Search

In this work, we evaluate the feasibility of carbide-derived carbons (CDCs) as reliable and highly efficient adsorbents for the removal of pharmaceuticals from water. CDCs were produced from titanium carbide at temperatures within the range of 800–1400 °C employing chlorine as extraction agent. The materials were physicochemically characterized and tested in the adsorption of two relevant pharmaceuticals (diclofenac (DCF) and metronidazole (MNZ)) in aqueous solutions. We found that the specific surface area in combination with a low functionalized surface plays a key role on the adsorption capacity of the material while the average pore size determines the kinetics of the process. Notably, the CDCs showed an outstanding adsorptive behaviour compared to different conventional carbon materials under the same operating conditions, which was attributed not only to their high surface areas but mainly to their strong hydrophobic properties. The optimum material (specific surface area of 1676 m 2  g −1 ) showed extremely high adsorption capacity values (551 and 410 mg g −1 for DCF and MNZ, respectively). Remarkably, the process was very fast (10 min of equilibrium time) even using low doses of adsorbent (0.3 mg mL −1 ). The performance of the optimum CDC was also demonstrated in bi-component systems while its versatility was demonstrated in a real wastewater treatment plant (WWTP) effluent, obtaining a good performance in terms of adsorption capacity (up to ∼400 mg DCF  g −1 ) and kinetics (equilibrium time of 10 min). These results demonstrate the promise of CDCs for reliable, effective and fast flow-through tertiary water treatment. [ABSTRACT FROM AUTHOR]

This work aims at evaluating the role of nature, size, age, and natural organic matter (NOM) fouling of realistic microplastics (MPs) on the adsorption of two persistent micropollutants (diclofenac (DCF) and metronidazole (MNZ)). For such goal, four representative polymer types (polystyrene (PS), polyethylene terephthalate (PET), polypropylene (PP) and high-density polyethylene (HDPE)) were tested. MPs were obtained by cryogenic milling of different commercial materials (disposable bottles, containers, and trays), and fully characterized (optical microscopic and SEM images, FTIR, elemental analysis, water contact angle and pH slurry). The micropollutants hydrophobicity determined to a high extent their removal yield from water. Regardless of the MP's nature, the adsorption capacity for DCF was considerably higher than the achieved for MNZ, which can be related to its stronger hydrophobic properties and aromatic character. In fact, aromatic MPs (PS and PET) showed the highest adsorption capacity values with DCF (~100 μg g−1). The MP size also played a key role on its adsorption capacity, which was found to increase with decreasing the particle size (20–1000 μm). MPs aging (simulated by Fenton oxidation) led also to substantial changes on their sorption behavior. Oxidized MPs exhibited acidic surface properties which led to a strong decrease on the adsorption of the hydrophobic micropollutant (DCF) but to an increase with the hydrophilic one (MNZ). NOM fouling (WWTP effluent, river water, humic acid solution) led to a dramatic decrease on the MPs sorption capacity due to sorption sites blocking. Finally, the increase of pH or salinity of the aqueous medium increased the micropollutants desorption. [Display omitted] • The capacity of PS, PET, PP and HDPE realistic microplastics for DCF and MNZ uptake was evaluated. • Hydrophobic interactions governed the adsorption, being DCF adsorbed to a higher extent. • MPs oxidation led to their surface acidification, modifying their adsorption performance. • NOM fouling led to a decrease on MPs adsorption capacity due to sorption sites blocking. • The increase of pH or salinity increased the desorption of micropollutants. [ABSTRACT FROM AUTHOR]

• Carbon-encapsulated iron nanoparticles (CE-nFe) prepared by hydrothermal carbonization. • CE-nFe showed a core-shell structure composed by zero-valent iron and graphitized carbon. • The adsorbent led to a fast removal of DCF, MNZ and SMX (less than 30 min). • The saturated adsorbents were effectively regenerated by heterogeneous Fenton oxidation. • The micropollutant's nature affected the regeneration yield in the order: SMX > DCF > MNZ. Adsorption represents the most plausible technology for micropollutants removal from water nowadays. Nevertheless, the regeneration of the saturated carbon materials is still an important challenge, being these solids in practice commonly disposed. This work aims at overcoming this issue by using innovative carbon-encapsulated iron nanoparticles (CE-nFe). This material was synthesized by a low-cost and green method viz. hydrothermal carbonization (HTC), using olive mill wastewater as carbonaceous source. The solid was fully characterized by different techniques (magnetic properties, elemental analyses, N 2 -sorption isotherms, pH PZC , ICP, XRD and TEM). It showed a clear core-shell structure of around 40 nm in diameter. The core was mainly formed by zero-valent iron and the shell by graphitized carbon. Accordingly, it showed an essentially mesoporous structure, with a specific surface area of 169 m2 g−1, and a clear hydrophobic character (pH PZC = 10). Its adsorption performance was investigated using three relevant micropollutants (diclofenac (DCF), sulfamethoxazole (SMX) and metronidazole (MNZ)). A very fast removal of the micropollutants was achieved (30 min at the most, with rate constants in the range of 0.11–0.41 g mg−1 min−1). The adsorption isotherms revealed the vertical packing of the adsorbate molecules onto the adsorbent active centers, being the data successfully described by the GAB model. The saturated adsorbents were effectively regenerated by heterogeneous Fenton oxidation, taking advantage of the iron core of CE-nFe and the opened mesoporous carbon shell. The regeneration efficiency increased with increasing the operating temperature (25–75 °C) and contact time (1–4 h), as well as the H 2 O 2 dose up to 6 g L-1. The micropollutant nature affected the adsorbent regeneration yield in the order: SMX > DCF > MNZ, consistent with their reactivity towards Fenton oxidation. [ABSTRACT FROM AUTHOR]