Search

Facing the challage of energy conservation and emission reduction in the building sector, most energy saving strategies of central heating only focus on the performance improvement of building envelope, ignoring the impact of energy use behavior. This paper proposed a building energy conservation strategy based on energy use behavior analysis, which provides a perspective for in-depth exploration of building energy conservation. After investigating a typical university in the northern China, the energy use behaviors were characterized and two different DeST energy consumption models before or after considering energy use behavior were established. By comparing the results calculated by these two models, the impact of energy use behavior analysis on building energy consumption was quantitatively analyzed. The results show that the heating energy consumption and carbon emission can be reduced by 23.28% and 23% respectively through the proposed strategy based on energy use behavior. Therefore, the analysis of energy use behavior can provide a theoretical basis for heating operators to make decisions on energy supply regulation. With central cooling and heating further popularizing in the future, the research methodology of this paper has more extensive reference value for energy conservation and emission reduction strategies in the building sector. [ABSTRACT FROM AUTHOR]

• Accordingly, a flexible traction power supply system (FTPSS) composed of a TT and multi-port power hub and its coordinated control strategy are proposed for VU compensation and energy conservation in this paper. The main contributions can be summarized as follows: • Different from previous research, a power hub is installed in the TPSS to achieve power flow control among the utility grid, traction network, and DC grid. The FTPPS with the power hub can enable VU compensation for the utility grid, which also offers a friendly interface with distributed PV and ESS for on-site access. • A three-port VU compensation method based on active power flow control and reactive power injection is presented, which divides the system demand compensation capacity and reduces the performance requirements for power electronics, compared with traditional compensation methods. • A coordinated control strategy with a hierarchical structure is designed for FTPSS. The control strategy enables real-time power management to enhance energy utilization and mitigate VU in the system layer and coordinates multiple converters to realize the multi-function operation of the system in the converter layer. To mitigate voltage unbalance (VU) and eliminate the neutral sections while reducing the energy consumption of railways, a flexible traction power supply system (FTPSS) with the power hub is proposed. Different from conventional schemes, the proposed system provides a friendly interface to realize the on-site access of distributed photovoltaic (PV) generation along the railway line and concentrated integration of energy storage systems. The power flow is centrally managed by the power hub to reduce energy consumption and the proposed three-port VU compensation method is coupled with the power hub to suppress negative sequence current caused by trains. Considering the volatility of PV generation and traction loads, four operation modes including grid-connected, valley filling, VU compensation, and peak clipping mode, are proposed to dynamically regulate the operation of FTPSS. Moreover, a coordinated control strategy with a hierarchical structure is developed to enable the operation modes. The strategy is implemented with a global controller and multiple local controllers, which can realize real-time power management and flexible transition among different modes. Finally, different simulation and experimental case studies based on the field data are carried out to comprehensively verify the feasibility and effectiveness of the proposed FTPSS and control strategy. [ABSTRACT FROM AUTHOR]

[Display omitted] • The influencing factors on energy efficiency of data center are reviewed. • Energy efficiency metrics are classified according to different priorities. • Appropriate metrics should be selected according to data center function for optimization. • Metrics are analyzed by hierarchy according to the degree of sustainable development. • Challenges and gaps are highlighted and suggestions are given for future works. The rapid development of the Internet requires data center infrastructures to be extended to a large scale with a higher power capacity and a reduction in energy consumption and carbon emissions. It is of great significance for this application to reduce energy consumption, capital cost and carbon emissions while ensuring a safe and reliable data center operation. Evaluation metrics have been considered an effective method to assess the energy efficiency of data centers and have been widely used in various data centers for many years. This work reviews the latest progress of data center evaluation metrics development in recent 20 years. Energy efficiency metrics are summarized based on energy conservation, eco-design and data center security, with the advantages and disadvantages and their correlations discussed. The applicability of each metric is analyzed. The influencing factors of energy efficiency of data centers discussed include site selection, IT equipment, power supply and distribution systems, cooling systems, building structure, and temperature control. The results show that the current evaluation metrics are valuable for the assessment of energy saving of data centers. However, more comprehensive and multi-scale evaluation metrics combining energy consumption, eco-design and data center security are needed to accelerate the progress towards carbon neutrality. In this paper, the hierarchy analysis of metrics is carried out according to sustainability, and metrics in line with sustainable development should be used preferentially. [ABSTRACT FROM AUTHOR]