Search

There is a large amount of drilling core data in the Mackay River oil sands block in Canada, and the accurate identification of facies from the cores is important and necessary for the understanding of the subsurface reservoir. The traditional recognition method of facies from cores is by human work and is very time consuming. Furthermore, the results are different according to different geologists because of the subjective judgment criterion. An efficient and objective method is important to solve the above problem. In this paper, the deep learning image-recognition algorithm is used to automatically and intelligently recognize the facies type from the core image. Through a series of high-reliability preprocessing operations, such as cropping, segmentation, rotation transformation, and noise removal of the original core image, that have been manually identified, the key feature information in the images is extracted based on the ResNet50 convolutional neural network. On the dataset of about 200 core images from 13 facies, an intelligent identification system of facies from core images is constructed, which realizes automatic facies identification from core images. Comparing this method with traditional convolutional neural networks and support vector machines (SVM), the results show that the recognition accuracy of this model is as high as 91.12%, which is higher than the other two models. It is also shown that for a relatively special dataset, such as core images, it is necessary to rely on their global features in order to classify them, and, with a large similarity between some of the categories, it is extremely difficult to classify them. The selection of a suitable neural network model can have a great impact on the accuracy of recognition results. Then, the recognized facies are input as hard data to construct the three-dimensional facies model, which reveals the complex heterogeneity and distribution of the subsurface reservoir for further exploration and development. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Remote Sensing is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

• Groundwater level prediction for a long period of time is considered in this paper. • We proposed a graph-based machine learning using which the spatial relationships are taken into account. • Our results indicate that spatial correlations are helpful when one deals with geospatial data. • The proposed method is compared with standard techniques. Accurate prediction of groundwater level (GWL) over a period of time is of great importance for groundwater resources management. Machine learning techniques due to their great performance have recently been used for this problem. Previous methods, however, did not consider the spatial relationships between wells due to the difficulty to handle unstructured well location data. In this paper, a graph neural network (GNN) is used to forecast groundwater dynamics where it can represent each well as a node in the graph. The spatial information is, thus, extracted from an interconnected network using graph convolution layers with a self-adaptive adjacency matrix. The temporal features of the sequence are obtained by gated temporal convolutional networks. The model was applied and evaluated for wells in the southwest area of British Colombia in Canada using data about 11 years (2010–2020). The proposed model performs better in terms of all the defined evaluation metrics, when compared with two baseline models: long short-term memory (LSTM) and gated recurrent units (GRU). Moreover, when the spatial dependencies are completely unknown, the model can still learn them from the data and obtain comparable performance. Furthermore, the proposed model has a high efficiency since it can simultaneously model GWL change for all monitoring wells in the system. We also demonstrated that the spatial dependencies between each well could be intuitively interpreted from the learned adjacency matrix. [ABSTRACT FROM AUTHOR]

Accurate estimation of mineral composition is essential for refined reservoir characterization, thermal conductivity and mechanical determinations of sedimentary rocks, but is extremely challenging in shale units due to the mineralogical complexity, low porosity and ultra‐low permeability. Direct mineral measurements derived from laboratory X‐ray diffraction (XRD) analysis on core samples and borehole geochemical logging tool (GLT), and conventional geophysical logs from vertical wells penetrating sediments are widely available in some basins, which enables detailed mineralogical characterization of a well. A hybrid machine learning (ML) architecture that improves model training and validation by combining convolutional neural network (CNN) with XGBoost allows accurate description of the mineralogical compositions across a basin. We applied this ML approach to predict the mineral compositions using conventional well logs from the Horn River Basin, northeast British Columbia, Canada, where extensive drilling for shale‐gas and conventional hydrocarbon resources, complemented by high temperature geothermal energy potential is ideal for case testing. The predicted mineral compositions from the ML approach are consistent with the mineralogical readings from the GLT and are confirmed by the XRD mineral measurements. This allows basin‐wide mineral compositions mapping that reveals spatial trends of major mineral compositions and their relationship with the previously recognized geomechanical and geological features, which have important implications for thermal conductivity modeling, reservoir evaluation and extensive geological studies. Key Points: A hybrid machine learning approach is applied to develop log‐mineral models for mineralogy characterization using geophysical well logsThe model‐predicted major mineral compositions are consistent with the mineral data from geochemical logging tool and XRD analysisThe Horn River Group shale is dominated by quartz, clay, and carbonate and shows great variability among the three formations in the basin [ABSTRACT FROM AUTHOR]

Lichen mapping is vital for caribou management plans and sustainable land conservation. Previous studies have used random forest, dense neural network, and convolutional neural network models for mapping lichen coverage. However, to date, it is not clear how these models rank in this task. In this study, these machine learning models were evaluated on their ability to predict lichen percent coverage in Sentinel-2 imagery in Québec and Labrador, Canada. The models were trained on 10-m resolution lichen coverage (%) maps created from 20 drone surveys collected in July 2019 and 2022. The dense neural network achieved a higher accuracy than the other two, with a reported mean absolute error of 5.2% and an R2 of 0.76. By comparison, the random forest model returned a mean absolute error of 5.5% (R2: 0.74) and the convolutional neural network had a mean absolute error of 5.3% (R2: 0.74). A regional lichen map was created using the trained dense neural network and a Sentinel-2 imagery mosaic. There was greater uncertainty on land covers that the model was not exposed to in training, such as mines and deep lakes. While the dense neural network requires more computational effort to train than a random forest model, the 5.9% performance gain in the test pixel comparison renders it the most suitable for lichen mapping. This study represents progress toward determining the appropriate methodology for generating accurate lichen maps from satellite imagery for caribou conservation and sustainable land management. [ABSTRACT FROM AUTHOR]

• A convolutional neural network-based method to calculate the composite system reliability indices. • A data generation scheme to both train the CNN and calculate reliability indices. • Training and testing algorithm for the CNN to calculate composite system reliability indices. • Developing mathematical model to calculate composite system reliability indices. This paper proposes a machine learning-based approach in conjunction with Monte Carlo simulation (MCS) to improve the computation efficiency of composite power system reliability evaluation. Traditional composite system reliability evaluation approaches are computationally demanding and may become inapplicable to large integrated power grids due to the requirements of repetitively solving optimal power flow (OPF) for a large number of system states. Machine learning-based approaches have been used to avoid solving OPF in composite system reliability evaluation except in the training stage. However, current approaches have been derived to classify system states into success and failure states (i.e., up or down). In other words, they can be used to evaluate power system probability and frequency reliability indices, but they cannot be used to evaluate power and energy reliability indices unless OPF is solved for each failure state to determine minimum load curtailments. In this paper, a convolutional neural network (CNN)-based regression approach is proposed to determine the minimum amount of load curtailments of sampled states without solving OPF, except in the training stage. Minimum load curtailments are then used to evaluate power and energy indices (e.g., expected demand not supplied) as well as to evaluate the probability and frequency indices. The proposed approach is applied on several systems including the IEEE Reliability Test Systems (The IEEE RTS and IEEE RTS-96) and Saskatchewan Power Corporation in Canada. Results show that the proposed approach is computationally efficient (fast and accurate) in calculating the most common composite system reliability indices. The developed source code of the proposed method is available to the community for future research and development. [ABSTRACT FROM AUTHOR]

Wetlands are important ecosystems that are linked to climate change mitigation. As 25% of global wetlands are located in Canada, accurate and up-to-date wetland classification is of high importance, nationally and internationally. The advent of deep learning techniques has revolutionized the current use of machine learning algorithms to classify complex environments, specifically in remote sensing. In this paper, we explore the potential and possible limitations to be overcome regarding the use of ensemble deep learning techniques for complex wetland classification and discusses the potential and limitation of various solo convolutional neural networks (CNNs), including DenseNet, GoogLeNet, ShuffleNet, MobileNet, Xception, Inception-ResNet, ResNet18, and ResNet101 in three different study areas located in Newfoundland and Labrador, Canada (i.e., Avalon, Gros Morne, and Grand Falls). Moreover, to improve the classification accuracies of wetland classes of bog, fen, marsh, swamp, and shallow water, the results of the three best CNNs in each study area is fused using three supervised classifiers of random forest (RF), bagged tree (BTree), Bayesian optimized tree (BOT), and one unsupervised majority voting classifier. The results suggest that the ensemble models, in particular BTree, have a valuable role to play in the classification of wetland classes of bog, fen, marsh, swamp, and shallow water. The ensemble CNNs show an improvement of 9.63–19.04% in terms of mean producer's accuracy compared to the solo CNNs, to recognize wetland classes in three different study areas. This research indicates a promising potential for integrating ensemble-based learning and deep learning for operational large area land cover, particularly complex wetland type classification. [ABSTRACT FROM AUTHOR]

Due to the alarming rate of climate change, fuel consumption and emission estimates are critical in determining the effects of materials and stringent emission control strategies. In this research, an analytical and predictive study has been conducted using the Government of Canada dataset, containing 4973 light-duty vehicles observed from 2017 to 2021, delivering a comparative view of different brands and vehicle models by their fuel consumption and carbon dioxide emissions. Based on the findings of the statistical data analysis, this study makes evidence-based recommendations to both vehicle users and producers to reduce their environmental impacts. Additionally, Convolutional Neural Networks (CNN) and various regression models have been built to estimate fuel consumption and carbon dioxide emissions for future vehicle designs. This study reveals that the Univariate Polynomial Regression model is the best model for predictions from one vehicle feature input, with up to 98.6% accuracy. Multiple Linear Regression and Multivariate Polynomial Regression are good models for predictions from multiple vehicle feature inputs, with approximately 75% accuracy. Convolutional Neural Network is also a promising method for prediction because of its stable and high accuracy of around 70%. The results contribute to the quantifying process of energy cost and air pollution caused by transportation, followed by proposing relevant recommendations for both vehicle users and producers. Future research should aim towards developing higher performance models and larger datasets for building APIs and applications. [ABSTRACT FROM AUTHOR]

• Using deep temporal convolutional networks for building simulation surrogate models. • Deep network processes annual hourly weather time series data (≈ 150,000 inputs). • Accurate emulation of simulation outcomes for all locations in Canada. • 3% error in estimating annual heating demand for unseen locations and building designs. • Reasonable accuracy ( R 2 = 0.92) in estimating hourly demands given weather data. Surrogate models can emulate physics-based building energy simulation with a machine learning model trained on simulation input and output data. The trained model is extremely fast to run, allowing us to estimate simulation outcomes for thousands of different building designs in seconds. Recent studies have shown the diverse benefits for sustainable building design. Surrogates were applied to provide rapid feedback at the early design stage, to accelerate sensitivity analysis, uncertainty analysis and design optimization, or to improve building model calibration. However, the current process of surrogate modelling offers much room for improvement. In particular, a surrogate model is bound to the specific building design problem it has been trained for. This includes a specific site, requiring time-intensive retraining if the building performance at another location is to be analysed. In this paper, we develop a single surrogate model that spans arbitrarily many locations. For that purpose, we are among the first to use a deep temporal convolutional neural network to process annual multivariate weather data with hourly resolution (≈ 150,000 inputs). The network learns features relevant to estimate heating or cooling demand. We combine these location-specific weather features with building design parameters to serve as input to a single surrogate model (feed-forward neural network). In a case study with 569 weather files from locations in Canada, we show that the surrogate model deviates by less than 3% when predicting annual heating demand for new building designs at locations outside of the training data set. [ABSTRACT FROM AUTHOR]

Biological data sets are increasingly becoming information-dense, making it effective to use a computer science-based analysis. We used convolution neural networks (CNN) and the specific CNN architecture Unet to study sponge behavior over time. We analyzed a large time series of hourly high-resolution still images of a marine sponge, Suberites concinnus (Demospongiae, Suberitidae) captured between 2012 and 2015 using the NEPTUNE seafloor cabled observatory, off the west coast of Vancouver Island, Canada. We applied semantic segmentation with the Unet architecture with some modifications, including adapting parts of the architecture to be more applicable to three-channel images (RGB). Some alterations that made this model successful were the use of a dice-loss coefficient, Adam optimizer and a dropout function after each convolutional layer which provided losses, accuracies and dice scores of up to 0.03, 0.98 and 0.97, respectively. The model was tested with five-fold cross-validation. This study is a first step towards analyzing trends in the behavior of a demosponge in an environment that experiences severe seasonal and inter-annual changes in climate. The end objective is to correlate changes in sponge size (activity) over seasons and years with environmental variables collected from the same observatory platform. Our work provides a roadmap for others who seek to cross the interdisciplinary boundaries between biology and computer science. [ABSTRACT FROM AUTHOR]

In 2014, through the World-Class Tanker Safety System (WCTSS) initiative, the Government of Canada launched the Northern Marine Transportation Corridors (NMTC) concept. The corridors were created as a strategic framework to guide Federal investments in marine transportation in the Arctic. With new government investment, under the Oceans Protection Plan (OPP), the corridors initiative, known as the Northern Low-Impact Shipping Corridors, will continue to be developed. Since 2016, the Canadian Hydrographic Service (CHS) has been using the corridors as a key layer in a geographic information system (GIS) model known as the CHS Priority Planning Tool (CPPT). The CPPT helps CHS prioritize its survey and charting efforts in Canada's key traffic areas. Even with these latest efforts, important gaps in the surveys still need to be filled in order to cover the Canadian waterways. To help further develop the safety to navigation and improve survey mission planning, CHS has also been exploring new technologies within remote sensing. Under the Government Related Initiatives Program (GRIP) of the Canadian Space Agency (CSA), CHS has been investigating the potential use of Earth observation (EO) data to identify potential hazards to navigation that are not currently charted on CHS products. Through visual interpretation of satellite imagery, and automatic detection using artificial intelligence (AI), CHS identified several potential hazards to navigation that had previously gone uncharted. As a result, five notices to mariners (NTMs) were issued and the corresponding updates were applied to the charts. In this study, two AI approaches are explored using deep learning and machine learning techniques: the convolution neural network (CNN) and random forest (RF) classification. The study investigates the effectiveness of the two models in identifying shoals in Sentinel-2 and WorldView-2 satellite imagery. The results show that both CNN and RF models can detect shoals with accuracies ranging between 79 and 94% over two study sites; however, WorldView-2 images deliver results with higher accuracy and lower omission errors. The high processing times of using high-resolution imagery and training a deep learning model may not be necessary in order to quickly scan images for shoals; but training a CNN model with a large training set may lead to faster processing times without the need to train individual images. [ABSTRACT FROM AUTHOR]

Despite recent advances of deep Convolutional Neural Networks (CNNs) in various computer vision tasks, their potential for classification of multispectral remote sensing images has not been thoroughly explored. In particular, the applications of deep CNNs using optical remote sensing data have focused on the classification of very high-resolution aerial and satellite data, owing to the similarity of these data to the large datasets in computer vision. Accordingly, this study presents a detailed investigation of state-of-the-art deep learning tools for classification of complex wetland classes using multispectral RapidEye optical imagery. Specifically, we examine the capacity of seven well-known deep convnets, namely DenseNet121, InceptionV3, VGG16, VGG19, Xception, ResNet50, and InceptionResNetV2, for wetland mapping in Canada. In addition, the classification results obtained from deep CNNs are compared with those based on conventional machine learning tools, including Random Forest and Support Vector Machine, to further evaluate the efficiency of the former to classify wetlands. The results illustrate that the full-training of convnets using five spectral bands outperforms the other strategies for all convnets. InceptionResNetV2, ResNet50, and Xception are distinguished as the top three convnets, providing state-of-the-art classification accuracies of 96.17%, 94.81%, and 93.57%, respectively. The classification accuracies obtained using Support Vector Machine (SVM) and Random Forest (RF) are 74.89% and 76.08%, respectively, considerably inferior relative to CNNs. Importantly, InceptionResNetV2 is consistently found to be superior compared to all other convnets, suggesting the integration of Inception and ResNet modules is an efficient architecture for classifying complex remote sensing scenes such as wetlands. [ABSTRACT FROM AUTHOR]