Search

In aim to study the influence of circulating ash used as heat carrier and dolomite used as catalyst on mercury transition during the step conversion of coal pyrolysis and combustion, five experiments with different operating conditions were conducted in this study, including four pyrolysis experiments of raw coal, coal/ash, coal/dolomite, coal and ash/dolomite, and combustion experiment of pyrolysis solid product. By changing the experimental conditions including final pyrolysis temperature, heating rate, coal-ash ratio and dolomite type, the transition path and final mercury distribution in the step conversion process were comprehensively analyzed. Experiments results indicated that mercury completely released out from coal when the final pyrolysis temperature was 600 °C. The individual addition of ash could promote the mercury release from coal at lower temperature. Dolomite could catalyze the oxidation of Hg0 in gas phase, and the modified dolomite had better catalytic capacity for Hg0 oxidation than natural dolomite. The addition of circulating ash and natural dolomite both had a certain catalytic effect on Hg0 emission peaks during the coal pyrolysis. Increasing the coal-ash ratio was conducive to the oxidation of Hg0 in pyrolysis gas. During the direct combustion of coal, the content of Hg0 released into the gas phase could reach to 69.97%. By adding ash, ash/natural dolomite and ash/modified dolomite to the coal pyrolysis process, the content of Hg0 in pyrolysis gas decreased to 58.99%, 34.77% and 31.30%, respectively. The research is able to offer the theoretical foundation for mercury contaminants' removal and process optimization of the step conversion technology. • Ash heat carrier can promote the release of mercury in coal at lower temperatures. • Fe 2 O 3 has the strongest catalysis ability towards Hg0. • Dolomite and circulating ash have a synergistic effect on Hg0 oxidation. • The step conversion process greatly reduces the treatment pressure of mercury. [ABSTRACT FROM AUTHOR]

Co-pyrolysis of coal and seaweed can not only effectively decrease the carbon footprint but also improve the quality and output of coal pyrolysis products, however, the influence of seaweed on thermal releasing behaviors of mercury during co-pyrolysis process are still unclear. In this work, the chlorella and Guizhou bituminous coal were mixed and used to reveal the mercury release behavior during co-pyrolysis by the temperature programmed pyrolysis experiments, thermogravimetric and differential thermogravimetric analysis (TG-DTG) and thermogravimetry-mass spectrometry (TG-MS) methods, offering a sufficient explanation on the control technology of mercury pollutants in co-pyrolysis. The results exhibited that a large amount of reducing gases such as CO, H 2 and H 2 O were generated in chlorella at the temperature range of 100-500°C, which was favorable for the transformation from oxidized mercury to elemental mercury, thus remarkably increased the release of elemental mercury in the raw coal sample. The mixed chlorella also significantly lowered the decomposition temperature range (from 400-600 to 300-400°C) of pyrite-bound mercury and decreased the decomposition temperatures of the pyrite-bound mercury species. Additionally, in the co-pyrolysis about 91.82% of mercury was released into the gas phase below 400°C and was 13.77% higher than that of in individual pyrolysis of coal. [Display omitted] [ABSTRACT FROM AUTHOR]