Search

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs. [ABSTRACT FROM AUTHOR]

Quantifying the impact of a scholarly paper is of great significance, yet the effect of geographical distance of cited papers has not been explored. In this paper, we examine 30,596 papers published in Physical Review C, and identify the relationship between citations and geographical distances between author affiliations. Subsequently, a relative citation weight is applied to assess the impact of a scholarly paper. A higher-order weighted quantum PageRank algorithm is also developed to address the behavior of multiple step citation flow. Capturing the citation dynamics with higher-order dependencies reveals the actual impact of papers, including necessary self-citations that are sometimes excluded in prior studies. Quantum PageRank is utilized in this paper to help differentiating nodes whose PageRank values are identical. [ABSTRACT FROM AUTHOR]

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing. [ABSTRACT FROM AUTHOR]

Research paper recommenders emerged over the last decade to ease finding publications relating to researchers’ area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user’s expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list. [ABSTRACT FROM AUTHOR]

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a “dying” paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing “offspring”. Practically, this might be used to trace the successive published milestones of a research field. [ABSTRACT FROM AUTHOR]

Fundamental scientific advances can take decades to translate into improvements in human health. Shortening this interval would increase the rate at which scientific discoveries lead to successful treatment of human disease. One way to accomplish this would be to identify which advances in knowledge are most likely to translate into clinical research. Toward that end, we built a machine learning system that detects whether a paper is likely to be cited by a future clinical trial or guideline. Despite the noisiness of citation dynamics, as little as 2 years of postpublication data yield accurate predictions about a paper's eventual citation by a clinical article (accuracy = 84%, F1 score = 0.56; compared to 19% accuracy by chance). We found that distinct knowledge flow trajectories are linked to papers that either succeed or fail to influence clinical research. Translational progress in biomedicine can therefore be assessed and predicted in real time based on information conveyed by the scientific community's early reaction to a paper. [ABSTRACT FROM AUTHOR]

Evaluating the impact of a scholarly article is of great significance and has attracted great attentions. Although citation-based evaluation approaches have been widely used, these approaches face limitations e.g. in identifying anomalous citations patterns. This negligence would inevitably cause unfairness and inaccuracy to the article impact evaluation. In this study, in order to discover the anomalous citations and ensure the fairness and accuracy of research outcome evaluation, we investigate the citation relationships between articles using the following factors: collaboration times, the time span of collaboration, citing times and the time span of citing to weaken the relationship of Conflict of Interest (COI) in the citation network. Meanwhile, we study a special kind of COI, namely suspected COI relationship. Based on the COI relationship, we further bring forward the COIRank algorithm, an innovative scheme for accurately assessing the impact of an article. Our method distinguishes the citation strength, and utilizes PageRank and HITS algorithms to rank scholarly articles comprehensively. The experiments are conducted on the American Physical Society (APS) dataset. We find that about 80.88% articles contain contributed citations by co-authors in 26,366 articles and 75.55% articles among these articles are cited by the authors belonging to the same affiliation, indicating COI and suspected COI should not be ignored for evaluating impact of scientific papers objectively. Moreover, our experimental results demonstrate COIRank algorithm significantly outperforms the state-of-art solutions. The validity of our approach is verified by using the probability of Recommendation Intensity. [ABSTRACT FROM AUTHOR]

Map-matching technology is a key and difficult technology in the development of vehicle navigation systems. Only by correctly identifying the road segment on which the vehicle is traveling can the navigation system make the right decision. At the same time, the complexity of the road network structure and a variety of error factors have introduced great challenges to map matching and have attracted the attention of many researchers as well. This paper analyzes various map-matching algorithms, determines that the key to the matching performance is the junction matching, performs an in-depth study on the junction-matching problem, and puts forward the junction decision domain model. The model mainly involves information regarding the width of the road segment, the angle between two road segments, the accuracy of GPS and the accuracy of the road network. In this paper, we use this model to improve the map-matching algorithm based on a hidden Markov model (HMM). The experimental results show that the improved matching algorithm can effectively reduce the error rate of junction matching and improve the matching performance of a navigation system. [ABSTRACT FROM AUTHOR]

This paper, based on differential privacy protecting K-means clustering algorithm, realizes privacy protection by adding data-disturbing Laplace noise to cluster center point. In order to solve the problem of Laplace noise randomness which causes the center point to deviate, especially when poor availability of clustering results appears because of small privacy budget parameters, an improved differential privacy protecting K-means clustering algorithm was raised in this paper. The improved algorithm uses the contour coefficients to quantitatively evaluate the clustering effect of each iteration and add different noise to different clusters. In order to be adapted to the huge number of data, this paper provides an algorithm design in MapReduce Framework. Experimental finding shows that the new algorithm improves the availability of the algorithm clustering results under the condition of ensuring individual privacy without significantly increasing its operating time. [ABSTRACT FROM AUTHOR]

Recently, computational Grids have proven to be a good solution for processing large-scale, computation intensive problems. However, the heterogeneity, dynamics of resources and diversity of applications requirements have always been important factors affecting their performance. In response to these challenges, this work first builds a Grid job scheduling architecture that can dynamically monitor Grid computing center resources and make corresponding scheduling decisions. Second, a Grid job model is proposed to describe the application requirements. Third, this paper studies the characteristics of commercial interconnection networks used in Grids and forecast job transmission time. Fourth, this paper proposes an application-aware job scheduling mechanism (AJSM) that includes periodic scheduling flow and a heuristic application-aware deadline constraint job scheduling algorithm. The rigorous performance evaluation results clearly demonstrate that the proposed application-aware job scheduling mechanism can successful schedule more Grid jobs than the existing algorithms. For successful scheduled jobs, our proposed AJSM method is the best algorithm for job average processing time and makespan. [ABSTRACT FROM AUTHOR]

This paper proposes SAR imaging algorithm with largest coherence based on the existing SAR imaging algorithm. The basic idea of SAR imaging algorithm in imaging processing is that output signal can have maximum signal-to-noise ratio (SNR) by using the optimal imaging parameters. Traditional imaging algorithm can acquire the best focusing effect, but would bring the decoherence phenomenon in subsequent interference process. Algorithm proposed in this paper is that SAR echo adopts consistent imaging parameters in focusing processing. Although the SNR of the output signal is reduced slightly, their coherence is ensured greatly, and finally the interferogram with high quality is obtained. In this paper, two scenes of Envisat ASAR data in Zhangbei are employed to conduct experiment for this algorithm. Compared with the interferogram from the traditional algorithm, the results show that this algorithm is more suitable for SAR interferometry (InSAR) research and application. [ABSTRACT FROM AUTHOR]

Increasingly, scholarly articles contain URI references to “web at large” resources including project web sites, scholarly wikis, ontologies, online debates, presentations, blogs, and videos. Authors reference such resources to provide essential context for the research they report on. A reader who visits a web at large resource by following a URI reference in an article, some time after its publication, is led to believe that the resource’s content is representative of what the author originally referenced. However, due to the dynamic nature of the web, that may very well not be the case. We reuse a dataset from a previous study in which several authors of this paper were involved, and investigate to what extent the textual content of web at large resources referenced in a vast collection of Science, Technology, and Medicine (STM) articles published between 1997 and 2012 has remained stable since the publication of the referencing article. We do so in a two-step approach that relies on various well-established similarity measures to compare textual content. In a first step, we use 19 web archives to find snapshots of referenced web at large resources that have textual content that is representative of the state of the resource around the time of publication of the referencing paper. We find that representative snapshots exist for about 30% of all URI references. In a second step, we compare the textual content of representative snapshots with that of their live web counterparts. We find that for over 75% of references the content has drifted away from what it was when referenced. These results raise significant concerns regarding the long term integrity of the web-based scholarly record and call for the deployment of techniques to combat these problems. [ABSTRACT FROM AUTHOR]

Biometric recognition technology based on eye-movement dynamics has been in development for more than ten years. Different visual tasks, feature extraction and feature recognition methods are proposed to improve the performance of eye movement biometric system. However, the correct identification and verification rates, especially in long-term experiments, as well as the effects of visual tasks and eye trackers’ temporal and spatial resolution are still the foremost considerations in eye movement biometrics. With a focus on these issues, we proposed a new visual searching task for eye movement data collection and a new class of eye movement features for biometric recognition. In order to demonstrate the improvement of this visual searching task being used in eye movement biometrics, three other eye movement feature extraction methods were also tested on our eye movement datasets. Compared with the original results, all three methods yielded better results as expected. In addition, the biometric performance of these four feature extraction methods was also compared using the equal error rate (EER) and Rank-1 identification rate (Rank-1 IR), and the texture features introduced in this paper were ultimately shown to offer some advantages with regard to long-term stability and robustness over time and spatial precision. Finally, the results of different combinations of these methods with a score-level fusion method indicated that multi-biometric methods perform better in most cases. [ABSTRACT FROM AUTHOR]

This paper presents a novel method on the optimization of bi-objective Flexible Job-shop Scheduling Problem (FJSP) under stochastic processing times. The robust counterpart model and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) are used to solve the bi-objective FJSP with consideration of the completion time and the total energy consumption under stochastic processing times. The case study on GM Corporation verifies that the NSGA-II used in this paper is effective and has advantages to solve the proposed model comparing with HPSO and PSO+SA. The idea and method of the paper can be generalized widely in the manufacturing industry, because it can reduce the energy consumption of the energy-intensive manufacturing enterprise with less investment when the new approach is applied in existing systems. [ABSTRACT FROM AUTHOR]

Phylogenetic networks generalize phylogenetic trees by allowing the modelization of events of reticulate evolution. Among the different kinds of phylogenetic networks that have been proposed in the literature, the subclass of binary tree-child networks is one of the most studied ones. However, very little is known about the combinatorial structure of these networks. In this paper we address the problem of generating all possible binary tree-child (BTC) networks with a given number of leaves in an efficient way via reduction/augmentation operations that extend and generalize analogous operations for phylogenetic trees, and are biologically relevant. Since our solution is recursive, this also provides us with a recurrence relation giving an upper bound on the number of such networks. We also show how the operations introduced in this paper can be employed to extend the evolutive history of a set of sequences, represented by a BTC network, to include a new sequence. An implementation in python of the algorithms described in this paper, along with some computational experiments, can be downloaded from . [ABSTRACT FROM AUTHOR]

Past research on the process of extinguishing a fire typically used a traditional linear water jet falling point model and the results ignored external factors, such as environmental conditions and the status of the fire engine, even though the water jet falling point location prediction was often associated with these parameters and showed a nonlinear relationship. This paper constructed a BP (Back Propagation) neural network model. The fire gun nozzle characteristics were included as model inputs, and the water discharge point coordinates were the model outputs; thus, the model could precisely predict the water discharge point with small error and high precision to determine an accurate firing position and allow for the timely adjustment of the spray gun. To improve the slow convergence and local optimality problems of the BP neural network (BPNN), this paper further used a genetic algorithm to optimize the BPNN (GA-BPNN). The BPNN can be used to optimize the weights in the network to train them for global optimization. A genetic algorithm was introduced into the neural network approach, and the water jet landing prediction model was further improved. The simulation results showed that the prediction accuracy of the GA-BP model was better than that of the BPNN alone. The established model can accurately predict the location of the water jet, making the prediction results more useful for firefighters. [ABSTRACT FROM AUTHOR]

Open source software has been widely used in various industries due to its openness and flexibility, but it also brings potential security problems. Therefore, security analysis is required before using open source software. The current mainstream open source software vulnerability analysis technology is based on source code, and there are problems such as false positives, false negatives and restatements. In order to solve the problems, based on the further study of behavior feature extraction and vulnerability detection technology, a method of using dynamic behavior features to detect open source software vulnerabilities is proposed. Firstly, the relationship between open source software vulnerability and API call sequence is studied. Then, the behavioral risk vulnerability database of open source software is proposed as a support for vulnerability detection. In addition, the CNN-IndRNN classification model is constructed by improving the Independently Recurrent Neural Net-work (IndRNN) algorithm and applies to open source software security vulnerability detection. The experimental results verify the effectiveness of the proposed open source software security vulnerability detection method based on dynamic behavior features. [ABSTRACT FROM AUTHOR]

To solve the problem of the deadline-constrained task scheduling in the cloud computing system, this paper proposes a deadline-constrained scheduling algorithm for cloud computing based on the driver of dynamic essential path (Deadline-DDEP). According to the changes of the dynamic essential path of each task node in the scheduling process, the dynamic sub-deadline strategy is proposed. The strategy assigns different sub-deadline values to every task node to meet the constraint relations among task nodes and the user’s defined deadline. The strategy fully considers the dynamic sub-deadline affected by the dynamic essential path of task node in the scheduling process. The paper proposed the quality assessment of optimization cost strategy to solve the problem of selecting server for each task node. Based on the sub-deadline urgency and the relative execution cost in the scheduling process, the strategy selects the server that not only meets the sub-deadline but also obtains much lower execution cost. In this way, the proposed algorithm will make the task graph complete within its deadline, and minimize its total execution cost. Finally, we demonstrate the proposed algorithm via the simulation experiments using Matlab tools. The experimental results show that, the proposed algorithm produces remarkable performance improvement rate on the total execution cost that ranges between 10.3% and 30.8% under meeting the deadline constraint. In view of the experimental results, the proposed algorithm provides better-quality scheduling solution that is suitable for scientific application task execution in the cloud computing environment than IC-PCP, DCCP and CD-PCP. [ABSTRACT FROM AUTHOR]

In this paper, we propose a spatial lag panel smoothing transition regression (SLPSTR) model ty considering spatial correlation of dependent variable in panel smooth transition regression model. This model combines advantages of both smooth transition model and spatial econometric model and can be used to deal with panel data with wide range of heterogeneity and cross-section correlation simultaneously. We also propose a Bayesian estimation approach in which the Metropolis-Hastings algorithm and the method of Gibbs are used for sampling design for SLPSTR model. A simulation study and a real data study are conducted to investigate the performance of the proposed model and the Bayesian estimation approach in practice. The results indicate that our theoretical method is applicable to spatial data with a wide range of spatial structures under finite sample. [ABSTRACT FROM AUTHOR]

This paper presents a method to reduce a set of n 2D points to a smaller set of s 2D points with the property that the convex hull on the smaller set is the same as the convex hull of the original bigger set. The paper shows, experimentally, that such reduction accelerates computations; the time it takes to reduce from n down to s points plus the time of computing the convex hull on the s points is less than the time to compute the convex hull on the original set of n points. The method accepts 2D points expressed as real numbers and thus extends our previous method that required points as integers. The method achieves a percentage of reduction of points of over 90% in a collections of four datasets. This amount of reduction provides speedup factors of at least two for various common convex hull algorithms. Theoretically, the reduction method executes in time within O(n) and thus is suitable for preprocessing 2D data before computing the convex hull by any known algorithm. [ABSTRACT FROM AUTHOR]

Wang et al. proposed a method for obtaining elliptic curves with embedding degree 1 for securing critical infrastructures, and presented several elliptic curves generated by their method with torsion points of 160 bits and 189 bits orders. They also presented some experimental results and claimed that their implementation of an elliptic curve generated with their method is faster than an implementation for embedded devices presented by Bertoni et al. In this paper, we point out that the security and efficiency claims given by Wang et al. are flawed. Specifically, we show that it is possible to solve finite field discrete logarithm problems defined over their elliptic curves in practice. On the elliptic curves with torsion points of 160 bits orders generated by Wang et al., their instances of finite field discrete logarithm problems are solved in around 4 hours by using a standard desktop PC. On the torsion points of 189 bits orders, their instances are solved in around 10 days by using two standard desktop PCs. The hardness of the finite field discrete logarithm problems is one of the most important bases of security; therefore, their elliptic curves should not be used for cryptographic purposes. [ABSTRACT FROM AUTHOR]

With the increase of the camera resolution, the number of pixels contained in froth image is increased, which brings many challenges to image segmentation. Froth size and distribution are the important index in froth flotation. The segmentation of froth images is always a problem in building flotation model. In segmenting froth images, Otsu method is usually used to get a binary image for classification of froth images, this method can get a satisfactory segmentation result. However, each gray level is required to calculate each of the between-class variance, it takes a longer time in froth images with a large number of pixels. To solve this problem, an improved method is proposed in this paper. Most froth images have the pixel distribution characteristic that the gray histogram curve is a sawtooth shape. The proposed method uses polynomial to fit the curve of gray histogram and takes the characteristic of gray histogram's valley into consideration in Otsu method. Two performance comparison methods are introduced and used. Experimental comparison between Otsu method and the proposed method shows that the proposed method has a satisfactory image segmentation with a low computing time. [ABSTRACT FROM AUTHOR]

Mixed models: Models allowing for continuous heterogeneity by assuming that value of one or more parameters follow a specified distribution have become increasingly popular. This is known as ‘mixing’ parameters, and it is standard practice by researchers - and the default option in many statistical programs - to base test statistics for mixed models on simulations using asymmetric draws (e.g. Halton draws). Problem 1: Inconsistent LR tests due to asymmetric draws:: This paper shows that when the estimated likelihood functions depend on standard deviations of mixed parameters this practice is very likely to cause misleading test results for the number of draws usually used today. The paper illustrates that increasing the number of draws is a very inefficient solution strategy requiring very large numbers of draws to ensure against misleading test statistics. The main conclusion of this paper is that the problem can be solved completely by using fully antithetic draws, and that using one dimensionally antithetic draws is not enough to solve the problem. Problem 2: Maintaining the correct dimensions when reducing the mixing distribution:: A second point of the paper is that even when fully antithetic draws are used, models reducing the dimension of the mixing distribution must replicate the relevant dimensions of the quasi-random draws in the simulation of the restricted likelihood. Again this is not standard in research or statistical programs. The paper therefore recommends using fully antithetic draws replicating the relevant dimensions of the quasi-random draws in the simulation of the restricted likelihood and that this should become the default option in statistical programs. JEL classification: C15; C25. [ABSTRACT FROM AUTHOR]

This paper introduces an optimal sizing algorithm for a hybrid renewable energy system using smart grid load management application based on the available generation. This algorithm aims to maximize the system energy production and meet the load demand with minimum cost and highest reliability. This system is formed by photovoltaic array, wind turbines, storage batteries, and diesel generator as a backup source of energy. Demand profile shaping as one of the smart grid applications is introduced in this paper using load shifting-based load priority. Particle swarm optimization is used in this algorithm to determine the optimum size of the system components. The results obtained from this algorithm are compared with those from the iterative optimization technique to assess the adequacy of the proposed algorithm. The study in this paper is performed in some of the remote areas in Saudi Arabia and can be expanded to any similar regions around the world. Numerous valuable results are extracted from this study that could help researchers and decision makers. [ABSTRACT FROM AUTHOR]

In the Bayesian Reinforcement Learning (BRL) setting, agents try to maximise the collected rewards while interacting with their environment while using some prior knowledge that is accessed beforehand. Many BRL algorithms have already been proposed, but the benchmarks used to compare them are only relevant for specific cases. The paper addresses this problem, and provides a new BRL comparison methodology along with the corresponding open source library. In this methodology, a comparison criterion that measures the performance of algorithms on large sets of Markov Decision Processes (MDPs) drawn from some probability distributions is defined. In order to enable the comparison of non-anytime algorithms, our methodology also includes a detailed analysis of the computation time requirement of each algorithm. Our library is released with all source code and documentation: it includes three test problems, each of which has two different prior distributions, and seven state-of-the-art RL algorithms. Finally, our library is illustrated by comparing all the available algorithms and the results are discussed. [ABSTRACT FROM AUTHOR]

13C metabolic flux analysis (13C-MFA) has been widely used to measure in vivo enzyme reaction rates (i.e., metabolic flux) in microorganisms. Mining the relationship between environmental and genetic factors and metabolic fluxes hidden in existing fluxomic data will lead to predictive models that can significantly accelerate flux quantification. In this paper, we present a web-based platform MFlux () that predicts the bacterial central metabolism via machine learning, leveraging data from approximately 100 13C-MFA papers on heterotrophic bacterial metabolisms. Three machine learning methods, namely Support Vector Machine (SVM), k-Nearest Neighbors (k-NN), and Decision Tree, were employed to study the sophisticated relationship between influential factors and metabolic fluxes. We performed a grid search of the best parameter set for each algorithm and verified their performance through 10-fold cross validations. SVM yields the highest accuracy among all three algorithms. Further, we employed quadratic programming to adjust flux profiles to satisfy stoichiometric constraints. Multiple case studies have shown that MFlux can reasonably predict fluxomes as a function of bacterial species, substrate types, growth rate, oxygen conditions, and cultivation methods. Due to the interest of studying model organism under particular carbon sources, bias of fluxome in the dataset may limit the applicability of machine learning models. This problem can be resolved after more papers on 13C-MFA are published for non-model species. [ABSTRACT FROM AUTHOR]

Ensembles are a well established machine learning paradigm, leading to accurate and robust models, predominantly applied to predictive modeling tasks. Ensemble models comprise a finite set of diverse predictive models whose combined output is expected to yield an improved predictive performance as compared to an individual model. In this paper, we propose a new method for learning ensembles of process-based models of dynamic systems. The process-based modeling paradigm employs domain-specific knowledge to automatically learn models of dynamic systems from time-series observational data. Previous work has shown that ensembles based on sampling observational data (i.e., bagging and boosting), significantly improve predictive performance of process-based models. However, this improvement comes at the cost of a substantial increase of the computational time needed for learning. To address this problem, the paper proposes a method that aims at efficiently learning ensembles of process-based models, while maintaining their accurate long-term predictive performance. This is achieved by constructing ensembles with sampling domain-specific knowledge instead of sampling data. We apply the proposed method to and evaluate its performance on a set of problems of automated predictive modeling in three lake ecosystems using a library of process-based knowledge for modeling population dynamics. The experimental results identify the optimal design decisions regarding the learning algorithm. The results also show that the proposed ensembles yield significantly more accurate predictions of population dynamics as compared to individual process-based models. Finally, while their predictive performance is comparable to the one of ensembles obtained with the state-of-the-art methods of bagging and boosting, they are substantially more efficient. [ABSTRACT FROM AUTHOR]

For high-dimensional and massive data sets, traditional centralized gene expression programming (GEP) or improved algorithms lead to increased run-time and decreased prediction accuracy. To solve this problem, this paper proposes a new improved algorithm called distributed function mining for gene expression programming based on fast reduction (DFMGEP-FR). In DFMGEP-FR, fast attribution reduction in binary search algorithms (FAR-BSA) is proposed to quickly find the optimal attribution set, and the function consistency replacement algorithm is given to solve integration of the local function model. Thorough comparative experiments for DFMGEP-FR, centralized GEP and the parallel gene expression programming algorithm based on simulated annealing (parallel GEPSA) are included in this paper. For the waveform, mushroom, connect-4 and musk datasets, the comparative results show that the average time-consumption of DFMGEP-FR drops by 89.09%%, 88.85%, 85.79% and 93.06%, respectively, in contrast to centralized GEP and by 12.5%, 8.42%, 9.62% and 13.75%, respectively, compared with parallel GEPSA. Six well-studied UCI test data sets demonstrate the efficiency and capability of our proposed DFMGEP-FR algorithm for distributed function mining. [ABSTRACT FROM AUTHOR]

Analyzing and predicting the trend of price fluctuation has been receiving more and more attention, as price risk has become the focus of risk control research in heating oil futures market. A novel time series prediction model combined with the complex network method is put forward in the paper. First of all, this paper counts the cumulative time interval of different nodes in the network, and fits its growth trend with the Fourier model. Then a novel price fluctuation prediction model is established based on the effective information such as some topology properties extracted from the network. The results show that the Fourier model can predict the emergence time of new nodes in the next stage, and the established price fluctuation prediction model can infer the names of nodes in the prediction interval, so as to determine the forward-looking behavior of price evolution. Besides, liken to the NAR neural network, the prediction results obtained by the proposed method also show superiority, which has important theoretical value and academic significance for early warning and prediction of price behavior in the heating oil futures market. [ABSTRACT FROM AUTHOR]

With rapid economic growth since the 21st century, cities in China have experienced considerable economic and social reconstruction. Driven by rapid industrialization, urban spatial structures are undergoing evolution and change. Therefore, this paper analyzes the processes and mechanisms associated with the evolution of the commercial spatial structure in Guangzhou after the financial crisis in 2008 based on both theoretical and empirical analyses. We use a Dirichlet multinomial regression (DMR) model to extract latent semantic information and determine urban functional areas from global positioning system (GPS) and point-of-interest (POI) data collected in Guangzhou in 2009 and 2013. In addition, we use movement patterns and POI data to identify the evolution of Guangzhou's commercial zones from 2009 to 2013. The results show that the urban commercial structure in Guangzhou gradually changed from a single-center model to a multi-center model with dispersed clusters and that the distribution of the entire spatial structure changed. Meanwhile, Guangzhou’s commercial structure not only varied over time but also exhibited specific geographical features. This paper demonstrates that the proposed method can clearly identify the boundary of the commercial area in Guangzhou and provides a valid spatial-temporal model of change in the city. Moreover, this study not only expounds the future development trends of the urban spatial structure in Guangzhou from a microcosmic perspective but also provides a scientific basis for clarifying the spatial locations and development advantages of urban functions within the city. [ABSTRACT FROM AUTHOR]

Since 1997 a considerable effort has been spent on the study of the swap (switch) Markov chains on graphic degree sequences. All of these results assume some kind of regularity in the corresponding degree sequences. Recently, Greenhill and Sfragara published a breakthrough paper about irregular normal and directed degree sequences for which rapid mixing of the swap Markov chain is proved. In this paper we present two groups of results. An example from the first group is the following theorem: let be a directed degree sequence on n vertices. Denote by Δ the maximum value among all in- and out-degrees and denote by the number of edges in the realization. Assume furthermore that . Then the swap Markov chain on the realizations of is rapidly mixing. This result is a slight improvement on one of the results of Greenhill and Sfragara. An example from the second group is the following: let d be a bipartite degree sequence on the vertex set U ⊎ V, and let 0 < c1 ≤ c2 < |U| and 0 < d1 ≤ d2 < |V| be integers, where c1 ≤ d(v) ≤ c2: ∀v ∈ V and d1 ≤ d(u) ≤ d2: ∀u ∈ U. Furthermore assume that (c2 − c1 − 1)(d2 − d1 − 1) < max{c1(|V| − d2), d1(|U| − c2)}. Then the swap Markov chain on the realizations of d is rapidly mixing. A straightforward application of this latter result shows that when a random bipartite or directed graph is generated under the Erdős—Rényi G(n, p) model with mild assumptions on n and p then the degree sequence of the generated graph has, with high probability, a rapidly mixing swap Markov chain on its realizations. [ABSTRACT FROM AUTHOR]

Outlier removal is a fundamental data processing task to ensure the quality of scanned point cloud data (PCD), which is becoming increasing important in industrial applications and reverse engineering. Acquired scanned PCD is usually noisy, sparse and temporarily incoherent. Thus the processing of scanned data is typically an ill-posed problem. In the paper, we present a simple and effective method based on two geometrical characteristics constraints to trim the noisy points. One of the geometrical characteristics is the local density information and another is the deviation from the local fitting plane. The local density based method provides a preprocessing step, which could remove those sparse outlier and isolated outlier. The non-isolated outlier removal in this paper depends on a local projection method, which placing those points onto objects. There is no doubt that the deviation of any point from the local fitting plane should be a criterion to reduce the noisy points. The experimental results demonstrate the ability to remove the noisy point from various man-made objects consisting of complex outlier. [ABSTRACT FROM AUTHOR]

With the convergence of various broadcasting systems, the amount of content available in mobile terminals including IPTV has significantly increased. In this paper, we propose a system that enables users to schedule programs considering both section video clips and full video clips based on the user detection method with similar preference. And, since the system constituting the contents can be classified according to the program, the proposed method can store a program desired by the user, and thus create and schedule a kind of individual channel. Experimental results show that the proposed method has a higher prediction accuracy; this is accomplished by comparing existing channel recommendation methods with the program recommendation methods proposed in this paper. [ABSTRACT FROM AUTHOR]

Analyzing geological drilling hole images acquired by Axial View Panoramic Borehole Televiewer (APBT) is a key step to explore the geological structure in a geological exploration. Conventionally, the borehole images are examined by technicians, which is inefficient and subjective. In this paper, three dominant types of borehole-wall images on coal-rock mass structure, namely, border images, fracture images and intact rock mass images are mainly studied. The traditional image classification methods based on unified feature extraction algorithm and single classifier is not effect for the borehole images. Therefore, this paper proposes a novel two-stage classification approach to improve the classification performance of borehole images. In the first-stage classification, the border images are identified from three kinds of images based on texture features and gray-scale histograms features. For the remaining two types of images, in the second-stage classification, Gabor filter is first applied to segment the region of interest (ROI) (such as microfracture, absciss layer and horizontal cracks, etc.) and the central interference region. Then, using the same feature vector after eliminating the central interference region, fracture images are separated from intact rock mass images. We test our two-stage classification system with real borehole images. The results of experimental show that the two-stage classification method can effectively classify three major borehole-wall images with the correction rate of 95.55% in the first stage and 95% in the second stage. [ABSTRACT FROM AUTHOR]

The integrity of image content is essential, although most watermarking algorithms can achieve image authentication but not automatically repair damaged areas or restore the original image. In this paper, a self-recovery reversible image watermarking algorithm is proposed to recover the tampered areas effectively. First of all, the original image is divided into homogeneous blocks and non-homogeneous blocks through multi-scale decomposition, and the feature information of each block is calculated as the recovery watermark. Then, the original image is divided into 4×4 non-overlapping blocks classified into smooth blocks and texture blocks according to image textures. Finally, the recovery watermark generated by homogeneous blocks and error-correcting codes is embedded into the corresponding smooth block by mapping; watermark information generated by non-homogeneous blocks and error-correcting codes is embedded into the corresponding non-embedded smooth block and the texture block via mapping. The correlation attack is detected by invariant moments when the watermarked image is attacked. To determine whether a sub-block has been tampered with, its feature is calculated and the recovery watermark is extracted from the corresponding block. If the image has been tampered with, it can be recovered. The experimental results show that the proposed algorithm can effectively recover the tampered areas with high accuracy and high quality. The algorithm is characterized by sound visual quality and excellent image restoration. [ABSTRACT FROM AUTHOR]

In this paper we introduce a novel algorithm, called Exogenous Fitness, to calculate the Fitness of subnational entities and we apply it to the states of Brazil. In the last decade, several indices were introduced to measure the competitiveness of countries by looking at the complexity of their export basket. Tacchella et al (2012) developed a non-monetary metric called Fitness. In this paper, after an overview about Brazil as a whole and the comparison with the other BRIC countries, we introduce a new methodology based on the Fitness algorithm, called Exogenous Fitness. Combining the results with the Gross Domestic Product per capita (GDPp), we look at the dynamics of the Brazilian states in the Fitness-Income plane. Two regimes are distinguishable: one with high predictability and the other with low predictability, showing a deep analogy with the heterogeneous dynamics of the World countries. Furthermore, we compare the ranking of the Brazilian states according to the Exogenous Fitness with the ranking obtained through two other techniques, namely Endogenous Fitness and Economic Complexity Index. [ABSTRACT FROM AUTHOR]

Recommender systems are vulnerable to shilling attacks. Forged user-generated content data, such as user ratings and reviews, are used by attackers to manipulate recommendation rankings. Shilling attack detection in recommender systems is of great significance to maintain the fairness and sustainability of recommender systems. The current studies have problems in terms of the poor universality of algorithms, difficulty in selection of user profile attributes, and lack of an optimization mechanism. In this paper, a shilling behaviour detection structure based on abnormal group user findings and rating time series analysis is proposed. This paper adds to the current understanding in the field by studying the credibility evaluation model in-depth based on the rating prediction model to derive proximity-based predictions. A method for detecting suspicious ratings based on suspicious time windows and target item analysis is proposed. Suspicious rating time segments are determined by constructing a time series, and data streams of the rating items are examined and suspicious rating segments are checked. To analyse features of shilling attacks by a group user’s credibility, an abnormal group user discovery method based on time series and time window is proposed. Standard testing datasets are used to verify the effect of the proposed method. [ABSTRACT FROM AUTHOR]

Combining a deep neural network with fuzzy theory, this paper proposes an advertising click-through rate (CTR) prediction approach based on a fuzzy deep neural network (FDNN). In this approach, fuzzy Gaussian-Bernoulli restricted Boltzmann machine (FGBRBM) is first applied to input raw data from advertising datasets. Next, fuzzy restricted Boltzmann machine (FRBM) is used to construct the fuzzy deep belief network (FDBN) with the unsupervised method layer by layer. Finally, fuzzy logistic regression (FLR) is utilized for modeling the CTR. The experimental results show that the proposed FDNN model outperforms several baseline models in terms of both data representation capability and robustness in advertising click log datasets with noise. [ABSTRACT FROM AUTHOR]