Search

Dementia diagnosis often relies on expensive and invasive neuroimaging techniques that limit access to early screening. This study proposes an innovative approach for facilitating early dementia screening by estimating diffusion tensor imaging (DTI) measures using accessible lifestyle and brain imaging factors. Conventional DTI analysis, though effective, is often hindered by high costs and limited accessibility. To address this challenge, fuzzy subtractive clustering identified 14 influential variables from the Lifestyle for Brain Health and Brain Atrophy and Lesion Index frameworks, encompassing demographics, medical conditions, lifestyle factors, and structural brain markers. A multilayer perceptron (MLP) neural network was developed using these selected variables to predict fractional anisotropy (FA), a DTI metric reflecting white matter integrity and cognitive function. The MLP model achieved promising results, with a mean squared error of 0.000 878 on the test set for FA prediction, demonstrating its potential for accurate DTI estimation without costly neuroimaging techniques. The FA values in the dataset ranged from 0 to 1, with higher values indicating greater white matter integrity. Thus, a mean squared error of 0.000 878 suggests that the model's predictions were highly accurate compared to the observed FA values. This multifactorial approach aligns with the current understanding of dementia's complex etiology influenced by various biological, environmental, and lifestyle factors. By integrating readily available data into a predictive model, this method enables widespread, cost-effective screening for early dementia risk assessment. The proposed accessible screening tool could facilitate timely interventions, preventive strategies, and efficient resource allocation in public health programs, ultimately improving patient outcomes and caregiver burden. [ABSTRACT FROM AUTHOR]

This article first reviews the position control of piezoelectric actuators, particularly charge-based sensorless control systems, which often include a charge estimator as a key component. The rest of the paper is about charge estimators for piezoelectric actuators. Two of the most recent/effective types of these estimators utilise either a sensing capacitor (type I in this paper) or a sensing resistor (type II); the latter (and the newer) type is broadly known as a digital charge estimator. Some experimental results in the literature show that, with the same loss in excitation voltage, a considerably higher amount of charge can be estimated with a type II estimator in comparison with a type I estimator; therefore, the superiority of type II estimators was acknowledged. In order to re-assess this conclusion, this paper equitably compares type I and II estimators through analytical modelling and experimentation. The results indicate that type II estimators have only a slight advantage in estimating higher amounts of charge, if both type I and II estimators are designed appropriately. At the same time, type II estimators have disadvantages; e.g., the resistance of type II estimators has to be tuned to suit different excitation frequencies. This research concludes that capacitor-based (type I) charge estimators for piezoelectric actuators, with pertinent design and implementation, can be still the prime solution for many charge estimation problems despite claims in the literature in the last decade. [ABSTRACT FROM AUTHOR]

In this research, a design guideline for a kinetic energy converter using a cantilever triple-layer piezoelectric harvester (CTLPH) for low-frequency applications is presented. By combining the constitutive and internal energy equations, the analytical equations for harvested voltage and power were developed. It was also found that frequency of motion, applied tip force, piezoelectric coefficients, geometrical dimensions, and mechanical properties of layers play significant roles in the performance of the harvester. Having characterised the voltage regulator module, LTC3588, the dependency of output voltage on both the storage and output capacitors of the LTC3588 was investigated. An experimental measurement using the optical method was carried out to determine the applied tip force. Furthermore, the performance of the CTLPH in low frequencies (<3.3 Hz) for various resistive loads was investigated. It was found that both excitation frequency and external resistance load are effective on the maximum generated power. The developed CTLPH shows the optimum power of 17.31 μ W at the external resistance of 20 kΩ, which is highly appropriate for micropower devices with at least 3.2 Hz of kinetic vibration in their environment. [ABSTRACT FROM AUTHOR]

Ionic liquids have many interesting properties as they share the properties of molten salts as well as organic liquids, such as low volatility, thermal stability, electrical conductivity, non-flammability, and much more. Ionic liquids are known to be good solvents for many polar and nonpolar solutes. Combined with their special properties, ionic liquids are good replacements for the conventional toxic and volatile organic solvents. Each ionic liquid has different properties than others. In order to alter, tune, and enhance the properties of ionic liquids, sometimes, it is necessary to mix different ionic liquids to achieve the desired properties. However, using mixtures of ionic liquids in chemical processes requires reliable estimations of the mixtures' physical properties such as refractive index and density. The ionic liquids used in this work are 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([HMIM][BF4]), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF6]). These ionic liquids were supplied by Io-li-tec and used as received. However, new measurements for the density and refractive index were taken for the pure ionic liquids to be used as reference. In the present work, the densities and refractive indices of four different binary mixtures of ionic liquids with common cations and/or anions have been measured at various compositions and room conditions. The accuracy of different empirical mixing rules for calculation of the mixtures refractive indices was also studied. It was found that the overall absolute average percentage deviation from the ideal solution in the calculation of the molar volume of the examined binary mixtures was 0.78%. Furthermore, all of the examined mixing rules for the calculation of the refractive indices of the mixtures were found to be accurate. However, the most accurate empirical formula was found to be Heller's relation, with an average percentage error of 0.24%. Furthermore, an artificial intelligence model, an adaptive neuro-fuzzy inference system (ANFIS), was developed to predict the density and refractive index of the different mixtures studied in this work as well as the published literature data. The predictions of the developed model were analyzed by various methods including both statistical and graphical approaches. The obtained results show that the developed model accurately predicts the density and refractive index with overall R2, RMSE, and AARD% values of 0.968, 7.274, 0.368% and 0.948, 7.32 × 10−3 and 0.319%, respectively, for the external validation dataset. Finally, a variance-based global sensitivity analysis was formed using extended the Fourier amplitude sensitivity test (EFAST). Our modelling showed that the ANFIS model outperforms the best available empirical models in the literature for predicting the refractive index of the different mixtures of ionic liquids. [ABSTRACT FROM AUTHOR]

Experiments have shown that, for an extensive area of operating, charge of a piezoelectric actuator is proportional to its displacement from relaxing state. Consequently, accurate estimation of charge can lead to position/displacement estimation for piezoelectric actuators, a prominent progress towards precise sensorless micro/nanopositioning. However, disadvantageously, all known charge estimators of piezoelectric actuators have electrical element(s), e.g. (a) resistor(s) or (a) capacitor(s), in series with the actuator. Such elements, known as sensing elements, take a considerable share of the excitation voltage. Voltage taken by the sensing elements is called voltage drop. Charge estimators with a resistor in series with the actuator (also known as digital charge estimators) have been reported to witness the smallest voltage drop. The aim of this paper is to design such charge estimators so as to achieve maximum precision at minimum possible voltage drop. The aforementioned aim is shown to be obtained when the range of the voltage across the resistor equals the narrowest input range of the analogue to digital convertor of the charge estimator. This, however, is impossible to happen for wide operating areas with a sensing resistor with unchangeable resistance, according to experimental results. The alternative is an adaptive charge estimator with a resistor, in which its resistance varies with operating conditions. This paper presents two methods to estimate such a varying sensing resistor: approximate analytical formulation and artificial intelligence, in which, the latter shows evident superiority. [ABSTRACT FROM AUTHOR]

Summary: A new inspection technique for complex mechanical structures is proposed in this paper, where a fuzzy inference system carries out structural inspection. The inputs to the fuzzy inference system are the elements of a fault signature, an array of numbers prepared with use of below 5 kHz resonance frequencies of faultless and a number of faulty specimens. Advantage: Below 5 kHz resonance frequencies are easier and less expensive to obtain compared to higher frequency ones. Limit: Due to high expenses of experiments, reliable finite element models were alternatively used to obtain resonance frequencies of the faulty specimens. Results: The developed fuzzy inference system in this research accurately located an under-surface fault in an engine cylinder block. [ABSTRACT FROM AUTHOR]

This paper aims at introduction, design, and validation of a temperature estimation algorithm for an infrared dryer. The proposed algorithm estimates the temperature at one or some points in a thermal system (e.g., an infrared dryer) based on the measured temperature at a number of other points. In this research, the designed algorithm estimates the temperature of a single point; however, the methodology can be evidently extended to multiple points. Inspired by direct and inverse heat transfer models, a mathematical model is presented for this purpose. This model is developed and identified using artificial neural network (ANN) technique and laboratory experimental data. The proposed method exhibits excellent accuracy with no need to thermo-physical properties of the system. [ABSTRACT FROM AUTHOR]