Search

High-power current sources with high dynamic performance, ultralow current ripple, and absolute reference tracking accuracy are the key elements for magnets (bumper and septum) that are used in accelerators. Similar requirements are also encountered in plasma research applications in fusion reactors, as well as plasma research for the future high voltage direct current circuit breakers. Therefore, the current source must be able to drive resistive/inductive and highly fluctuating loads without any compromise in its performance. In this paper, such a flexible, dynamic, and accurate current source is introduced, which able to provide amplitudes up to 30 kA and bipolar voltages up to 10 kV. The system’s operating concept is presented and its design procedure in order to fulfill a list of demanding specifications is demonstrated. In addition, a detailed description of its near-optimal, advanced control system is presented. Finally, the theoretical considerations are verified by extensive simulation results for various operating scenarios, including driving chaotic arc loads. [ABSTRACT FROM AUTHOR]

In this paper, the results of a 2.88-MW solid-state long-pulse modulator, which has been designed for the new linear collider at the european spallation source in Lund, are summarized. The presented modulator generates an output voltage pulse of 115 kV with a pulselength of 3.5 ms. The main components of the modular system, which include a series–parallel resonance converter, a high-voltage high-frequency transformer, and an output rectifier, are discussed. The modulator design is verified by measurements performed with a full-scale prototype, which is operated under nominal load conditions. A detailed output voltage ripple evaluation is given, and in addition, the system design has been proven by a 7- and 2/3-h heat run test. All specifications are well within the given limits, and the maximum occurring temperatures in the transformer stay below 110 °C even under worst case assumptions. The system achieves a pulse efficiency (determined by the pulse shape) of 96.78%, an overall electrical system efficiency of 91.9%, and a combined pulse system efficiency of 89%. [ABSTRACT FROM AUTHOR]

This paper presents the design of an ultraprecise 127-MW/3- \mu \textrm s solid-state modulator with split-core transformer. The modulator consists of a power supply, 12 pulse generator modules with active core reset, and a split-core transformer with six cores. In addition, an $LC$ bouncer could be used to compensate the droop of the pulse. This paper includes the design and analysis of the pulse transformer. A volume minimal transformer is investigated for different load capacitances to investigate the achievable rise time and the parameters which can be used to adjust the damping. In addition, the influence of the pulse transformer on the synchronization of the switches is investigated using an enhanced reluctance model. In addition, an $LC$ bouncer circuit is investigated. A multiobjective optimization is performed which shows the required energy of the bouncer for a certain pulse ripple. The flat-top ripple of the presented modulator can be reduced to 0.2%. Because the bouncer degrades the flat-top stability, the bouncer is not implemented. Measurements of the overall system include short-circuit measurements and flat-top stability measurements. They show that the modulator is short-circuit capable. Furthermore, the flat-top stability is determined to be less than 10 ppm at an output voltage of 360 kV. [ABSTRACT FROM PUBLISHER]

In this paper, a high-dynamic and high-precise optical current measurement system based on the Faraday effect is presented. First, the sensor concept is presented and different sensor constructions are analyzed. Then, a measurement system based on a rare-earth iron garnet film is investigated. The measurement system uses multiple signal processing channels to increase the signal-to-noise ratio. Furthermore, the measurement range exceeds a rotation of 180° and therefore requires a counting mechanism to count the number of rotations. Finally, the precision of the presented system is analyzed. The precision is determined to be 4.9 ppm at a rotation range of 3300°. [ABSTRACT FROM PUBLISHER]

This paper presents the interleaved operation of a soft-switching boost converter operated in boundary conduction mode. First, the operating principle of the converter as well as the basic concept of the interleaving is presented. Then, the dynamic behavior is modeled using the z-transform to obtain a converter model that is independent of the switching frequency. With the model, the stability of the closed-loop system with a proportional–integral (PI) controller is analyzed. It is shown that an adaptive PI controller can be easily implemented to achieve a minimal settling time over a wide operating range. Finally, the controller is validated with two converters with a 40-kW nominal output power and an output voltage of 3 kV. The tests at different output voltages under different load conditions show a stable interleaved operation. [ABSTRACT FROM PUBLISHER]

Modern accelerator driven experiments like linear colliders or spallation sources are supplied by RF amplifiers using klystrons. The cathode voltage for these klystrons can be generated by long pulse modulators generating highly accurate voltage pulses in the length of milliseconds. Conventional designs using pulse transformers become huge for long pulses. The series-parallel resonant converter (SPRC) topology avoids this drawback as the transformer is operating at high frequencies. This paper presents a comprehensive design approach for SPRC modules, which is based on an optimization procedure containing an electrical model of the resonant circuit and a thermal model of the semiconductors. In addition, an insulation and a leakage design procedure and a thermal model of the transformer are also presented. Finally, this procedure provides the optimal design parameters of the resonant circuit elements. With these parameters, a global optimizer chooses the optimum amount of modules connected in series and/or in parallel to fulfill the given restrictions. The efficiency of a basic SPRC-module is 94.7% with a pulsed power density of 4.63 kW/l. [ABSTRACT FROM PUBLISHER]

In this paper, limitations of compact and durable solid state modulators, using a 4.5-kV IGBT in combination with a pulse compression (PC) circuit are evaluated. Two investigated modulators uses two separate paths: one for ignition voltage and one for high currents. In the first modulator, ignition voltage is generated with a PC circuit based on saturable transformers, which is used to charge a series capacitor. After saturation, the capacitor is connected to the output. The second modulator combines together pulse transformer and magnetic switch. Parasitics have been estimated to find the optimal modulator configuration. Measurement results for validating the models as well as the simulation results are presented. Main limitation factors are described and possible solutions are discussed. [ABSTRACT FROM PUBLISHER]

In this paper, an analytical method to model the thermal resistance of windings made either of solid or litz wire is presented and validated by measurements. In addition, an extended numerical approach for litz wire windings, which also considers the twist pitch, is shown. With the presented model, it is possible to describe the thermal resistance of arbitrary wire arrangements. This approach can be used in straightforward thermal designs of magnetic devices, or it can be integrated in optimization procedures to improve the thermal designs of magnetic components. The analytical models are verified by measurements with nonpotted and epoxy-potted solid wire test setups and test setups for litz wire, which all show a good matching between the calculated and measured values. Besides the models for the thermal resistance between the winding layers, a method to simplify the thermal network of multilayer windings is presented. Finally, a thermal equivalent circuit of a test transformer has been calculated, which shows a good match between the measured and the predicted temperature distribution. [ABSTRACT FROM AUTHOR]

In this paper, two control strategies for voltage balancing in a modular serial parallel resonant converter modulator system, which is used in a high-voltage-pulsed power application, are presented and verified by simulations and measurements. The system is based on two series parallel resonant converter modules, forming an input series output parallel stack. To obtain the given output voltage pulse of 115 kV, nine of these input series output parallel stacks are connected in parallel at the input and in series at the output, forming an input parallel output series system. A robust input voltage balancing by an auxiliary circuit and an output voltage balancing by control is introduced and proven by measurements. In addition, an alternative approach, where the input and output voltage balancing is achieved purely by control, is given and verified by simulations. For designing the control of this system, a large and a small signal model is derived and the influence of component tolerances is investigated. [ABSTRACT FROM AUTHOR]

In highly efficient converter systems, the power consumption of the cooling system (fans) significantly influences the total system efficiency as well as the power density. This paper investigates the potential of free convection cooled heat sinks and compares their performance to forced convection cooled heat sinks on the basis of their volume and power consumption. Underlying theoretical concepts for both types of cooling systems are summarized and their application in an optimization procedure is presented. The theoretical concepts are validated with prototype heat sinks. Finally, at an example of a half-bridge converter, it is shown that by free convection cooling, not only the efficiency but also the power density can be increased. In this case, by paralleling semiconductor devices the losses decrease approximately by a factor of three while simultaneously the heat sink volume can be reduced by approximately 50%. [ABSTRACT FROM AUTHOR]

A design and optimization procedure for high-voltage pulse transformers is presented. The procedure is enhanced by the integration of core loss measurements under pulsed excitation, by electrical peak field calculations and by checking of the isolation distances, which are compared to scaled high-voltage breakdown data. The procedure is applied with specifications of the compact linear collider, and the sensitivity of system parameters such as the number of primary turns, core material, transformer oil, and high-voltage cable length is investigated by comparing their Pareto fronts. With amorphous core material, the highest efficiency is achieved. Replacing mineral oil by natural ester results in an efficiency reduction of 0.5%, and an increase in HV cable length from 1.5 to 5 m reduces the efficiency by 0.6%. Finally, the optimized transformer’s pulse shape is investigated over the entire load range. [ABSTRACT FROM PUBLISHER]

Medium and high beta cavities used in linear colliders or spallation sources are supplied by klystrons or inductive output tubes amplifiers. The cathode voltage for these amplifiers can be generated by long-pulse modulators generating highly accurate high voltage pulses in the length of milliseconds. With existing modulator topologies, all the demanding requirements like fast pulse rise time, high accuracy, and low voltage ripple hardly can be satisfied at the same time. Common designs like bouncer modulator topologies using pulse transformers become huge for long pulses. The series–parallel resonant converter (SPRC) avoids this drawback as the transformer is operated at high frequencies. In this paper, the comprehensive multidomain model of an SPRC including an electrical model of the inverter, a magnetic model, and an isolation design procedure of the transformer is verified with a prototype of a single module operated under full-load conditions. In addition, a comparison between the predicted parasitics like leakage inductance and stray capacitance of the transformer and the measured values are given. An evaluation of the isolation of the transformer, which is especially crucial for a series connection of the modules, is also performed. In addition, different possibilities to realize the desired series inductance are discussed. [ABSTRACT FROM PUBLISHER]