Search

The dual representation of MARX (XRAM) pulse current generator with magnetic flux compression effect is a novel circuit for current multiplication, which has the advantages of both meat grinder and XRAM that are basic circuit topologies. It contributes to the multiplication of current in two aspects: first, increasing current by magnetic flux compression and second, the current can be increased by paralleled inductors. Compared with the standard XRAM topology, the proposed circuit topology can realize a larger factor of current multiplication more easily, and is better than the standard slow transfer of energy through capacitive hybrid meat grinder circuit topology in aspects of scalability and modularity. Meanwhile, its energy density is increased significantly, which is advantageous to the needs of actual electromagnetic launch. In this paper, theoretical analysis is done to illustrate the excellent performance of the proposed topology and preliminary experiment was conducted to demonstrate its feasibility. [ABSTRACT FROM PUBLISHER]

Paralleled pulse-forming units (PFUs) with different triggering delays might be a paramagnetic way for generating flat-topped current wave for electromagnetic launch. Many researchers have reported that multiple capacitive storage PFUs were implemented such current waves in laboratories. However, due to its low energy density, the applications of the capacitive pulsed-power supplies are limited. Since the inductor has advantages in energy density, the inductor pulsed-power supply becomes one of the hottest topics recently. The slow transfer of energy through capacitive hybrid meat grinder with inverse current commutation with semiconductor devices proposed by Tsinghua University has demonstrated its advantage and applicability recently. Using this kind of topology, this paper proposes the design of an inductive storage PFU with a stored energy of 100-kJ. The maximum load current reaches to 50 kA and its pulsewidth is at least 5 ms. The optimized inductive storage PFU shows superiority in contrast to the capacitive storage PFU with the same energy. This paper offers the theoretical analysis and the testing foundation for investigating the inductor pulsed-power supply with higher energy. [ABSTRACT FROM PUBLISHER]

Structural parameters directly affect the energy density and the total resistance of the inductors used in inductive pulse power supply (IPPS). This paper elaborates the relationship between the structural parameters and electrical performances of the inductors used in IPPS and set up the inductors for the experiment in slow transfer of energy through capacitive hybrid meat grinder circuit using air-core flat spirals of strip coil. Then we compile a program that can obtain the structural parameters of the inductors that have the highest energy density under the condition of given charging and discharging currents as well as inductances in the primary and secondary sides. The calculation results of the program are analyzed and verified by the measured values of the real inductors. At the end, on the condition of a constant current density, we put forward a rule that along with the increase in the system energy, the energy density of the IPPS became higher and the resistance of the inductors became lower. [ABSTRACT FROM PUBLISHER]