Search

We present elastic moduli, gamma radiation attenuation characteristics, and transmission factor of barium–tungstate–phosphate (BTP) glasses with the chemical formula (60-y)BaO-yWO3-40P2O5, where y = 10 (S1)–40 (S4) in steps of 10 mole%. Different types of mathematical and simulation approaches, such as the Makishima-Mackenzie model, the Monte Carlo method, and the online Phy-X/PSD software, are utilized in terms of determining these parameters. The total packing density (Vt) is enriched from 0.607 to 0.627, while the total energy dissociation (Gt) is enriched by increasing the WO3 content (from 52.2 (kJ/cm3). In the investigated glasses, increasing tungstate trioxide (WO3) contribution enhanced Young's, shear, bulk, and longitudinal moduli. Moreover, Poisson's ratio is improved by increasing the WO3 content in the BTP glasses. The 20BaO-40WO3-40P2O5 sample possessed the highest values of both linear (µ) and mass attenuation (µm) coefficients, i.e., (µ, µm)S4 > (µ, µm)S3 > (µ, µm)S2 > (µ, µm)S1. Moreover, the 20BaO-40WO3-40P2O5 sample had the lowest values of half (HVL) and tenth (TVL) layers, i.e., (half, tenth)S4 < (half, tenth)S3 < (half, tenth)S2 < (half, tenth)S1. The effective atomic number (Zeff) of the studied glasses has the same behavior as µ and µm. Finally, the 20BaO-40WO3-40P2O5 is reported with the minimum values of transmission factor (TF) for all the BTP investigated at a thickness of 3 cm. In conclusion, the sample with composition 20BaO-40WO3-40P2O5 which has the maximum WO3 reinforcement may be a beneficial glass sample, along with its advanced mechanical and gamma ray shielding properties. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the interaction parameters of antioxidant molecules in some spices and vegetables with gamma radiation. At first, mass attenuation coefficients (MACs, cm2/g) of gingerol, rosmarinic acid, quercetin, curcumin, eugenol, piperine, allicin, and capsaicin molecules were determined at the photon energies (13–1332 keV) emitted from the radioactive isotopes Am-241, Ba-133, Co-60, and Cs-137 with the help of the EpiXS and WinXCOM programs. The smallest and largest MAC values were found as 1.20 and 8.48 cm2/g at 13 keV and 0.059 and 0.058 cm2/g at 1332 keV for eugenol and allicin, respectively. It was observed that both results support each other. Using the MAC values, the effective atomic number and electron density (Zeff and Neff) values of the molecules were derived. The Zeff values for gingerol and allicin were obtained in the range of 5.79–3.40 and 13.85–4.53, respectively. The variation of the buildup factors of antioxidants in the range of 0.015–15 MeV depending on the chemical composition and penetration depth were also examined. It was noticed that the photon accumulation was the lowest in allicin and the highest in gingerol and eugenol. The results obtained from this study will make an essential contribution to dose calculations in food irradiation studies. [ABSTRACT FROM AUTHOR]

Natural radioactivity, radiological hazard, and petrological studies of Homrit Waggat granitic rocks, Central Eastern Desert, Egypt were performed in order to assess their suitability as ornamental stone. On the basis of mineralogical and geochemical compositions, Homrit Waggat granitic rocks can be subdivided into two subclasses. The first class comprises granodiorite and tonalite (I-type) and is ascribed to volcanic arc, whereas the second one includes alkali-feldspar granite, syenogranite, and albitized granite with high-K calc alkaline character, which is related to post-orogenic granites. 238U, 226Ra, 232Th, and 40K activities of natural radionuclides occurring in the examined rocks were measured radiometrically using sodium iodide detector. Furthermore, assessment of the hazard indices—such as: annual effective dose (AED) with mean values (0.11, 0.09, 0.07, 0.05, and 0.03, standard value = 0.07); gamma radiation index (Iγ) with mean values (0.6, 0.5, 0.4, 0.3, and 0.14, standard value = 0.5); internal (Hin) with mean values (0.6, 0.5, 0.4, 0.3, and 0.2, standard value = 1.0); external (Hex) index (0.5, 0.4, 0.3, 0.24, and 0.12, standard value = 1.0); absorbed gamma dose rate (D) with mean values (86.4, 75.9, 53.5, 43.6, and 20.8, standard value = 57); and radium equivalent activity (Raeq) with mean values (180, 154, 106.6, 90.1, and 42.7, standard value = 370)—were evaluated with the knowledge of the natural radionuclides. The result of these indices falls within the acceptable worldwide limits. Therefore, we suggest that these rocks are safe to be used in industrial applications. [ABSTRACT FROM AUTHOR]

In this study, the monotonic effect of Ta2O5 and ZrO2 in some selected borotellurite glasses was investigated in terms of their impact on gamma-ray-shielding competencies. Accordingly, three niobium-reinforced borotellurite glasses (S1 : 75TeO2 + 15B2O3 + 10Nb2O5, S2 : 75TeO2 + 15B2O3 + 9Nb2O5 + 1Ta2O5, and S3 : 75TeO2 + 15B2O3 + 8Nb2O5 + 1Ta2O5 + 1ZrO2) were modelled in the general-purpose MCNPX Monte Carlo code. They have been defined as an attenuator sample between the point isotropic gamma-ray source and the detector in terms of determining their attenuation coefficients. To verify the MC results, attenuation coefficients were then compared with the Phy-X/PSD program data. Our findings clearly demonstrate that although some behavioral changes occurred in the shielding qualities, modest improvements occurred in the attenuation properties depending on the modifier variation and its magnitude. However, the replacement of 2% moles of Nb2O5 with 1% mole of Ta2O5 and 1% mole of ZrO2 provided significant improvements in both glass density and attenuation properties against gamma rays. Finally, the HVL values of the S3 sample were compared with some glass- and concrete-shielding materials and the S3 sample was reported for its outstanding properties. As a consequence of this investigation, it can be concluded that the indicated type of additive to be added to borotellurite glasses will provide some advantages, particularly when used in radiation fields, by increasing the shielding qualities moderately. [ABSTRACT FROM AUTHOR]

The purpose of this research was to investigate the shielding characteristics of high-amount heavy metal oxide and Eu3+-activated borate glasses based on 10La2O3–50HMO–(40–x) B2O3–xEu2O3 (x = 0, 0.5, 1, 2, and HMO = PbO, Bi2O3). Critical gamma radiation attenuation characteristics, particularly mass attenuation coefficients of investigated heavy metal oxide glass samples, were determined using Monte Carlo simulations and the Phy-x/PSD software. Following that, we looked at the half-value layer, mean free path, effective atomic number, and build-up factors across a broad energy range (0.015–15 MeV). According to the study's results, the addition of Eu2O3 enhanced the mass attenuation coefficient and effective atomic number, while reducing the half-value layer, mean free path, and accumulation factors. In terms of gamma radiation attenuation, the LBi50BEu glass system surpassed the LPb50BEu glass system in terms of overall shielding properties against nuclear radiation. Additionally, the heavy metal oxide glass' efficacy as a neutron shield was determined using fast neutron removal cross-sections (ΣR). LBi50BEu2 glass was shown to be more effective in preventing the penetration of charged particle radiation. [ABSTRACT FROM AUTHOR]

This study aimed to perform an investigation for the potential implementation of bismuth silicate glasses as novel shield equipment instead of ordinary shields in nuclear medicine facilities. Accordingly, a group of Bi2O3 reinforced silicate glass system were investigated and compared with ordinary shields in terms of their gamma-ray attenuation properties in diagnostic nuclear medicine radioisotope energies emitted from 99mTc, 111In, 67Ga, 123I, 131I, 81mKr, 201Tl, 133Xe. Mass attenuation coefficient (μ m)   results for glass samples were calculated comparatively with the XCOM program and MCNPX code. The gamma-ray attenuation parameters such as half value layer (HVL), tenth value layer (TVL), mean free path (MFP), effective atomic number (Zeff) were obtained in the diagnostic gamma ray energy range from 75 to 336 keV. To confirm the attenuation performance of superior sample, obtained results were extensively compared with ordinary shielding materials. According to the results obtained, BISI6 glass sample with the highest Bi2O3 additive has an excellent gamma-ray protection. [ABSTRACT FROM AUTHOR]

In this study, brass (Cu/Zn) reinforced polymer composites with different proportions of brass powders were fabricated. Different types of nuclear shielding parameters such as mass and linear attenuation coefficients, radiation protection efficiency, half and tenth value layers, and effective atomic number values were determined experimentally and theoretically in the energy range of 0.060–1.408 MeV in terms of gamma-ray shielding capabilities of fabricated polymer composites. A high Purity Germanium detector (HPGe) in conjunction with a Multi-Channel Analyzer (MCA) and twenty-two characteristic gamma-ray energies have been used in the experimental phase. In addition, the exposure and energy absorption buildup factors of reinforced Cu/Zn composites were calculated, and relative dose distribution values were computed to verify them. Proton mass stopping power (ΨP), proton projected range (ΦP), alpha mass stopping power (ΨA), and alpha projected range (ΦA) parameters, which indicate the interactions of the produced composites with charged particle radiation, were investigated. Fast neutron removal cross-section (ΣR) results were determined to give an idea in terms of neutron shielding. According to the obtained results, it is reported that the CuZn20 coded sample's ability to attenuate gamma-ray and charged particle radiation is more efficient than that of other prepared composites. A CuZn05 coded sample was found to be more suitable for neutron shielding capability. [ABSTRACT FROM AUTHOR]

This study aimed to investigate different types of glasses based on the 46V2O5-46P2O5-(8-x) B2O3-xCuO system in terms of their nuclear radiation shielding properties. Accordingly, five different CuO-doped vanadate glasses were investigated extensively to determine the necessary gamma shielding parameters along with effective conductivity at 300,000 and buildup factors. Phy-x PSD software was used for determination of these vital parameters. Furthermore, these parameters, such as half value layer, tenth value layer, and mean free path were investigated in a broad energy range between 0.015 and 15 MeV. The results revealed that the amount of CuO reinforced in each sample plays an essential role in determination of the shielding abilities of the samples. The sample with the highest CuO content had the highest linear attenuation coefficient and mass attenuation coefficient values. Additionally, the lowest mean free path, half value layer, and tenth value layer values were recorded for glass sample VPCu8. There was an inverse relation between the effective conductivity and effective atomic number and photon energy; that is, as energy increases, the effective conductivity and effective atomic number decreased rapidly, especially in the regions of low energy. Glass sample VPCu8 reported the highest values for both parameters. Moreover, glass sample VPCu8 had the lowest exposure buildup factor and energy absorption buildup factor values. Our findings showed that CuO-reinforced vanadate glass composition, namely 46V2O5-46P2O5-8CuO, with a glass density of 2.9235 g/cm3, was reported to have superior gamma ray attenuation properties. These results would be helpful for scientists in determining the most appropriate additive rare earth type, as well as the most appropriate glass composition, to offer shielding characteristics similar to those described above, taking into consideration the criteria for usage and the needs of the community. The results of this research will be useful to the scientific community in evaluating the prospective characteristics of CuO-doped glass systems and related glass compositions. CuO-doped glass systems and associated glass compositions have a wide range of properties. [ABSTRACT FROM AUTHOR]

Gamma-ray shielding properties of high dense glassy system (bismuth fluoro-lead-borate doped with chromium (III) ions) with composition of (25-x)PbF 2 –25Bi 2 O 3 –49.8B 2 O 3 –0.2Cr 2 O 3 - xCaF 2 - (where x = 0 (S1), 5 (S2), 10 (S3), 15 (S4), 20 (S5), and 25 (S6) mol%) have been investigated. Phy-X/PSD software was used to achieve this purpose in photon energy range (0.15–15 MeV). Additionally, the superior glass shield sample was compared to several types of glass and concrete shields. Results revealed that each photon energy value investigated the maximum linear attenuation coefficient (µ m) values for the S1 glass sample with the heaviest element contribution in its structure were detected at the maximum level. In terms of the µ m , there was a difference of roughly 0.5 cm2/g in the S1 and S6 glasses. The S1 sample with the highest µ m also had the lowest T 0.5 and mean free path (λ). The heavy element contribution to the S1 sample was reflected in the effective atomic number values, which provided the S1 sample with the highest Z eff values. Values of exposure and energy absorption buildup factors (EBF and EABF) were confirmed that the sample S1 has the minimum values. Our findings showed that S1 sample may be considered as superior gamma-ray shielding properties among all studied glasses. • Bismuth fluoro-lead-borate doped with chromium (III) ions glasses have been fabricated. • Phy-X/PSD software was applied. • Radiation shielding capacities have been examined. • Glasses were superior for gamma-ray shielding. [ABSTRACT FROM AUTHOR]