Search

The fundamental principle of the transient state control method for turbofan engines, which is based on the acceleration ratio of high-pressure rotational speed (N-dot), involves sacrificing a portion of the safety margin to obtain satisfactory acceleration performance. However, it could induce surge in the engine's compressor. To prevent the destructive damage caused by surge to both the engine and its components, a surge-elimination control strategy for the engine based on an N-dot controller is proposed. First, the engine mathematical model, which incorporates the effects of engine volumetric dynamics, stall zone characteristics, and combustion chamber flameout characteristics, is established to simulate surge mechanism. Subsequently, the acceleration schedule of the N-dot is calculated by employing sequential quadratic programming (SQP) algorithm to solve the multiconstraint optimization problem, while designing the transition state controller of N-dot based on a high-order filter. Finally, the surge detection logic and surge-elimination strategy based on the µ-correction method are proposed and designed to realize active control of surge elimination. The simulation results demonstrate that the N-dot control method offers significant advantages in mitigating the steady-state errors resulting from inevitable engine degradations. The surge state is effectively suppressed by the proposed surge-elimination control method, and the surge duration is significantly shorten during the acceleration phases. Furthermore, compared to the one without any surge-elimination control, the proposed method decreases the acceleration time by 5.53%. [ABSTRACT FROM AUTHOR]

In order to overcome the problem of significant drop in operational efficiency remarkably while power turbine speed varies among a large range, an optimal speed control method of multiple turboshaft engines based on sequential shifting control (SSC) algorithm is proposed. Firstly, combined with multispeed gearboxes, a sequential shifting control algorithm of multiple turboshaft engines is proposed and designed to accomplish continuously variable speed control. Then, selecting the minimum engine fuel flow as the optimization objective, an integrated optimization method of optimal speed based on multiple engines and multispeed gearboxes is proposed to promote the operational economy. Finally, the simulation tests of the optimal speed control method of twin and triple turboshaft engines are conducted separately. The results demonstrate that the optimal speed control method of multiple turboshaft engines based on SSC algorithm can change the power turbine speeds by no more than 7% and the main rotor speed by over 8% simultaneously. In addition, compared with the fixed-ratio transmission (FRT), engine fuel flows decrease by more than 2% under different cruise states. It proves that the optimal speed control method is beneficial to obtain more superior overall performances of the integrated helicopter/multi-engine system without considerable loss of compressor surge margin. [ABSTRACT FROM AUTHOR]