant of better swarm members. [ABSTRACT FROM AUTHOR]

A new swarm-based metaheuristic, namely the enriched coati osprey algorithm (ECOA), is proposed in this paper. As its name suggests, ECOA hybridizes two new metaheuristics, the coati optimization algorithm (COA) and the osprey optimization algorithm (OOA). ECOA is constructed by five searches performed sequentially by the swarm members. The first three are directed searches, while the last two are neighborhood searches. All three directed searches are adopted from COA and OOA. Meanwhile, the four-bordered neighborhood search is developed based on a new approach. During the assessment, ECOA was challenged to overcome the set of 23 functions and contended with five new metaheuristics: total interaction algorithm (TIA), golden search optimization (GSO), average and subtraction-based optimization (ASBO), COA, and OOA. The result shows that ECOA outperforms TIA, GSO, ASBO, COA, and OOA in 16, 23, 18, 21, and 21 functions. Meanwhile, the individual search test result shows that the directed searches perform better than the neighborhood searches. Moreover, the directed search toward the best member becomes the most dominant search. [ABSTRACT FROM AUTHOR]

The Honey Badger Algorithm (HBA) represents a novel swarm intelligence optimization algorithm introduced in recent years. However, its predominant constraints are linked to inadequate convergence accuracy and a vulnerability to entrapment in local optima. In an effort to mitigate these challenges, this paper introduces an Improved Honey Badger Algorithm Based on a Hybrid Strategy (OHBA). Firstly, during the population initialization phase, a method involving the utilization of a good point set is introduced to enhance the diversity and introduce more randomness into the population. Secondly, in the position update phase, the Beta distribution is employed as an alternative to the Uniform distribution, aiming to strike a balance between global exploration and local exploitation capabilities. Thirdly, an improved adaptive density factor strategy is incorporated into both global and local position updates to enhance the algorithm's convergence precision and speed. Lastly, within the global exploration stage, a Cauchy mutation strategy based on the Sine chaotic mapping is introduced to facilitate the algorithm in overcoming local optima and reinforcing its optimization capabilities. The improved algorithm's performance has been evaluated through a comprehensive set of assessments, including CEC-2017 functions, CEC-2022 functions, Wilcoxon rank-sum tests, and practical engineering optimization problems. These evaluations were undertaken to assess the algorithm in comparison to classical intelligent optimization algorithms. The experimental results show that OHBA possesses significant advantages in terms of convergence speed, optimization accuracy, robustness and its practical utility and effectiveness in addressing complex optimization challenges. This establishes OHBA as a highly competitive option in these critical aspects of optimization. [ABSTRACT FROM AUTHOR]

In wireless networks, multiple monitoring nodes are used to collect users' transmission data in real time, which can be used for fault diagnosis and analytical feedback of the wireless network. Due to the limited number of monitoring nodes, key issues include how to optimize and schedule the channel resources of each node to cover more users, obtain more network data, and maximize the quality of network monitoring. In this paper, a channel allocation algorithm based on swarm intelligence—"discrete bacterial foraging optimization"—is proposed based on the classic bacterial foraging optimization algorithm. The position of each dimension in the iterative process is discretized to binary 0 or 1 to encode and express the channel allocation problem of wireless monitoring networks, and the channel allocation scheme is optimized by location updates guided by bacterial foraging. Many simulation and practical experiments have proved the effectiveness of the algorithm, and it also has low complexity and provable convergence. Compared with similar algorithms, this algorithm improves monitoring quality by 1.428% while boosting speed by up to 32.602%. The algorithm has lower complexity, higher performance, and can converge to the optimal solution at a faster rate. [ABSTRACT FROM AUTHOR]

Artificial Neural Networks (ANNs) are intricate mathematical models inspired by the human neural system, holding great promise in the development of artificial intelligence. In the context of biotechnological applications within logistics, ANNs offer robust adaptability and fault tolerance. However, to unlock their full potential, the integration of swarm intelligence algorithms for parameter optimization has gained attention. This paper addresses the intersection of artificial intelligence, biotechnology, and logistics. Specifically, we focus on the critical task of efficiently constructing neural network models to enhance their performance in biotechnological logistics applications. Two key research areas are explored: Innovative Optimization Strategies: We propose novel strategies for optimizing ANNs using swarm intelligence algorithms. These strategies incorporate inverse learning techniques and neighborhood perturbation operations with dynamic probabilities. They expedite the escape from local optima and enhance the accurate exploration of adjacent regions. Such optimization is vital for effectively adapting ANNs to the complex challenges presented by biotechnological logistics. Freight Volume Forecasting in Biotechnology Logistics: Our research investigates the multifaceted factors influencing freight volume in the context of biotechnological logistics. We consider both the demands of the biotechnology sector and the logistical supply chain, identifying key indicators with strong correlations to freight volume. This analysis aids in refining predictions and optimizing resource allocation in biotechnological logistics. This paper underscores the convergence of artificial neural networks and swarm intelligence algorithms, emphasizing their application within the biotechnological logistics domain. The proposed optimization strategies aim to elevate the performance of ANNs in addressing the unique challenges posed by biotechnological logistics, ultimately fostering efficiency and precision. We outline future research directions to further harness the potential of these techniques for biotechnological applications in logistics. [ABSTRACT FROM AUTHOR]

A multi-swarm-evolutionary structure based on the parasitic relationship in the biosphere is proposed in this paper and, according to the conception, the Para-PSO-ABC algorithm (ParaPA), combined with merits of the modified particle swarm optimization (MPSO) and artificial bee colony algorithm (ABC), is conducted with the multimodal routing strategy to enhance the safety and the cost issue for the mobile robot path planning problem. The evolution is divided into three stages, where the first is the independent evolutionary stage, with the same evolution strategies for each swarm. The second is the fusion stage, in which individuals are evolved hierarchically in the parasitism structure. Finally, in the interaction stage, a multi-swarm-elite strategy is used to filter the information through a predefined cross function among swarms. Meanwhile, the segment obstacle-avoiding strategy is proposed to accelerate the searching speed with two fitness functions. The best path is selected according to the performance on the safety and consumption issues. The introduced algorithm is examined with different obstacle allocations and simulated in the real routing environment compared with some typical algorithms. The results verify the productiveness of the parasitism-relation-based structure and the stage-based evolution strategy in path planning. [ABSTRACT FROM AUTHOR]