Search

This article presents a parallel-plate lens beamformer for continuous wide-angle scanning. The design is based on a compact dual-lens system with extended scanning range and is optimized using a previously developed geometrical optics technique. Beam steering is accomplished with a mechanical feed system based on the noncontact characteristic of groove gap waveguides, offering large bandwidth, low profile, and mechanical ruggedness. The proposed concept is validated by an all-metal prototype of a $20.5\lambda $ lens operating in the uplink Ka-band allocated to satellite communications (27.5–31 GHz). Good agreement is obtained between the simulated and measured performances. The measured return loss is greater than 12 dB over the entire frequency band and beyond. High scanning performances are achieved over an angular range of ±50° (±14 beamwidths), with maximum scan losses in the order of 3 dB and good pattern stability over the entire band. The proposed solution is particularly suited for next-generation satellite terminals requiring compact broadband antennas with continuous beam-steering capability over a large angular range. [ABSTRACT FROM AUTHOR]

Multi-beam antennas based on quasi-optical systems feeding a single radiating aperture generate orthogonal beams with a low crossover level between adjacent beams (around −13 dB at most). To circumvent this limitation, we present a circuit architecture allowing the excitation of a quasi-optical system (pillbox system) with two feeds per beam to reach much higher beam crossover levels. To this end, a specific eight-beam passive circuit is designed to cover the 76–86 GHz frequency band. It is based on a single-layer substrate integrated waveguide (SIW) coupler followed by equiphase SIW lines. The maximum phase and amplitude imbalance between the sources are only 35° ($\lambda _{g} / {1g}$ , with $\lambda _{g}$ the wavelength in the SIW lines at the design frequency) and 1.3 dB, respectively, and the isolation is better than −19 dB. The measured beam crossover level of the corresponding antenna is better than −3.2 dB, corresponding to an improvement of 16 dB with respect to single-feed-per-beam pillbox systems. The proposed passive architecture offers beam crossover levels suitable for low-cost electronically controlled multi-beam applications, as for next-generation 5G backhauling systems. [ABSTRACT FROM AUTHOR]

We present here a novel architecture of high-gain continuous transverse stub (CTS) antenna array operating at E-band (71–86 GHz) with reduced sidelobe level (SLL). The antenna consists of an array of 16 long slots excited by a nonuniform parallel-plate waveguide (PPW) corporate feed network. The nonuniform excitation is achieved by the design of asymmetrical power dividers in PPW technology, for which simple analytical models are provided. Full-wave simulations are validated by measurements of a prototype fabricated in aluminum. The SLL is lower than −28 dB in the E-plane. Such an SLL is 15 dB lower than classical parallel-fed CTS arrays. The overall antenna SLL remains below −18 dB over the 75–86 GHz band. Its mean radiation efficiency is 60%, and the maximum efficiency of 85% is reached at 86 GHz. [ABSTRACT FROM AUTHOR]

Wide-angle coverage, fine angular resolution, and low-power consumption are the key characteristics of millimeter-wave short-range wireless systems, such as access points in fifth-generation cellular networks and automotive radars. In this paper, we present a 60 GHz switched-beam antenna system addressing all these requirements. It consists of two identical parallel-fed arrays of eight slots, each fed by a passive pillbox beamformer. A switch network comprising four single-pole-multiple-throw switches excites one of the two arrays at a time and selects the radiated beam. The whole system is fully integrated into a multilayer low-temperature cofired ceramic module. The antenna covers a scan range of about ±39° in one plane using 11 beams between 57 and 66 GHz. The proposed architecture enables the simultaneous achievement of continuous coverage (beam crossover levels of about −3 dB) and of low sidelobe levels. Dedicated numerical tools are used for a preliminary design of the antenna. The design procedure, the technological development, and the experimental results are discussed in detail. [ABSTRACT FROM AUTHOR]

In metasurface (MTS) antennas, a surface wave (SW) is gradually transformed into a leaky wave, owing to the SW interaction with a reactance tensor periodically modulated in the aperture plane. In such antennas, the modulated reactance is typically obtained by subwavelength patches printed on a dielectric substrate. As an alternative technology, we propose the use of a class of metal-only MTSs in the synthesis of the reactance tensor. The absence of dielectric is useful to withstand harsh environments in space applications. The proposed element consists of a metallic cylinder with elliptical cross section, placed on a ground plane and arranged in a square lattice with subwavelength unit cells. This structure is well suited for fabrication by metal additive manufacturing. We have applied the metal cylinders in the design of a right-handed circularly polarized antenna, with broadside pencil beam at Ka-band. The obtained performance has been verified by full-wave simulations. A prototype has been successfully manufactured and measured, showing a good performance. [ABSTRACT FROM AUTHOR]

An amplitude-comparison monopulse slotted waveguide antenna array with a pillbox parabolic quasi-optical beamforming network is proposed in substrate integrated waveguide (SIW) technology in the 24 GHz band. The beamformer is illuminated by a cluster of horn pairs located in the focal plane of the pillbox reflector. Each horn pair is composed of two H-plane sectorial horns connected to a coupler. In-phase and out-of-phase operations of each horn pair allow radiation of the $\Sigma $ and $\Delta $ beams along the antenna scanning plane (E-plane). At the design frequency of 24.15 GHz, the experimental results demonstrate an antenna field of view of ± 26°, with null depth better than −20 dB for all the measured $\Delta $ beams. The antenna gain varies between 21.6 and 20.5 dBi for the $\Sigma $ beams and the measured input reflection bandwidth is about 2.4% for VSWR < 2. [ABSTRACT FROM PUBLISHER]

An integrated solution for the development of multilayer antenna modules for fifth-generation (5G) communications, based on low temperature cofired ceramic (LTCC), is presented. The design exploits the 3-D integration capabilities of the LTCC process, enabling the realization of a full-corporate feed network (CFN) in vertical configuration. A novel implementation of the CFN employing dielectric-embedded parallel plate waveguides (PPWs) is proposed. The PPW lines are delimited by via-rows. As opposed to standard substrate-integrated waveguide feed networks, guided fields are orthogonal to the via-rows and propagate along the vertical axis of the structure. The CFN feeds four long slots, without any coupling structure, and provides broadband operation. The final prototype comprises 18 LTCC tapes, with a total thickness of 3.4 mm. The measured −10-dB impedance bandwidth spans from 51.2 to 66 GHz (>25.2%). The module generates a fixed broadside beam, but multibeam operation in $H$ -plane can be easily achieved. In the 50–66-GHz band, the peak gain is 14.25 dBi and the average first side-lobe level in $H$ -plane is −20.6 dB. The proposed technology and the design concept are suited for highly integrated millimeter-wave systems, such as access points in the future $V$ -band high data-rate wireless networks. [ABSTRACT FROM PUBLISHER]

A novel dual-layer multibeam pillbox antenna with a slotted waveguide radiating part in substrate-integrated waveguide (SIW) technology is proposed. In contrast to previous works, the design goal is to have a multibeam antenna with arbitrary low sidelobes and at the same time a high crossing level between adjacent radiated beams. These two constraints cannot be satisfied simultaneously for any passive and lossless multibeam antenna systems with a single radiating aperture due to beam orthogonality. Here, this limitation is overcome using the “split aperture decoupling” method which consists in using two radiating apertures. Each aperture is associated with a pillbox quasi-optical system with several integrated feed horns in its focal plane so as to steer the main beam in the azimuthal plane. The antenna operates at 24.15 GHz and presents very good scanning performance over an angular sector of \pm 40^\circ , with a good agreement between full-wave simulations and measurements. The crossover level between adjacent beams is about - 3\;{\text {dB}} with a sidelobe level lower than - 24\;{\text{dB}}$ for the central beam and better than - 11\;{\text{dB}} for the extreme beam positions. The isolation between feed horns in the same pillbox system is better than 20 dB. [ABSTRACT FROM PUBLISHER]